Corpserodeo666

This is just a feeler unless I can get some one serious about the kit. I have had this kit for a little while now and maybe put on 300 miles on it. I am interested in going larger, that is my reason for trying to get rid of it. The kit is still on the car, but it can be removed with no problems. I also have the BMR K member for the car that is also available. It is the standard kit, and not the extreme kit. The turbo's don’t leak and the turbo’s don't smoke. The kit is in almost brand new condition. If you have any question regarding the kit, or would like to have more info about it, please feel free to let me know. Please only serious offers. If you know anyone who would want the kit please let me know. I am trying to get $5200 for it without the K-member, and if you would like to add the K-member add another $400. Shipping is included in the price of the kit. If you would like to see a few photos of the kit let me know, I can e-mail them to you with no problem. Thanks in advance.

Go to your internet options under tools and restore and reset your defaults. It should reset the settings to what came default on your browers. Also what browser are you using? Also check your site restrictions under security and restricted sites, but if you have more questions just PM me and I can help you out.

I'm in IT and I've been so for over 5 years as a proffesion. Download Malwarebytes at Malwarebytes.org in either safe mode or on a flash drive and load it on, and run it. The name of that virus is called a Vondu virus, its sort a trojan that hides in your registry. It can be a PITA, but that program will get rid of it. Run the software once, do a CClean and you should be good to go. Trust me on this it will work.

I was about to buy this truck but I went another route Instead. I have no idea who built the motor, but I know it has a Nasy Performance Fuel system, and an "upgraded" STS kit. Where are you located?

Is this the truck from West Chicago?

"Man, thats only in the morning." I hope you guys know what I'm talking about. If not I can refresh you in a later post.

Didn't see that thanks for the correction. Thanks!

What about Walter Payton?

Got it. Its a sick build regardless, I just want to see some dyno pulls on this monster. It just looks like a similar build I wanted to go with, I'm just on the edge of seat to see this thing done now.

No I understand I was just comparing his cam spec to mine. It really all depends on how the car will react to it and what you really like.

I get what your saying. I'm running the same heads in my 408 setup with my twins. But my cam isn't as aggressive, just wanted to pick your brain for a second i guess.

Kurt Urban is a legend! Just a thought, arent those cam specs a little too aggressive for an FI build?

Ill keep your number around. I know lots of people in the foreclosure and development business. Ill try and put in a good word for you. I always enjoy helping out local business.

Sure, Ill join this bandwagon. Here is a photo from my friends building in Chicago. This is the 1st time that I've seen a yellow one. And Panda Express has to re-thing they're advertising. Soon!

One last bump before ebay.

All pm's replied.

They are 2.5's but can be easily modified for a 3 or larger at an exhaust shop.

If hes interested he can PM me. But ill take care of it thanks bud.

bump...

I have a MAF sensor from a 2000 Trans am. It has maybe 20k miles on it. I would take $70 shipped for it. Please feel free to PM me with any questions. Thanks in advance.

I have two stock exhaust tips, that have been laying around since 2005. They just need to be polished up and they will be good as new. I would like 40 bucks plus shipping for them. Thanks guys.

I just picked up a 2000 TA and the paint is in good condition, but the car needs to be refreshed a little. I was thinking of giving it a deep sponge bath, a little clay bar action, then a little wax and a little polish to finish it off. I use all 3m products as far as the waxing and the polishing goes. I just have never found a good clay bar product. Is there anything you guys could recommend? Or a route I should take. Thanks in advance. I meant clay in the title. Sorry for the confusion.

Ok guys, so I followed your guys's advice. I took a personal loan for the car. I got a rate of 8.25% on a personal loan which isn't bad. I also got it from a farily large bank (which suprised me). Im going to be getting the car next week. I will def. Take some photos. of the TA. Thanks for the input guys, all of it really helped out.

Thanks for the input guys. As soon as I get the car, or if I get the car Ill throw a few photos of it up.

Yeah im going to go try a bank that I have done buisness with before on Monday. I hope it all goes through. I mean I honestly don't remember a time where it was this hard to get a loan for anything.