Jump to content

Recommended Posts

oh god yes, we ran mid 13's on a mild cam and the gm heads. We ran 12.13 on motor before the roll cage and now with the roll cage 12.22 is the best we can do on motor at about 9.4:1 ratio now. 11.40 is the best off a 100 shot, but could have been better had i backed the timing down a bit.



that pretty good to hrear

Link to post
Share on other sites

If I were picking a cam for that truck I'd go with the X4254H (part number 12-235-2) from Comp Cams. That should have plenty of torque to get you past the crappy stock stall and pull well to a little over 5k. As long as the stock valve springs aren't too tired you should be able to re-use them. If you do end up replacing the intake with a new one, I'd go with the Performer Air Gap.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...