Jkuehne04 Posted August 15, 2015 Report Share Posted August 15, 2015 (edited) Does anybody have info on a kb 2.2L side mount. Like 6 rip belt length, pn for idler pulley/s and belt tensioner. And if anyone has any helpful info on anything about it. I have the pump at my shop so it's not in the pic. These are the parts I have. Don't know if idler and tensioner are correct. Thank you for your time! Edited August 15, 2015 by Jkuehne04 (see edit history) Quote Link to comment Share on other sites More sharing options...
cadowns Posted August 15, 2015 Report Share Posted August 15, 2015 Send me a PM. We can assist you. The belt I use is a 4060919. CD Quote Link to comment Share on other sites More sharing options...
Stryker901 Posted August 3, 2016 Report Share Posted August 3, 2016 Don't mean to resurrect an old thread, hopefully you are still around. I just purchased my SS and it came equipped with a Kenne Bell Twin Screw Super on it. I'm very new to this type of performance mod so I wanted to get any information possible. I can get more information from the motor if needed, I just don't know where to start. Here is what I'm looking at on the engine. Also might add that I just received a custom IAT to replace the non-sensor version already on the truck. I just don't know where it plugs at, I'm assuming a custom gauge I need to install somewhere inside the cab. Quote Link to comment Share on other sites More sharing options...
204Denali Posted August 25, 2016 Report Share Posted August 25, 2016 Your belt is off a rib on the blower pulley. IAT sensor goes on the bottom of the inlet elbow to the intake. Quote Link to comment Share on other sites More sharing options...
cadowns Posted September 3, 2016 Report Share Posted September 3, 2016 Ha !! You bought my old truck. CD Quote Link to comment Share on other sites More sharing options...
Stryker901 Posted September 6, 2016 Report Share Posted September 6, 2016 Ha !! You bought my old truck. CD I'm very happy you let it go then! Your belt is off a rib on the blower pulley. IAT sensor goes on the bottom of the inlet elbow to the intake. Also, fixed the belt shortly after these pictures. These were my just got home from delivery images. I was able to locate the IAT sensor spot. Now I just need to decide where to plug it and see if I need a custom gauge for it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.