Wheatley

Thanks guys!! Let me know if anyone needs anything [email protected]

Good point Zippy,yes you can log the truck as always and run diagnostics of course,but you will not be able to read or write the pcm. If you need anything,just send me a PM Thanks Guys Wheatley

That is correct,the pcm would have to be unlocked and returned to a factory tune In order for the handheld to work.If you need it done,i would be happy to do it for you Thanks guys

Correct,as stated above you would need VCM suite in order to load tune files. VCM scanner is just for logging,that way you can email me the log files and then I can do a reflash for you. If you need anything,just send me a pm or email me at [email protected] Thanks guys Wheatley

Hey NIck,I have one of you would like it? Just let me know bud,i can either ship it to you or you can pick it up.

Hi Reed,I reflashed the PCM and it was mailed back out today. Hopefully you get it lined out,I don't see it being the PCM but maybe it was a bad flash or something odd. You will have the PCM hopefully friday!! Email me to keep me updated. Thanks guys Wheatley

Up for sale is a PI Vigilante 9 1/2inch 3600RPM stall speed Torque Converter for 60e/65e transmissions. This was my personal torque converter in my crewcab for about 3 years.I went to a different setup and needed a tighter converter,that is the only reason this is for sale. 625.00 Firm If you are interested,please send me a PM I accept paypal Serious buyers only please!! Thanks guys

Thanks for the compliments guys!! If anyone needs anything,please send me a PM or an email at [email protected] Thanks

Sent a PM to the OP Thanks guys

Amsoil in everything using oil analysis

Looks like I need to get my santa costume out!! Merry Christmas guys,have a safe and happy holiday

That is awesome Nick

No sir do not install them without a retuned PCM,a reflash is a must!

send me an email or a pm and I can give you one.

Hi Matt,a pm has been sent to you with my shipping information and I will get it taken care of for you.

We can get you a stock unlocked pcm sent out or a pcm could be mailed in to be unlocked.They are all locked to my cables as always. I understand this can be a hassle,if you need please send me a pm and we can exhange pcm's or a pcm can be mailed to me. Thanks guys

Looks great

I just realized this has not been answered.Sorry about that It does not like the converter being locked N/A,it feels good when it locks but the times and MPH say otherwise,so i leave it unlocked. The converter seems to work very well,I wouldn't mind alittle more but it flashes pretty high as it is.I like the converter 4.30's will be installed shortly The Runs were with 28 inch MT ET Drag's which belong to TXSilverado.I wanted to try them and he was kind enough to let me.this will be my next set of slicks for this Fall/Winter!! It runs on e85 at all times now

Thanks Again Justin Can't wait for the new setup Pm sent

In my opinion,I would get the B&B Triflo or a Corsa.Expensive but well worth it

Great to hear,thanks again

3800-4k stall converter with 40k tru cool and I never see over 140-150 at the track or cruising

Good to hear you got it fixed,sucks to hear what was wrong. It is to damn hot down here to go without AC,that's for sure

Good to hear. That is how they are,they will shift firmer as throttle angle increases,which is how they should be. If you have any questions about it,you can send me an email and I will direct you to the builder.

For Sale is a set of 8 Mini Delphi (8.1 Marine) 42 LB @ 4 bar FLOW MATCHED injectors from Jon at FIC. These were on my Crewcab and have about 1,000-1,200 Miles on them,the truck sits in the Garage!! I Purchased them November 5 2010 from Jon at FIC and they do come with the flow sheet. Of Course there is nothing wrong with them,I am having to go bigger. The injectors are 479.00 new from FIC They are for sale for 425.00 FIRM!!!!! Serious buyers ONLY please. I will have pics of them up late tonight To purchase,send me a PM paypal accepted Thanks Guys Wheatley