Lee Posted August 5, 2003 Report Share Posted August 5, 2003 I've hit that damn heated seat button by accident once too often. Rachel also hit her passenger side button by accident this last weekend, too. Does anyone know how to disconnect those on/off buttons? Is there something as easy as a fuse or wires that I can disable? Thanks Quote Link to comment Share on other sites More sharing options...
blackhawk Posted August 5, 2003 Report Share Posted August 5, 2003 I have no idea Lee, but mcwarren can probably assist in this matter. Quote Link to comment Share on other sites More sharing options...
SSilverado60 Posted August 5, 2003 Report Share Posted August 5, 2003 just learning not to hit the button sounds like a better idea to me Quote Link to comment Share on other sites More sharing options...
mwalls54 Posted August 6, 2003 Report Share Posted August 6, 2003 look in your fuze box under the hood. i think thats where its at. at least it was on my old truck. Quote Link to comment Share on other sites More sharing options...
SinisterSS Posted August 6, 2003 Report Share Posted August 6, 2003 Pulling the fuse sounds like a good idea to me or you could unplug the connector under the seat. Quote Link to comment Share on other sites More sharing options...
hatrack Posted August 6, 2003 Report Share Posted August 6, 2003 Lee, I will see if a co-worker of mine can look it up tomorrow on the GM service site. He has some kind of logon that gets all the spec sheets and stuff. Quote Link to comment Share on other sites More sharing options...
MN C5 Posted August 6, 2003 Report Share Posted August 6, 2003 I've hit that damn heated seat button by accident once too often. Rachel also hit her passenger side button by accident this last weekend, too. Does anyone know how to disconnect those on/off buttons? Is there something as easy as a fuse or wires that I can disable? Thanks Your lucky to live somewhere warm enough to consider doing that Quote Link to comment Share on other sites More sharing options...
ChevelleBoy Posted August 6, 2003 Report Share Posted August 6, 2003 Hey Lee, I've done that several times myself, glad I'm not the only one. Quote Link to comment Share on other sites More sharing options...
Lee Posted August 6, 2003 Author Report Share Posted August 6, 2003 (edited) I will see if a co-worker of mine can look it up tomorrow on the GM service site. Thanks, Ken. Your lucky to live somewhere warm enough to consider doing that Yeah, MN. Phoenix does have a few advantages over other places I've lived like Phila, Detroit etc. Our 72 degree "winters" rank right at the top of that list. Pulling the fuse sounds like a good idea to me or you could unplug the connector under the seat. Thanks SInister and Matt. Disconnecting the wires under the seat is a great idea Sinister. I'll take a look this morning. just learning not to hit the button sounds like a better idea to me Not to me. That's why I asked the question. Thanks for the suggestion that I have better "hand management," though. Very helpful. Edited August 6, 2003 by Lee (see edit history) Quote Link to comment Share on other sites More sharing options...
shopman1 Posted August 6, 2003 Report Share Posted August 6, 2003 Lee - Worst case if the under the seat or fuse disconnect is a problem, you could take the door panel off and disconnect the switch for the heated seats. Just a thought. Quote Link to comment Share on other sites More sharing options...
GnatGoSplat Posted August 6, 2003 Report Share Posted August 6, 2003 C325 is the connector for the driver's seat heaters. It's located under the seat near the middle, in between the cluster of motors. You can try unplugging it. Here are the pinouts in case you think you've found it: A - BRN B - BLK/RED C - YEL D - BLK E - BLK/RED F - BLK I don't know if anything else is on that connector or not. You can pull the 30amp SEAT circuit breaker, but you also disable your power and memory seat features. You can also disconnect the heated seat switch from the Driver Door Module which will also disable your memory seats, but not the power seats. Quote Link to comment Share on other sites More sharing options...
hatrack Posted August 6, 2003 Report Share Posted August 6, 2003 Lee, This connector is suppose to be under the drivers/ passenger seat. There is a little graphic showing the connector but I didn't have a way to upload. As you look into the connector with the round side down pin A is on the right. Hope this help without having to disable the power seats or memory. There is also a connector in the door that could be de-pinned to unhook the heaters and leave the other stuff working. Heated Seat Element - Driver Cushion Connector Part Information 12064778 2-Way M Metri-Pack 150 Series (LT GRN) Pin A Wire Color BRN Circuit No. 2077 Function Heated Seat Cushion Element Supply Voltage Pin B Wire Color BLK Circuit No. 2078 Function Heated Seat Cushion Element Control Quote Link to comment Share on other sites More sharing options...
GnatGoSplat Posted August 6, 2003 Report Share Posted August 6, 2003 Disconnecting the 2-pin connector won't disable the seatback heating elements, just the cushion element. Quote Link to comment Share on other sites More sharing options...
dcairns Posted August 6, 2003 Report Share Posted August 6, 2003 There is a little graphic showing the connector but I didn't have a way to upload. If you send the graphic to me via email, I would be glad to host it. Quote Link to comment Share on other sites More sharing options...
hatrack Posted August 6, 2003 Report Share Posted August 6, 2003 (edited) There is a little graphic showing the connector but I didn't have a way to upload. If you send the graphic to me via email, I would be glad to host it. Sorry for the mixup I didn't read the complete article. I'll go back and look some more.. Thanks Dave, I have a host I just can't access FTP from work computer. They block with a proxy. Edited August 6, 2003 by hatrack (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.