Jump to content

SSS.com FEATURED TRUCK CONTEST - May/June


Holty

Scroll down and read about our contest nominees then vote for your favorite  

163 members have voted

  1. 1. VOTE NOW for SilveradoSS.com's first ever featured truck

    • 04CHASE
      74
    • AUTOGUY
      16
    • kelleyperformance
      59


Recommended Posts

04Chase

 

DSC01798.jpg

 

As I grew out of my old Tahoe I was always intrigued by the Silverado SS truck. I joined SilveradoSS.com to help me find a new truck and to see what the aftermarket offered for it. Learning the SS were awd with power made me want it even more and after seeing the cool things that members on SSS.com were doing i had to find one. Finally one day (november 30th 2004) i finally found a SS in black. It was located about 100 miles away and it was pre-owned with 8k miles on it. It was formerly 2005SSr6speed's truck. He had put a good mark cowl hood and a custom roll pan on it. SO after some bargaining i finally bought it for 29k out the door.

 

DSC01867.jpg

interior.jpg

 

 

 

I then found performance trucks.net after the performance mod started kicking in. I started off with all of the basic bolt on mods such as, headers, intake, tune and exhaust. I also had to do some visual mods to the SS because i wanted something that looked as good as it was fast. So i went with some forged 22' inch wheels, Baer alumasport brakes, and a drop kit. This was still not enough, i then wanted more power. I found a Vortech supercharger kit that was being sold that included a lot of extras. So i had no choice but to buy it. It also included a cam and i put that in before i installed the blower. That got me running low 14's on 22-inch wheels.

 

DSC01806.jpg

DSC01802.jpg

 

I finally installed the blower about a month later. This got me running high 12's on 22's and when i felt the power the joy it brought me was indescribable. After a few passes the tranny finally didn’t want to take anymore. I took my truck to the Toy Shop in Pomona Ca. They did some awesome work and my trans has held up ever since. I then set my new goal to an 11 second e.t. So i found some lightweight 18-inch wheels and smaller tires. With these i lost almost 1/2 second the 1/4 mile. This gave me and 12.003 e.t and that’s all i could ever get out it.

 

DSC01644.jpg

 

I then found a deal on an upgraded supercharger that would bolt in place of the curretn one i had( S-trim to T-trim) and this blower was not only more efficient and allowed for more boost but it also made the cool blower sound.I took it to the track with this blower but i discovered that it was leaking oil and the bearigns were going south. I deceided to run it for the day just to see what it could do. I ran drag radials this time around because traction was starting to be an issue even with awd. The best i could manage was a 12.1 with a horrible head wind and belt slippage. So i deceided to start swapping the 22's back on putting the bed cover back on and getting ready to leave. I heard the last run call so i wanted to see what she would run with the extra weight and bigger wheels. I lined it up and launched at 2500 rpms with hardly any spin. the truck felt like it pulled hard all the way to the finish line. by the time i had started to turn around after the traps i heard my cell phone ring. 11.9 are all i remember hearing . I had finally reached my goal even with the 22's.

The mods the truck currently has

 

 

Performance:

Vortech T trim (Race) supercharger 3.1 pulley

Maxflow blow off valve

Nitrous Express efi wet kit (50-150 shot)

860 nitrous bottle heater (built into mount)

Nitro daves nitrous switch panel

3-gallon intercooler icebox

big 3(upgraded power, ground and alt wires(I/0 gauge)

relocated optima yellow top battery

Mototron 60lb injectors

Fluiddyne heat exchanger w/e-fans and Nitrous purge

Toy Shop Built 4l65e

TCS 2800 stall

Tru-cool 40,000gvw trans cooler

MSD plug wires

Ngk tr6 cold range plugs (gapped to .035)

Custom fabbed cold air intake/fiberglass air box

Magnaflow dual in/out 3" muffler w b built in X pipe

Magnaflow metallic catalytic converter(now gutted)

Pacesetter Long Tube headers

Doug’s Electric guillotine Cutouts

2005 Gm Electric fans

160 Thermostat

TA Performance 10 bolt girdle

Optima yellow top

200-amp alternator

Alumasport 14 inch Baer brakes

Stainless Steel braided brake lines

Autometer phantom 2 boost and fuel press gauges

Pinned crank

Magnavolt boost-a-pump

255 lph walbro fuel pump

Ported throttle body

Throttle body Coolant bypass

Tuned using HP tuners pro

lm1 wideband

Centerline 18's(track only)

305/45/18 Nitto Drag radials(track only)

 

 

Appearance Modifications

True Fire Paint job (Starbucks Customs)

Gaylord speedsturr bed cover

BSER custom roll pan w/hitch

McGaughy 2-3.5 deluxe kit

Beltech bump stops

Beltech 6*shims

Beltech nitro active shocks(front/rear)

