00silverad0

Take em off my hands.

BUMP. I've been told by numerous people to "hold" parts for people. However, Ive had a lot of people tell me, but not delivered any funds to my account. So its first come first serve on these products.

BUMP. I've been told by numerous people to "hold" parts for people. However, Ive had a lot of people tell me, but not delivered any funds to my account. So its first come first serve on these products.

Danny is right. They DO fit in our trucks, but they only need brackets to hold them in place. Brackets are easily available and took me about 20 mins to make 6 of them for my last LS1 efan set up

Danny is right. They DO fit in our trucks, but they only need brackets to hold them in place. Brackets are easily available and took me about 20 mins to make 6 of them for my last LS1 efan set up

Came out of an 01 SS Camaro with 37k miles on it.

Take it easy homeboy... my avatar has nothing to due with this statement. If your going to be ignorant enough to look at a CARTOON picture I have in my avatar and judge my character on it, you are sadly mistaken.

Its a silverado ss, not a 84 caprice

Sure will. You will need a wiring harnessnto connectnto your ecu to run the fans automaticlly though.

UPDATED WITH PICS Fans (still in wrapping) T Stat ASP UD Pulley LED 3rd brakelight

Found more stuff in the garage. I decided to get rid of my Carriage Works 5 pc grille (Main Grill, lower grille & 2 bumper vent grilles) In perfect condition ( I actually polished em before I removed them ) All hardware, brackets and screws included. $165 shipped. OBO Pics of it on my truck 2 A Pillars charcol in color Drivers side & Passengers side w/ Bose cutout $ 50 shipped for both OBO * Drivers side A Pillar clip broke off (just the plastic one) so it dosent sit exactly flush on the post but is barely noticeable

Right now I have a stock pile of parts in the garage and I just need to get rid of em. I'll put pics up tomorrow if necessary, just figured I might try and get some interest started. First up Have a used UD pulley (no alt) w/ belt (never installed on my truck)$ 190 shipped Used 160* T stat (never installed on my truck) $25 shipped *****SOLD****** LS1 E Fans from 01 SS with 37k (never installed on my truck) $120 shipped******SOLD****** Putco Smoked 3rd brakelight LED (Installed on my truck 1 week) $ 80 shipped 2 Silverstar bright white bulbs used in my truck for about 8 months . Fit 03-06 for sure (may fit 99-02 as well, will look later) * I want to say I paid around $50 for these new at autozone ?? So 25 shipped ******SOLD**** I'll be cleaning out my parts shelves tomorrow and taking pics. If there is anything else I find I'll post it up.

Wow man, thats awesome. Im going to look into this. Any info on where we can find these led strips?

AF has T.I's. Good luck with your new career. Enjoy it and be safe.

Wow terry, VERY impressive. Amazing work

I have been looking to do a scsb project since I sold my 2000 . It was the same pewter color and everything. Damn Im jealous. Plus the fact you can pick these things up cheap now and they still have a stout little motor in em. Good luck with the build, I will be following this for sure.

Damn son, your inked up. I think 1 is enough for me.

Im gonna bump this because I've seen posts in here about new tattoos plus I got mine a couple weeks ago. The dog tags are both of my grandfathers. They arent authentic in the format that the original tags are but I didnt wanna include the blood type or religion so I swapped it with the branch they served in. Also for any of you that are in the military or know history of the tags, the lettering on these was before the military switched to using the SSN of members. This was when they were still using the serial numbers. This is from my girls Iphone so not the best quality but you get the deal Here were the pics right after I got it... as you can see in the stars, its still bleeding, but taken on my digital camera so a little better quality

Ya, even my TBTC was a HUGE improvement over stock. I love it

I did this to my 2000 silverado. However, I dont think you can do the same thing on the 03 cluster. All I had to buy was 6 LED Bulbs in whatever color and 6 twist lock connectors to set the LEDs into because you cannot simply just remove the old bulb and plug in a new LED to a stock cluster.

Would you happen to have a 3rd Brakelight smoked as well, if so... im interested.

IM in..I'll have to get you my bowtie when I go away in July. PM me a price if possible please sir. I have 2 ideas I wanna do.

Well, I bought 1/4" washers and 1/4" bolts I wanna say the bolt head is 7mm (not 100%). Basiclly made a tape mark on the spoiler and under the truck where I was gonna drill into. Set it up, made the holes put a washer on each side and a bolt thru the spoiler into the lower undercarriage bumper . On the brake ducts, i had to trim a small piece to let it sit more evenly (still not 100% accurate tho). As far as the brakes..... tell me about it. Id like to get larger brakes, but cant justify spending that kind of $ on brakes. Headlights were pulled apart and cleared. Then the amber deflector on the side was smoked black , put back together and resealed. American Racing RTS Chrome 22's. Discontinued BTW Yes Sir, I LOVE my RTS's . Black and chrome go together really well.

Thanks for the compliments guys. I really need a drop to set it off though.

Well, pulled out the lower grille and 2 bumper vents and hit the mesh with black. I repainted the vents chrome (spray) and installed the new chin spoiler. Couple free mods while I had some spare time.