Jump to content
Time2Kill

Tru-Cool Max 47391 Install Brackets 4739 Trucool

Recommended Posts

These brackets are to bolt a Tru-Cool Max 4739 Transmission cooler to a 1500 Silverado. It uses all the factory bolt locations so no drilling is required. These brackets are made out of 1/8" Aluminum. The driver side transmission line did not need any modification other than being pulled over a couple of inches. The passenger transmission line has to be cut and spun about 180*. This is done by cutting the line, spinning it 180* and using a standard compression fitting to put it back together.

 

My transmission temps are about 160* with a Yank TT3000 (stalling at 3600rpm behind a 408) in 70*~80* weather. I've been running this exact setup for over a year now with no problems.

 

These are ready to ship.

 

$60 shipped for just the brackets.

 

$75 shipped for the brackets and all necessary hardware to install the brackets. Includes quick disconnect fittings for the cooler, compression fitting, bolts, and nuts. You get everything as pictured except for the temp sensor. That is just to show that there is a spot for the temp sensor to snap into.

post-6258-127488627432_thumb.jpg

post-6258-127488628003_thumb.jpg

post-6258-12748862855_thumb.jpg

post-6258-12748862925_thumb.jpg

Edited by Time2Kill
  • Upvote 1

Share this post


Link to post
Share on other sites

I have a set and love them. Work like a charm. Only problem is that I now have to modify my hood protector latch. Some cutting will be involved.

Share this post


Link to post
Share on other sites

I have a set and love them. Work like a charm. Only problem is that I now have to modify my hood protector latch. Some cutting will be involved.

 

Is the install somehow interfering with your latch? I have tons of clearance around my latches. I've sold quite a few of these as well and nobody else has had a single complaint.

Edited by Time2Kill

Share this post


Link to post
Share on other sites

I have more of these brackets available for anyone that is interested!

Share this post


Link to post
Share on other sites

Got my brackets and my Tranny cooler. Well be installed next week hopefully.

Share this post


Link to post
Share on other sites

Got my brackets and my Tranny cooler. Well be installed next week hopefully.

 

:driving: Post some pics up of the install!

 

 

Still have more of these brackets ready to ship!

Share this post


Link to post
Share on other sites

I had my cooler installed with in 30 mins with these brackets. The fit is like OEM!!! I had my cooler & brackets powder coated black A great investment for an added bit of reliability that the 4L65E could use.

Share this post


Link to post
Share on other sites

I’ve had mine mounted using these wonderful brackets for hell and ever, so there is nothing new there, but one thing I thought I would add due to seeing people ask the question from time to time, is how easy it is to mount the standard sized Magnacharger heat exchanger while using these brackets with the TruCool. I know a lot of people get concerned over whether or not they will have the room to make everything work together and it’s understandable, but to put peoples mind to rest, everything will work together just fine. The only modifications required at all will be to the upper bracket that holds the heat exchanger to clear the larger size of the transmission cooler. A few well selected bends and even the bracket supplied by Magnacharger works just fine. The bottom shock absorbing mounts for the heat exchanger fit just as normal.

 

 

So much better than plumbers straps, rubber hoses and clamps. Anyone on the fence and interested in installing the TruCool should really look into picking up this installation kit.

Share this post


Link to post
Share on other sites

Installed my brackets and cooler last week. Looks and works great as I noticed about a 40-60 degree drop in temp on the gauge.

Share this post


Link to post
Share on other sites

Mine was just delivered today, came with some brackets, hardware, hose and clamps and some fittings. Let's see how the install goes....

Share this post


Link to post
Share on other sites

I'll take a kit with fittings, I have a 06 silverado ext cab with the stock cooler and I have a 47391 I need to install.

 

PM me for paypal :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×