Precision billet grill

Custom Chromed bumper ducts

Goodmark cowl hood

Shopman1 bowtie

Chrome SS Emblems

Shaved tailgate

Motoforge 22's(22x10) powder coated black

Toyo proxes 305/40/22

5000K Philips h.i.d. kit

Hotchkis anti-sway bars (for lowered truck)

Aeroforce interceptor gauge

Valentine1 Radar detector

Smoked tails

Smoked led third

 

DSC01816.jpg

DSC01863.jpg

 

I now have set my new 2007 goal to be the first 10-second SS silverado. So i sent the blower to get rebuilt and unfortunately i was forced into buying a brand new unit. I also deceided to buy a nx wet nitrous kit to get the truck going faster and help cool the intake charge temperatures with a small 50 shot to start off with. A few days before track day we were tuning the last few things and the worst thing happened . The bone stock Lq9 motor deceided it had enough. After looking at the logs we figured it was partly caused by going lean. Realizing the fuel system is also a weak link going down to 52 psi from 60 at wot was something that needed to be addressed. The truck is getting a newly designed return fuel system and a new 370 cubic inch motor.

 

 

DSC00281.jpg

 

370 consist of

 

6.0l iron block .03 over

diamond forged 15cc dished pistons

eagle 3.622 forged crank

probe i beam light weight forged 6.125 rods

patriot stage 3 heads

yella terra 1.7 rockers

ARP main studs, rod bolts ,head studs and balancer bolt

comp push rods

comp billet timing chain

futral cam 216/222 114+3 547/589

 

 

CR 9.25-1

 

fuel system/air intake

 

magnafuel boost ref FPR

Magnafuel Filter

dual walbro 355's

return swap

-8 ss feed line, -6 return

Edelbrock vic jr polished intake

edelbrock fuel rails

intake elbows custom 90 elbow

90mm tb/adaptor harness to allow full range of 90mm tb

ls2 90mm tb

custom nitous spray bar inside intake.

Link to comment
Share on other sites

AUTOGUY

 

autoguy1%20(1).JPG

 

Truck was purchased 12/12/2003 Used with 3,100 miles on it from a friend that owns a Dodge Dealership. It belonged to a friend of one of the sales Managers, and it was traded for a 3/4 ton Dodge Ram due to a job change of the previous owner.

 

I drove it daily for the first couple months, and then decided to keep it clean and never drive it in any bad weather or even rain, so not it is almost 3 1/2 years later, and I only put 8,000 miles on it since purchase.

 

Since I own an Aftermarket Accessory Business, there was no delay in getting working on this truck. Here is what has been done.

 

autoguy1%20(2).JPG

autoguy1%20(3).JPG

autoguy1%20(4).JPG

 

 

 

Exterior Mods:

 

Good Mark Steel Cowl Induction Hood

 

Ridergraphix.com Retro Hockey Stick Stripes

 

20% Tint on Front Windows

 

Brushed Billet Aluminum Grill Bowtie

 

Spiderlight Read LED Taillight Bulbs

 

Line of Fire under tailgate LED Strip Light

 

Torza Hard Had Premier Cloth Covered 3 Panel Folding Hard Tonneau Cover

 

Bedrug

 

EGR In Channel Window Visors

 

Relocated Antenna with GM Blank Cowl Panel

 

Sylvania Silverstar Headlight Bulbs

 

Custom Chin Spoiler

 

Brushed Aluminum Fuel Door

 

autoguy1%20(5).JPG

autoguy1%20(6).JPG

autoguy1%20(7).JPG

 

 

 

Interior Mods:

 

Lloyds Mats with Silverado SS Embroidered

 

Leather Covered Center Armrest

 

Autowoods Italian Sculptured Steering Wheel with Carbon Fiber Inserts

 

GM Carbon Fiber Main Dash Gauge Surround

 

GM Carbon Fiber Lower Console

 

JP Customs Leather/Carbon Fiber Passenger side Grab Handle

 

Nu Image Billet Aluminum Gage Bezel

 

Sirius Sportster Receiver

 

autoguy1%20(8).JPG

autoguy1%20(9).JPG

autoguy1%20(10).JPG

 

 

 

Performance Mods:

 

Volant New Style Cold Air Intake

 

Volant Functional Ram Air Intake Tube Connected to Bumper Vent

 

PCM for Less Tuned PCM

 

Custom Side Exit Magnaflow Exhaust System with Dual 4" Round Mufflers and X-pipe

 

 

 

Suspension Mods:

 

22 x 9" Centerline "Rapid" Forged Polished Wheels

 

285/45/22 Toy Proxes ST Tires

 

McGaughy's Drop Spindles and Rear Shackles/Relocators

 

Bell Tech Nitro Active Gas Shocks

 

Hotchkis Front and Rear Swaybars

 

Baer Eradispeed Plus2 Cross Drilled 14" a Piece Front Rotors

 

Baer Eradispeed Rear Rotors

 

Hawk Performance Brake Pads

 

Earl's Stainless Steel brake Lines

 

ATE Super Blue Racing Brake Fluid

Link to comment
Share on other sites

kelleyperformance

 

kelleyperformance%20(1).jpg

 

I received my SSS in June 2006, brand new. At first it was just going to be a dealer demo, as all my previous vehicles were. I only had a few mods in mind, all very simple. They needed to be simple in order to sell the vehicle at the end of its 4,000 mile demo service.

