evildcustoms Posted September 24, 2018 Report Share Posted September 24, 2018 Has anyone installed timbrens on their truck? Part # GMRCK15S is what i ordered and they won't fit between my axle and the bump-stop mount. I am thinking of disconnecting the shocks and to see if it will give me the clearance then lowering the truck down and reconnecting the shocks. Not sure if they just weren't made to work with the ss or if my springs are worn out. Quote Link to comment Share on other sites More sharing options...
someotherguy Posted September 25, 2018 Report Share Posted September 25, 2018 (edited) Sounds like wrong part for the application. Those are listed for a regular Silverado, not an SS. The SS is a couple inches lower than a regular Silverado. Timbren says there should be a 1/2" to 1-1/2" gap (unloaded) between the axle and their part. If I recall the SS drop is 2" over a regular Silvy so that's already exceeding the gap that Timbren wants to see. Richard Edited September 25, 2018 by someotherguy (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.