FuelSlut Posted May 9, 2005 Report Share Posted May 9, 2005 im sick of looking at my open circuit autometer c2 fuel pressure gauge read 100 psi. I'm also lazy, bored and anxious.... if anyone has an 04 radix system, where they tapped into the right-hand-side fuel rail (passenger side) to include a fuel pressure sending unit.. please let me know what size thread etc. it is. Havnt had the time yet to call up Magnasun and asked them what size the plug is on the front end of the pass. fuel rail. Link to comment Share on other sites More sharing options...
FuelSlut Posted May 16, 2005 Author Report Share Posted May 16, 2005 radix = bolt thread, autometer = pipe thread Link to comment Share on other sites More sharing options...
wkdivr Posted May 16, 2005 Report Share Posted May 16, 2005 On my Radix (04 5.3), the driver side fuel rail has the schrader valve. You can just remove that whole valve, and use your sender. The threads on the sender, and the ones on the schrader valve are the same size- 1/8 pipe thread. Although, I would also like to know what size the fuel rail end plug is. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.