 

It began small, with a CAI and a BBK 80mm TB. I had already tuned it, of course, and was constantly messing with it. I made 293 whp. After about a month, I had lowered it 1"/2", and put some 22" Eagle 026 wheels and tires on it. I soon became bored with the power, and bought a radix blower. Not even a month after the blower was installed, I killed the slush box. I then made my own trans similar to the FLT 5, using FLT for strength. From there the cycle continued, starting with a cat-back and not ending until the engine block was the only thing factory in the drive train. Of course, after this much I realized I wasn’t going to sell this one. After enduring the extremely noisy setup for too long, I decided to end the piston slap for good. The engine was rebuilt with GM Performance Parts, including dished LQ4 pistons with valve reliefs. Today the truck puts down over 502 whp and 517 wtq, and I still have plans to add more power.

 

kelleyperformance%20(2).jpg

kelleyperformance%20(3).jpg

kelleyperformance%20(4).jpg

 

Mods are as follows:

Performance/Suspension:

502whp/517wtq

 

Magnasun Intercooled Eaton MP112 Supercharger

SFPHQ 2.85” Supercharger Pulley (Performance)

SFPHQ 3.20” Supercharger Pulley (Towing)

K&N 77 Series Cold Air Induction

NGK TR6 Spark Plugs (.035”)

Belltech 3” Drop Leaf Springs

Belltech 2” Drop Spindles

Belltech Nitro-Active Shocks

GroundForce Adjustable Drop Torsion Keys

HPTuners Custom Dyno Tune

Custom Dual 21/2” Magnaflow Exhuast (Dual Split Side Exit)

Dynatech 13/4” Long Tube Headers

GMPP 6.098” Connecting Rods

Lingenfelter Connecting Rod Bolts

GM LQ4 Teflon-Coated Pistons

GMPP LS7 Lifters

Lingenfelter Ported/High Pressure Oil Pump

Yank TT2600 Torque Converter

GM Performance LS2 CNC 250cc Cylinder Heads

Lingenfelter GT2-3 Camshaft

MSD 58lb Fuel Injectors

Mr. Gasket 160o Thermostat

Walbro 255lph In-Tank Fuel Pump

Magnaflow High-flow Catalytic Converters

BBK 80mm Throttle Body

Baer Alumisport Brake Kit (Front)

Baer Disc Conversion Kit, Alumisport (Rear)

Transgo HD-2 Shift Kit

B&M Transmission SuperCooler

Sonnax “Superhold” Servos, Pin, Springs

Sonnax Kevlar 2-4 Clutch Band

FLT “Beast” Sunshell Kit

FLT Racing Forward/Reverse Clutch Packs

FLT Racing 3-4 Clutches

Transgo Zinc-Plated Valve Body Spacer Plate

FLT Cyro-Treated Sleeved Input Drum

 

kelleyperformance%20(5).jpg

kelleyperformance%20(6).jpg

kelleyperformance%20(7).jpg

 

Exterior/Interior:

 

20% Windshield Tint

5% Window Tint

Phillips 6000k HID Lighting (9006)

Luminics Titanium 125 Watt Bulbs (9005)

Silverstar “Stealth” Bulbs

Trenz Polished GM Bowtie

22x9.5 Eagle 026 Chrome Wheels

305/40/22 Toyo Proxies

NuImage Stainless Face Gauges

AutoMeter Ultralite Boost Gauge

AutoMeter Ultralite Air to Fuel Gauge

US Speedo Blue/Stainless Gauge Needles

SnugTop Fiberglass Tonneau Cover

Recon “Smoked” LED Third Taillight

Carriage Works 5-Piece Billet Grill

Custom Antenna Delete

Custom Shaved Tailgate

Custom “Supercharged” Badging

 

kelleyperformance%20(8).jpg

kelleyperformance%20(9).jpg

 

Sound/Electrical: 1300 Watts RMS

 

Eclipse 6600 DVD/Navigation 6.5” Head Unit

Eclipse Rear View Camera

GM 165 Amp Alternator

Dual Optima Yellow-Top Batteries

“Big 3” Wiring Upgrade

Eclipse Sirius Satellite Radio

Custom iPod Interface (With Video Input)

Kenwood eXcelon 1000 Watt Monoblock Amplifier

2x Infinity 12” Kappa Perfect 1600 Watt Subwoofers

JL Audio A4300 4 Channel Amplifier (300/4)

JL Audio ZR-650 CSi Component Speakers

Polk/MOMO 4x6 Component Speakers

2 Gauge Monster Power Wire

10 Gauge Rockford Fosgate Speaker Wire

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...