dkkustoms

Sorry guys. I'm answering emails and getting pics uploaded as fast as I can. Please bear with me.

No rear bumpers. Only made the roll pans.

Last one is sold. As of the moment there are no more left. If there is interest in them again at some point I may have more made. I still have the mold.

Thanks guys, I appreciate it. As much as going through a divorce, losing my house and then my truck being stolen sucks, as long as I have my two little girls and I can make them smile I'll be ok.

My 2005 SS was stolen while I was out of the country working. Cops found it pretty banged up but I still bought the truck back from the insurance company. I will be posting up misc parts as I pull them off or as I find misc parts I never got around to installing in my garage as well as pics. Any part listed on this page means it is still available. All prices are OBO. If there is any particular part you are looking for, feel free to PM me. Interior is mostly all there. Cladding is all mostly beat up. It still starts up and runs. I'm located in Chatsworth/socal/San Fernando Valley. I've been dreading doing this but its time to start. If any of my prices are way off please let me know. If you refer someone that buys something I'll send you a few bucks for a finders fee. brand new Gates 38518 HD tensioner $70 brand new 25321788 Tahoe intake manifold zero miles, injectors, fuel rails, etc no throttle body $150 brand new Z06 caliper setup- calipers, hawk pads, rotors, brackets, guide pins, $2500 ( I think I may have banjos and braided lines as well) used LQ9 heads bought them used, plans changed and never took them out of the box $200 new carbon fiber radiator cover $550 new carbon fiber bowtie emblem $150 used Meziere WP319 black water pump $550 used Meziere WP319 raw aluminum water pump in pieces (took it apart to annodize, strpped it and never finish so it needs assembly) $200 used extra overhead console painted gray by previous owner $25 used extra overhead console beige with homelink, sunroof controls $75 used 78mm radix j tube $100 used Ls2 90mm throttle body (silver blade) $250 used LQ9 78mm throttle body $50 (6) new Dynatech v-clamps/v-bands $45 each or all (6) for $250 new Radix rubber bellow $50 new ARP LS1stainless header stud kit part# 434-1301 $100 new Magnuson crank pinning kit $60 new Magnaflow stainless x pipe (not polished) $75 (2) new Tru-Cool transmission mounting kit (1 open and 1 sealed) $10 new water pump spacers 3/4", 5/8" 1/2" ( I may have some gaskets) $30 each or all 3 for $60 new Moroso fill neck kit part# 63423 $25 new MSD ignition box vibration reduction mount kit part# 8823 $10 used AVS smoked headlight covers (all 4 have light scratches nothing major) $40

FYI, for anyone that wants a roll pan, I have one left. I'm not sure if or when I will make another run. 818-681-9776 text me if interested

Sorry to hear that man. If I remember correctly, you had Z06 6 piston calipers in the rear. That in itself is a very rare thing. If I'm right, that could be a very easy way of finding the person.

I have a brand new, never mounted radiator cover and bow tie collecting dust. I don't need to sell it. In fact an kind of don't. But for the right price they are yours.

Thanks guys. I appreciate it

Just a heads up for anyone wanting a roll pan. I need money to pay my divorce lawyer so I'm putting the roll pans up on ebay. Unless there is a sudden rush, I don't anticipate offering them again any time soon if ever again.

Thanks for the kind words. FYI, if anyone is interested in one of these roll pans, I don't know how much longer I will be offering them. I'm going through a divorce right now and I'm probably going to have to sell my house. If I do, I'm not sure when I will be able to buy a new house and I'm not sure if I will have anywhere to store the mold let alone another order of 10 roll pans. Currently I have 5 roll pans left. If anyone wants one, get them while you still can.

Yep. Pm me here or email direct. [email protected]

Got it. I'll ship it out tomorrow.

Roll pans are in. You can send $600 to my paypal [email protected] or I can send an invoice. Thanks Eric

Just a little update. Talked to the fiberglass shop today. They are a little behind. They said that they should be don't by Wed or Thur of next week.

Should be ready before the end of next week.

Just dropped off the mold to get more made. Should be two weeks max I was told.

The next run will be $600 each. Not sure when it will be, I have to have a day off during the week or take a day off. Feel free to remind me of you haven't heard anything back in a few weeks.

Copy

Already replied Hobie. Thickcajun, I have one left at the $550 and then I have to have more made. I already sent a funds request to another member but he hasnt paid yet. I can send you one as well. Whomever pays first will get it at that price. The other will have to pay $600 and wait for moe to be made.

The air brushing is by Air Syndicate, if I remember correctly is a bunch of really talented guys. The upholstery on the front seats looks like a new guy did them. Way too many wrinkles for a basic insert. The colored tint was typical style back then too. A bit expensive to me, but I'm sure someone will think it's all kinds of sexy and willing to pay the price.

Nope, not me. That guy has been advertising those for a few years and to my knowledge, nobody has purchased one from him. In fact, the pics he uses aren't even pics of the roll pans he sells, they are of BSER roll pans. Last I saw, the pics he uses are of members trucks from this forum, I don't remember who. The specific picture you posted was someone showing side by side the difference between just bolting it on and molding it into the side cladding.

Where are you located Labeastss? I've got a black one of you are in LA/SoCal area.

2 left at the $550 price. After that they go up to $600

Texting now