Time2Kill Posted June 17, 2020 Author Report Share Posted June 17, 2020 On 6/12/2020 at 1:47 AM, Awddenali said: I would like to see if you have any input shafts available? I still make them. Takes 1-2 weeks. Quote Link to comment Share on other sites More sharing options...
Twogees Posted June 19, 2020 Report Share Posted June 19, 2020 (edited) Hey, I am trying to find out how to order an adapter from you-Ben pm sent. Edited June 19, 2020 by Twogees (see edit history) Quote Link to comment Share on other sites More sharing options...
Chandler Cummings Posted July 4, 2020 Report Share Posted July 4, 2020 I was wondering if you make these for a 2010 GMC Sierra 6.2 AWD t-case? I’m looking to go 4l80e. Quote Link to comment Share on other sites More sharing options...
DenaliSS04 Posted September 12, 2020 Report Share Posted September 12, 2020 Hello I’m just like everybody else I am looking for the adapter from me 6L90 to a NP 149. Let me know what I need to do this is the only part holding up my Build at this point. Thanks ahead of time, Quote Link to comment Share on other sites More sharing options...
Tim Posted October 23, 2020 Report Share Posted October 23, 2020 R you still making these input shafts Quote Link to comment Share on other sites More sharing options...
Tim Posted November 3, 2020 Report Share Posted November 3, 2020 Time2kill do u still do these input shafts and also is there anything to make gm120 transfer case a 32 spline thanks Quote Link to comment Share on other sites More sharing options...
Detroit Amerson Posted December 18, 2020 Report Share Posted December 18, 2020 Is this the one I need for a 2005 Yukon Denali to convert to a 4L80 4wd trans using stock awd case? Quote Link to comment Share on other sites More sharing options...
Time2Kill Posted December 30, 2020 Author Report Share Posted December 30, 2020 On 12/18/2020 at 8:02 AM, Detroit Amerson said: Is this the one I need for a 2005 Yukon Denali to convert to a 4L80 4wd trans using stock awd case? The 2005 Yukon Denali came with a Borg Warner case. It's a terrible case and does not handle big power. It acts like an open diff and will send all the power to the front wheels when you launch and you will have zero traction. You can swap a NVG149 right in with my gear and get rid of that junk. The NVG149 splits the power like a locker, 38% to the front and 62% to the rear. Quote Link to comment Share on other sites More sharing options...
Time2Kill Posted December 30, 2020 Author Report Share Posted December 30, 2020 On 9/12/2020 at 1:47 AM, DenaliSS04 said: Hello I’m just like everybody else I am looking for the adapter from me 6L90 to a NP 149. Let me know what I need to do this is the only part holding up my Build at this point. Thanks ahead of time, If there were enough people that could commit, I could probably get it made, but I haven't seen enough interest yet. Quote Link to comment Share on other sites More sharing options...
Time2Kill Posted December 30, 2020 Author Report Share Posted December 30, 2020 On 11/3/2020 at 11:38 AM, Tim said: Time2kill do u still do these input shafts and also is there anything to make gm120 transfer case a 32 spline thanks I still make the gears for the NVG149 Quote Link to comment Share on other sites More sharing options...
[email protected] Posted January 11, 2021 Report Share Posted January 11, 2021 @Time2kill can you contact me about this I need one so I can install a 80 in my truck. Thanks, Shannon [email protected] Quote Link to comment Share on other sites More sharing options...
turbo08blazerss Posted February 9, 2021 Report Share Posted February 9, 2021 I would like one of these plz Email me @ [email protected] Thanks Quote Link to comment Share on other sites More sharing options...
Rexamillion Posted February 17, 2021 Report Share Posted February 17, 2021 Hey brother man. I stumbled across this thread and am interested in 80 swapping my 04 Yukon Denali. Could you shoot me an email or a text when you have a few minutes? Thanks Rex 910-527-5274 Quote Link to comment Share on other sites More sharing options...
Tim Posted March 3, 2021 Report Share Posted March 3, 2021 I am ready and need input shaft found a nv149 Quote Link to comment Share on other sites More sharing options...
jason@ecautoandironfab Posted March 5, 2021 Report Share Posted March 5, 2021 I need to get one of these 149-4l80 input shafts ordered up. Please contact me at [email protected] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.