BLNAWAY Posted February 7, 2013 Report Share Posted February 7, 2013 P/N 24221349 - GM Updated Valve Body Spacer Plate and Gasket set. Reason behind replacing this is the factory separator plates had an issue with the checkballs deeply wearing into the plate and sometimes all the way through. My factory transmission had shy over 30k miles on it, and one of the checkballs by the 1-2 accumulator housing had worn a pretty good groove in the plate already. Dont remember the cost, but it wasnt bad. I called my gm dealer and searched the web and i cannot find this part. Any ideas? this should still be correct this is the pn# i gave my dealer back in nov(it might have supercided by now who knos). when i did mine and they got it no prob Quote Link to comment Share on other sites More sharing options...
Mrrat1SS Posted February 7, 2014 Report Share Posted February 7, 2014 very helpful write up............thanks!!! Quote Link to comment Share on other sites More sharing options...
Stoshball Posted April 6, 2014 Report Share Posted April 6, 2014 Just curious on roughly how long it took you guys to do this start to finish time wise? Quote Link to comment Share on other sites More sharing options...
2bfast Posted April 7, 2014 Author Report Share Posted April 7, 2014 Depending on skill level, 2-3 hours. Some may want to take longer just to take your time. Doesnt hurt to double or triple check everything Quote Link to comment Share on other sites More sharing options...
dcwelding Posted March 1, 2015 Report Share Posted March 1, 2015 I cannot find the #27. I found the 27-2s. Same? I try to follow to the directions to a T. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.