flyin99 Posted January 24, 2010 Report Share Posted January 24, 2010 After searching many boards and topics, I keep getting different numbers from different people. Just to confirm, I went to a dealer site and they said they had no idea what it took to do a conversion, but sent me a pic of the parts I would need. I surely wouldn't need every little item on here........right? My truck is just an 06 Silverado 1500, but I want the look of a 03-04-05 SS....going to get a scoop hood, but other then that, I was looking into GM stuff, but dealers are so picky.........even had a couple tell me the fenders were different..........I doubt that, but I've been wrong before. Does anyone have an updated parts list of GM numbers, that it take to do this conversion? Thanks!! Brad Quote Link to comment Share on other sites More sharing options...
12'SROCK Posted January 24, 2010 Report Share Posted January 24, 2010 15197889 - License Plate Bracket 15178219 - Crossbar and Grille 12335659 - Front Bumper 12335765 - Front Bumper Grille 12335766 - Passenger Air Duct 12335767 - Driver Air Duct 10360423 - Driver Front Door Molding 10360428 - Passenger Front Door Molding 10360434 - Driver Rear Door Molding 10360441 - Passenger Rear Door Molding 15178226 - Passenger Fender Molding (Behind Front Wheel) 15178227 - Driver Fender Molding (Behind Front Wheel) 88980000 - Passenger Rocker Panel (Under Door Cladding) 88980186 - Driver Rocker Panel (Under Door Cladding) 15178234 - Passenger Rear Fender Molding (Before Rear Wheel) 15178235 - Driver Rear Fender Molding (After Rear Door) 15197858 - Passenger Rear Panel (After Rear Door) 15197857 - Driver Rear Panel (Before Rear Wheel) 88944467 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 88980189 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 15178282 - Lower Tailgate Molding 15197873 - Tailgate Spoiler 15178667 - Decal on Tailgate 15178666 - SS Letters Quote Link to comment Share on other sites More sharing options...
flyin99 Posted January 24, 2010 Author Report Share Posted January 24, 2010 15197889 - License Plate Bracket15178219 - Crossbar and Grille 12335659 - Front Bumper 12335765 - Front Bumper Grille 12335766 - Passenger Air Duct 12335767 - Driver Air Duct 10360423 - Driver Front Door Molding 10360428 - Passenger Front Door Molding 10360434 - Driver Rear Door Molding 10360441 - Passenger Rear Door Molding 15178226 - Passenger Fender Molding (Behind Front Wheel) 15178227 - Driver Fender Molding (Behind Front Wheel) 88980000 - Passenger Rocker Panel (Under Door Cladding) 88980186 - Driver Rocker Panel (Under Door Cladding) 15178234 - Passenger Rear Fender Molding (Before Rear Wheel) 15178235 - Driver Rear Fender Molding (After Rear Door) 15197858 - Passenger Rear Panel (After Rear Door) 15197857 - Driver Rear Panel (Before Rear Wheel) 88944467 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 88980189 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 15178282 - Lower Tailgate Molding 15197873 - Tailgate Spoiler 15178667 - Decal on Tailgate 15178666 - SS Letters Thanks for the list..........As far as brackets go, which ones are needed to do it correctly, on the bumper/cover? Quote Link to comment Share on other sites More sharing options...
mcmahan Posted January 24, 2010 Report Share Posted January 24, 2010 15197889 - License Plate Bracket15178219 - Crossbar and Grille 12335659 - Front Bumper 12335765 - Front Bumper Grille 12335766 - Passenger Air Duct 12335767 - Driver Air Duct 10360423 - Driver Front Door Molding 10360428 - Passenger Front Door Molding 10360434 - Driver Rear Door Molding 10360441 - Passenger Rear Door Molding 15178226 - Passenger Fender Molding (Behind Front Wheel) 15178227 - Driver Fender Molding (Behind Front Wheel) 88980000 - Passenger Rocker Panel (Under Door Cladding) 88980186 - Driver Rocker Panel (Under Door Cladding) 15178234 - Passenger Rear Fender Molding (Before Rear Wheel) 15178235 - Driver Rear Fender Molding (After Rear Door) 15197858 - Passenger Rear Panel (After Rear Door) 15197857 - Driver Rear Panel (Before Rear Wheel) 88944467 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 88980189 - (Not sure which side) Silverado SS Panel (Behind Rear Wheel) 15178282 - Lower Tailgate Molding 15197873 - Tailgate Spoiler 15178667 - Decal on Tailgate 15178666 - SS Letters Wow Art thats one hell of a parts list great info you posted Quote Link to comment Share on other sites More sharing options...
