Vinci Trucker w/ 114lsa or LPE GT2-3 cam when running a mp112 Radix?

[broke1 0]

I know this forum is kind of dead but I also know Silverado SS guys know a thing or 2 about getting a heavy truck to lay down some ETs?

 

Truck is a heavy AWD Escalade EXT....nv149/built 4l65 w/ PTC built TB stall,3.73 gears.Engine setup is:

 

Gen 4 iron 6.2 (.065 over 6.0)

216/224 .551/.551 114+4 Howards cam(Vinci/Crane knock off)

Advanced induction 226cc ported 799s

Ls9 hesdgaskets w/ ARP Head bolts

11.3:1 compression w/ stock ls3 hyper pisons(I plan on running e85 and meth injection)

Long tube headers and Corsa Touring(I know I need to get a true dual exhaust)

ATI 4% is balancer

All other bolt ons and good stuff

And a MP112 w/ upgraded HE,upgraded 100mm idlers,HD tensioner,90mm J tube,etc.

 

The reason for the high compression is I never planned on any kind of power adder(I know) but I ran up on a deal on a polished mp112 kit I couldnt pass up so here I am.

 

Ive read a lot about the Lingenfelter GT2-3 cams(207/220 on a 118.5) holding the ET record when paired with a mp112 in a Silverado SS.

 

The current cam is very mild in the 6.2 and peaks around 5800rpm.

 

Will I really be giving up that much or anything not running the gt2-3?

 

Im thinking the gains/driveability between the 2 would be minimal and Id be better off spending the $$$ on a dual exhaust setup like Speed Engineering sells....

 

I know I will be very limited on boost/timing so the right cam will be even more important.

 

Thoughts?

[12secss e.mack 4]

I had both and the VINCI CAM gave me the most gain....I have a VINCI cam in my truck now with my TVS2300 running 10.6 in 1/4 mile....I would call VINCI tell him what you have and he will tell you what you need ,He will then cut you a custom cam at no extra cost .

Edited February 2, 2018 by 12secss e.mack

[broke1 0]

I already have the Vinci/Crane knockoff but its on a 114 lsa.....