Jump to content

BmanSS

Supporting Member
  • Posts

    770
  • Joined

  • Last visited

Everything posted by BmanSS

  1. At first there was nothing then the noise sounded as if it was coming front the front diff, almost like the axle spun freely for a split second then caught. Please any info would be greatly appreciated Rob By what you just described it sounds like the Viscious clutch in transfer case is going bad,drain fluid if its looks like some bad grease or a silver color thats your problem.if you catch it in time you can change it with out replacing the whole unit.The viscous clutch works like a limited slip diff if that helps Good luck
  2. I wana go ................ok im going ,dont wana be a p*** an say its to far
  3. I Spray off of the line and through all shifts ,running a zex 125 w/s , kit its the simplest thing to install.very user friendly
  4. Welcome to the jungle Jerry. You may have just opened Pandoras box.lol And thanks again for holdin my tires at the track a while back !
  5. Things /people and the way we do things are a hole lot diffrent down here in The Greatest State of The Union !
  6. If it was still pulling strong 1st n rev ,you probably wont need anything other than a front seal and the other plastic pieces......and all of that stuff comes in the rebuild kit. I use a hose clamp and a 2 bolts for pins to line up the pump halves if you can find a long enough worm gear house clamp to go around the outside edge of the punp get it ,or you can put a couple of clamps together to make it long enough. line up the halves with OUT the outer o-ring on it and make sure the bolts you use are not sloppy in the holes,drop the bolts in opposite of each other and tighten the crap out of the clamps .that way the pump is lined up 2 ways. Torque the pump bolts down , take the clamp an 2 line up bolts off, leave the teflon seals and the outer oring off ,now you should be able to drop the pump into the case w ease if its alined correctly pull it back out and put your seals on and put it back in. You will need a special tool to install the seals on input shaft also good luck
  7. I have a set of them ,didnt like them .This is what im running now
  8. In the infamous words of George Thorogood " Bub bubba Bad ,Bub bubba Bad ,BAD TO THE BONE "!
  9. 275/65 15 MT drag radials 60' 1.9 2WD 273's
  10. when you come to a stop and motor dies ,does it feel like you forgot to push in the clutch if you were driving a stick? If so you may have a bad lock up switch
  11. swimming in 2 weeks dont put your trunks on yet ..............You will be sweeping it for2 hrs , 2 twice a day for at least a week . thats the hardest thing about owning a pool
  12. i have a black 05 ,took it off at 1500 miles,in Dallas PM if interested
  13. Greetings,hope your pockets are deep
  14. That explains everything now I used to haul water there many moons ago for the Perkins.Welcome to THE CLUB Jed.
  15. Been real busy ..........Happy Birthday to me!
  16. Tats bad Ass Bro,keep an eye on the Wroms! Permian Basin Chapter Member, N.S.O.F.T. Retired
  17. Mine too ,but GM gave me some new one's FREE
  18. "And then a Beam made,of Light hit the Ground", Billy Thorpe
  19. Paybacks are hell................TBC
  20. Here's a little vid http://videos.streetfire.net/video/Testing...18-th_78182.htm an some pic's
×
×
  • Create New...