Krambo Posted January 24, 2010 Report Share Posted January 24, 2010 *moving to correct section* Quote Link to comment Share on other sites More sharing options...
04fullsize Posted January 24, 2010 Report Share Posted January 24, 2010 Ok well I did this on my last truck and the only parts i purchased were the cover, and the two brake ducts. I made the brackets myself (trust me this is not difficult). All said and done I spent around $600 including paint. All you need to do it take off the top pad and lower valence from your current bumper and the pad will fit right over, get some double sided tape and fab up some brackets and you're good to go. If you really want to buy all the factory hardware go ahead (nothing wrong with wanting to make it perfect) just giving you another option. Here's how it looked on my truck when I was done: Quote Link to comment Share on other sites More sharing options...
mcmahan Posted January 24, 2010 Report Share Posted January 24, 2010 Ok well I did this on my last truck and the only parts i purchased were the cover, and the two brake ducts. I made the brackets myself (trust me this is not difficult). All said and done I spent around $600 including paint. All you need to do it take off the top pad and lower valence from your current bumper and the pad will fit right over, get some double sided tape and fab up some brackets and you're good to go. If you really want to buy all the factory hardware go ahead (nothing wrong with wanting to make it perfect) just giving you another option. Here's how it looked on my truck when I was done: I love your old truck where ya been havent heard from you in a while Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted January 24, 2010 Report Share Posted January 24, 2010 +1 on making your own brackets. The one bracket is $100 a side!!! Quote Link to comment Share on other sites More sharing options...
04fullsize Posted January 25, 2010 Report Share Posted January 25, 2010 I love your old truck where ya been havent heard from you in a while School and more school man. Taking a full load and working eats all my free time. How's everything with you going? Quote Link to comment Share on other sites More sharing options...
flyin99 Posted January 25, 2010 Author Report Share Posted January 25, 2010 Ok well I did this on my last truck and the only parts i purchased were the cover, and the two brake ducts. I made the brackets myself (trust me this is not difficult). All said and done I spent around $600 including paint. All you need to do it take off the top pad and lower valence from your current bumper and the pad will fit right over, get some double sided tape and fab up some brackets and you're good to go. If you really want to buy all the factory hardware go ahead (nothing wrong with wanting to make it perfect) just giving you another option. Here's how it looked on my truck when I was done: Thanks for the help!!! You're truck is bad ass, on 7 or 8 different levels!!! lol LOVE THAT LOOK!!!!! I can fab up some brackets........just wasn't sure if I had to have the GM's or if the cover would fall off........thanks again!! Quote Link to comment Share on other sites More sharing options...
04fullsize Posted January 25, 2010 Report Share Posted January 25, 2010 Thanks for the help!!! You're truck is bad ass, on 7 or 8 different levels!!! lol LOVE THAT LOOK!!!!! I can fab up some brackets........just wasn't sure if I had to have the GM's or if the cover would fall off........thanks again!! No it wont fall off lol, the OEM cover should come with some plastic "push in" style rivets that secure the cover to the actual metal bumper behind. The brackets are mostly for rigidity purposes so when you're driving down the freeway its not flapping all over the place. Good luck and keep us updated. Check gmpartdirect.com, thats where I bought mine back in the day. Edit: just checked, they have it for just under $300 for the cover and $110 for each duct. 12335659 - Front Bumper 12335766 - Passenger Air Duct 12335767 - Driver Air Duct Quote Link to comment Share on other sites More sharing options...
BlueAKSSS Posted January 25, 2010 Report Share Posted January 25, 2010 http://cgi.ebay.com/ebaymotors/Brake-Duct-...=item1e586388cd There's both the front brake ducts for a lot cheaper than the dealer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.