CraigW Posted August 13, 2004 Report Share Posted August 13, 2004 If you take the scoop and cut 2 relief cuts on the inside edge of the scoop about 1 and 1/2 inch long. After that heat the relief area up with a heat gun and bend that part outward about 3/4 inch. Let it cool and put it back on it will fit alot better and not torque the bumper vent like it did. Link to comment Share on other sites More sharing options...
SuperDave Posted August 13, 2004 Report Share Posted August 13, 2004 Other than mine making a slight bulge in the inner fenderwell, it fits fine. No torquing of the vent. I did notice that when I turn the wheels to the left lock the tire rubs a bit on the fenderwell. I agree with the value statement. For 140.00 it ought to fit right in every aspect! I would not buy another one knowing what I know now. Link to comment Share on other sites More sharing options...
CraigW Posted August 13, 2004 Author Report Share Posted August 13, 2004 Thats why it doesnt torque the vent. If you pull the tube and scope so there's tire clearance then it torques the vent. Link to comment Share on other sites More sharing options...
Black04SS Posted August 23, 2004 Report Share Posted August 23, 2004 Great job completing their engineering Do you have any debris / trash or water getting up to the filter? Have you driven very far at highway speeds in a good rain? Hows the power? TIA,WP Link to comment Share on other sites More sharing options...
CraigW Posted August 24, 2004 Author Report Share Posted August 24, 2004 On my way to Wichita for the SS rally I ran for about an hour in a down pour No problems with water. Only things in filter is bugs and dust. Link to comment Share on other sites More sharing options...
IdriveGTP Posted September 12, 2004 Report Share Posted September 12, 2004 Craig, Could you repost those pics please? Thanks! Link to comment Share on other sites More sharing options...
SSAlaska Posted September 15, 2004 Report Share Posted September 15, 2004 Craig, Could you repost those pics please? Thanks! <{POST_SNAPBACK}> Link to comment Share on other sites More sharing options...
CraigW Posted September 16, 2004 Author Report Share Posted September 16, 2004 The pictures are reposted above. Link to comment Share on other sites More sharing options...
mwarren Posted September 16, 2004 Report Share Posted September 16, 2004 Thanks CraigW, I will keep this in mind when installing mine...hopefully this weekend. Link to comment Share on other sites More sharing options...
IdriveGTP Posted September 16, 2004 Report Share Posted September 16, 2004 Thanks, I am going to pull my in this weekend and modify it! Link to comment Share on other sites More sharing options...
mwarren Posted September 17, 2004 Report Share Posted September 17, 2004 Mine was sitting at the door step today when I got home. Can't wait to dig into the installation. Link to comment Share on other sites More sharing options...
CraigW Posted September 17, 2004 Author Report Share Posted September 17, 2004 Any questions do hesitate to ask. Have fun with it. Link to comment Share on other sites More sharing options...
mwarren Posted September 20, 2004 Report Share Posted September 20, 2004 CraigW thanks for the tips on the install. I did not make any relief cuts on the scoop. Seems to stay on without it, but did use some zip ties to hold the scoop tube in off the wheel well plastic. Here are some pics of the install. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.