stickler88 Posted November 3, 2018 Report Share Posted November 3, 2018 So my throttle body is clean, my connector and connections are good. But when at a light it stumbles for a split second once out of 3 times. So it doesn't always do it. Pulled the plugs and even replaced them with iridium which were in there to begin with. Good color, not lean or rich. Replaced the wires and still the same result. I am getting ready to purchase a Tech 2 just for this truck for diagnostic and programming purposes. But it will be a couple weeks out before the guy comes back from vaca to seal the deal so I can fully dig in. There is no hiccups otherwise, full throttle to hitting it. Just when I come up to a light and idle for a little bit. It does not feel like a misfire, it's more like split skip and it's 100% on. Any ideas? Quote Link to comment Share on other sites More sharing options...
FASTDIESEL Posted November 11, 2018 Report Share Posted November 11, 2018 Run a tank top tier gas in it. I've seen it correct drivability issues (no code issues). Won't hurt and doesn't cost very much. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.