cleansss20 Posted March 8, 2016 Report Share Posted March 8, 2016 Im getting belt slippage under wot pulls. I want to upgrade to the hd tensioner. I see where people say use gates 38131 and gates pulley that i cant recall the number. But the pulley looks round...do you use the stock pulley base bracket? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
cleansss20 Posted March 8, 2016 Author Report Share Posted March 8, 2016 Wanted to get this knocked out before i out my procharger back on. Also does it keep the same belt size as the stock pulley? Quote Link to comment Share on other sites More sharing options...
06 v-maxx Posted March 8, 2016 Report Share Posted March 8, 2016 36100 gates pulley remove the stock plastic on that comes on the 38131 tensioner Quote Link to comment Share on other sites More sharing options...
cleansss20 Posted March 9, 2016 Author Report Share Posted March 9, 2016 But does the pulley tensioner have the right mounting bracket or do i take the back off the old one? Quote Link to comment Share on other sites More sharing options...
Aldofashow Posted March 9, 2016 Report Share Posted March 9, 2016 I was looking at these still haven't pulled the trigger but it looked like a nice piece Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.