Jump to content
Sign in to follow this  
22runbull

Wheel hub bearings

Recommended Posts

you can get them pretty cheap online or even at a local autostore

Share this post


Link to post
Share on other sites

Anyone selling brand new one's for the front !!!!

 

Ordered mine from Amazon dirt cheap. Work great.

Share this post


Link to post
Share on other sites

I would get a quality part. Timken is the best I've used.

X2 yeah buy Timken if you insist on going aftermarket or go OE with AC Delco. It's one of those jobs while easy you don't want to do again in a year or two because you bought a cheap one.....

Share this post


Link to post
Share on other sites

I replaced both my fronts with Timkin's, Both sides use the same hub.

Timken
Wheel Bearing/Hub Assembly, Front
(50MM Bore Bearing)
SP500300
(rockauto has them for under $100 last I checked)

Share this post


Link to post
Share on other sites

 

I replaced both my fronts with Timkin's, Both sides use the same hub.

 

Timken
Wheel Bearing/Hub Assembly, Front
(50MM Bore Bearing)
SP500300
(rockauto has them for under $100 last I checked)

 

 

Is this the same part number for a 2006 ISS? I am going crazy trying to figure out which is the correct one...

Edited by Distracted

Share this post


Link to post
Share on other sites

 

Is this the same part number for a 2006 ISS? I am going crazy trying to figure out which is the correct one...

2006 was RWD only

 

TIMKEN SP500300 Front; 4WD - 4X4/AWD Applications Only

 

TIMKEN SP450301 Front; RWD

Share this post


Link to post
Share on other sites

2006 was RWD only

 

TIMKEN SP500300 Front; 4WD - 4X4/AWD Applications Only

 

TIMKEN SP450301 Front; RWD

Yeah but since the SS is still built on a 4x4 chassis, did it use the bearings for the 4x4/AWD application, or the RWD application which is really a different setup altogether?

 

Richard

Edited by someotherguy

Share this post


Link to post
Share on other sites

According to my interchange, there are 3 different hubs. 2WD, 4WD/AWD, and the B4V/B4U/B2E(torsion bar 2WD) trucks. The SP450301 is the regular 2wd one. All the spindles are the same, so I'm sure they would go right on there, but they are different(no idea what that difference would be).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...