dkkustoms

Count me in. Let me know an amount and I'll send you more money ASAP.

Funds sent

Yep, still in the original box.

I'm sure you had the best of intentions and carefully thought out your responses and tried not to be rude but alas you failed. You see, there is this thing called etiquette. You may have heard of it. Its generally considered rude to come into someones thread and advertise the same or similar item. It is also considered rude to come into someones for sale thread and make negative comments about the item and/or its price. I would also like to point out that this is a free market last I checked. I have the right to ask whatever price I like. I'm not holding a gun to anyone's head to buy the roll pan. I also mentioned that I don't need or want to sell it, but for the right price I would. Supply and demand will dictate the actual selling price. There are more than a couple of posts by different members looking for these roll pans. You should inform those people as to which retailer/manufacturer they should contact to immediately acquire the same or similar roll pan. Last I checked, BSER was not making them any longer and if he does, the time to get a group buy together can take a lot longer than someone might want to wait. I have at this moment a highly desired item in hand and ready to sell to the right buyer. You are obviously not that buyer. Should you feel the need to make negative posts/comments I kindly ask that you please refrain from posting in my thread and find somewhere else to post.

I'm open to offers. Like I said in the original post "Don't really need or want to sell it but for the right price I will. I know someone mentioned selling a damaged one for nearly a grand so that's where I'll start and go from there."

Been a while since I've been on here, but I heard there are people looking for a BSER roll pan. I have an extra one still sitting in the original box. Don't really need or want to sell it but for the right price I will. I know someone mentioned selling a damaged one for $750 and I'm not sure if BSER is even making them any longer. $1000 OBO includes shipping or meet locals in socal.

I have a set of 24" Dub Dirty Dog 6 wheels and tires. I bought these a few months ago and decided to go with 22s instead of 24s. I'd like to get $2500 for them. They've just been sitting in my garage so I'm asking the same price I bought them for. These wheels normally go for around $800 a piece, the Nitto 420 tires are $320 a piece and Durun F-One tires are 348 a piece so brand new this setup would cost you over $4500. The Nitto tires are 295/35R24 and the Durun tires are 305/35R24. These originally came off a 2003 Silverado hence the staggered tire size. They are 24" x 10". They will fit Escalades, Hummers, Silverados, Nissan Titans, Infiniti Q56, Nissan Armadas, Yukons, Sierras, Avalanches, Denalis, and possibly others. One of the Nittos looks near new with lots of tread life. The other Nittos has some tread life but not nearly as much and has a small tear on the sidewall. The Duruns look equally worn and have lots of tread left as well. There are a few nicks and dings. Nothing major but I just want potential buyers to beware. These are not perfect rims nor perfect tires and the price reflects that. If you are looking for a perfect set of rims and tires please don't bother contacing me and wasting either of our time. If you are looking for a great deal on a set of USED rims and tires then this is it. There are pics at here

Sounds like you've covered most of the bases. Just a thought, any chance your exhaust is modified? Any chance of vapor lock?

Every truck varies a little but I got mine to fit way better by doing a few things. On the right side of the scoop the little relief wasn't the same size as the support bar/bumper brace flange so I cut the excess off with a cut-off wheel. Then I heated the side of the scoop with a heat gun where the relief is and when it was nice and soft pushed it in a little for more clearance. Then I installed the whole assembly and did like detjoe and zip tied the whole assembly to the support bar/bumper brace. The last thing I did was heat up the driver side of the scoop and once it was soft pushed the scoop on as far as I could and held it until the plastic cooled.

I've got a black one. I'm in the San Fernando Valley if you want to pick it up.

Pm sent

My wife got an FX35 as a loaner car while her g35 was in the shop so I took it out for a spin. I thought it was a pretty cool little ride. I wouldn't mind having one. If I was going to get an FX I'd go for the 50 though. Its got almost 400 HP and AWD. You can get the 35 in AWD too but its only has 300 HP, but its also about fourteen thousand cheaper too. Overall my wife's Infiniti has been great. Had almost no problems with it. I think the worst thing was a recall on the headlights that the dealership called us about. We couldn't even see a difference after they switched them.

Talk to David specifically at the partsladi. Tell him Dkkustoms sent you and he'll take car of you.

If a certain someone was making them I'd be interested as well. Now they would probably want at least a group of five or more I'd guess. So with jlosh20s and me, we just need three more people. Anyone else interested? What would be really cool as well would be if that same person made a cover for our fuse boxes as well. I wonder what they would cost?

Looks like a 78mm by the looks of the three mounting bolts but I could be wrong.

Sorry, forgot about this thread. If you are interested in the brackets the person to talk to is rudy91040 on here. He is making them and has some ready to go from what I hear. Here is a link to his thread. ZO6 adapters

I'm interested in the gas tank, sending unit and the fuel lines if you still have them shipped to 91605.

So good news and bad news. Bad news is I can't sell the brackets I made. The insurance is way to expensive and I can't risk the liability. Good news is I was contacted by someone that was interested in making them and he has them ready to go. His name is Rudy and this is his email. He is a stand up guy and is releasing them in the same order I was going to. I've already pmed anyone that pmed me about a set for stock spindles. Sorry about all the delays and such. I really wanted to produce these but its just not worth losing everything to make a few bucks. So here is is email if you are still interested. [email protected]

Just giving you guys an update. Release is going to be a little later than I had hoped.

PM sent

Price is going to be $300. I wanted to offer them for cheaper but like Ray said before, these things are not cheap to make. I haven't taken any pre-orders or reserved any, but I've kept every email that I've received from anyone interested. I will try to offer them in the order that people emailed me or posted that they were interested to keep things fair. I know there are a lot of guys that have been very patiently waiting for me to be done with these. I appreciate your patience. If the first batch sells out I have the material to do more and the wait won't be nearly as long. The version for the McGaughty drop spindle is still being worked on but I'm planning on doing the rears first which will be a little while before I can get back to them. Also, anyone that purchases the fronts and purchases the rears if/when they are done will receive the rears at a discounted price. I had hoped to have the fronts and rears all done to offer a discounted package deal but lack of funds prohibited me. Thanks again for all your patience guys.

Hey guys. Sorry for leaving you all in the dark. Long story short, had to go out of town to work because my regular job had no work for more than 2 months. I've been working 7 days a week trying to make up for lost work and haven't had any time to even think about getting online. Anyway, I'm back. The first run is all done and finished. Hardware should be here by the end of the weekend are I've almost got everything else sorted out. Should be ready to ship before the end of the month. Hopefully sooner.

Hey guys. Sorry for leaving you all in the dark. Long story short, had to go out of town to work because my regular job had no work for more than 2 months. I've been working 7 days a week trying to make up for lost work and haven't had any time to even think about getting online. Anyway, I'm back. The first run is all done and finished. Hardware should be here by the end of the weekend are I've almost got everything else sorted out. Should be ready to ship before the end of the month. Hopefully sooner.

Look at the post above yours.

Yeah it would be a lot easier except for the fact that in leaves me wide open liability wise if someone does something stupid, gets hurt, kills someone, etc and then they come after me personally. Then I'll get to spent a whole lot of money trying to keep some lawyer from taking everything I've ever worked for. Regardless either way if I don't charge sales tax and the California Tax Franchise Board finds out then I'll pay more in penalties and fines than I'l make. All in all its not worth the risk for me. If the brackets sell I plan on producing them in batches until people stop wanting them. I also have plans to make other products that I think others might like as well. So basically its a bit more work now, but I am a lot more protected and gain a lot more in the end and people will get something they want.