NORCAL SS

Would have to be tomm for rebate. Just holler back

no it is not. the 4 inch rear kit is adjusatble to 3

During the month of July I'm offering a 150 rebate on all belltech complete kit with shocks. You can add in the rear and front djm swaybar also. I would shoot you a custom paypal bill to get it rolling 03 to 06 sss 2/4 front belltech spindles Front and rear belltech sp shocks Rear belltech shAckles and hangers Price is 700 then send in 150 rebate Please add 65 for carrier bearing kit 03 to 06 sss 2/2 front belltech spindles front and rear belltech shocks Rear shackles 550 then 150 rebate you send in Please add 65 for carrier bearing kit 03 to 06 sss 2/2 front belltech keys front and rear belltech shocks Rear shackles 400 then 150 rebate you send in Amy questions just ask and I use paypal for payment. I can and will only ship to confirmed paypal addresses.

delete

can you post your sheet they gave you showing the specs?

1) drice the truck around the block 2) you need to decrank the front keys or will stay up higher 3) due to different leafs used sometimes in rear you will need to use the 3 inch setting ie the lower holes on the shackle

why did you do rear hangers??? should have done shackles. you will nee dto align it.

i sell both shocks and rear swaybar 475 shipped if you have any questions just holler back

yes there is variances. you can grind up that area and will be fine. Ive never had a issue on any sss i did this on or customers that bought kits from me that did it .

One of my customers trucks.. came out clean!!! ORDER PAGE. and i have lots more finishes in stock http://www.tbssowners.com/store/index.php?act=viewProd&productId=402

please take a pic. there are differences on some crossmembers. Sometimes you will need to notch it to clear

It will sit higher but be better. Stock keys with a arms

Yes even morE bind. Use oem keys or spines with arms and oem keys If you want to go this low.

i see this happen with keys and spinldes. this is why i dont sell this set up at all.

ive done a few front belltech drop struts rear belltech shocks rear belltech flip kit Ride is good since your keeping oem springs. Also different leaf springs were used so before i set up/sell a customer a kit i always have them 1) measure the truck from ground to fenderlip in rear 2) measure the rear block height tell me that and i can dial in the kit fully for you

this weekend!!

no the rear swaybar only works with oem exhaust. Usually to do this people on their corsa run a turndown or redo the pipe bend right before the axle

its a different angle replacement so can get better camber/caster. you will need to notch crossmember

that will fix it all

If you want your silverado ss to handle like a sports car and ride great then look no further. I have been selling/installing this set up for years now with great results Front DJM 3 inch a arms Front DJM upper a arms Front DJM Swaybar Front Belltech SP Shocks Rear DJM shackle/hanger kit Rear DJM swaybar Rear Belltech SP shocks BLACK FRIDAY SPECIAL $1300 SHIPPED TO THE LOWER 48 STATES Truck is adjustable 2-3 inch drop in front and 3-4 inch rear with kit above. Also in front you start with new upper/lower a arms with bushings and new balljoints. So if you have high mileage or front end needs work its would be the time to do it. The only option i tell people to add is the rear belltech bolt in c notch. This is due to 2 things. First of all it will give you more clearance in rear for axle travel and 2nd of all it actually boxes in the rear frame section making it stronger. If you pull off the bed you will see how flimsy the rear frame rail is because its not boxed. The C notch would add another $275 to the above kit Any other questions just ask. Tony

WELL THE SHOW MUST GO ON LOL got my forgeline wheels today.. FKN bad asssssss! 18x6 and 18x13 21 lbs front 24 lbs rear tinted lip with stain face/back with z06 emblem I need to take the valve stem out and paint it since stand out to much.

Engine went at 532 miles http://www.c7z06owners.com/showthread.php?29-532-miles-Z06-engine-blown&p=87#post87

ive installed bilsteins on these trucks. The belltech rides and perform better and cheaper price. this is why i sell my kits with them and so no longer touch the bilsteins

that is for 4 shocks also if keys are used in front ride will suffer a lot when lowering

Rear lowered little teaser shot. I need to lower the front more to get more rake by cutting the snubbers so will try to do that today or tomm and filling up on 100 well more stuff today E85 KIT from LT1z Blacked out the ligths and installed