Jump to content

misterp

Supporting Member
  • Posts

    13,413
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by misterp

  1. I would buy it, definitely. You are already kicking yourself over the possibility of letting this deal go by, and regret is a bitch - no regrets I say. Now this is assuming you have the funds to do so, if not get a loan and work a second job!!! I love the Sy/Ty, and since you want to keep it I can assure you the value of it will not go down in the future! Mr. P.
  2. How did I KNOW YOUUUUUUU would say that? But, now that you mention it 3-grand is right around the corner. Maybe I should try to outdo FuelSlut one of these nights, try topping 100 posts in an evening??? Hmmm wonder how many pics I've got here in my soft porn collection.... Mr. P.
  3. Wow some of that is some really serious stuff. Glad to hear you got it attended to. Mr. P.
  4. What happened? Somebody didn't like your how to posts? Details? <{POST_SNAPBACK}> I guess not; a loser left a flaming insult in the guestbook in my garage/SS registry rather than deal with me directly about whatever it is that bothered/affronted them. Oh well life goes on. BUT here's the REAL mystery - the guest book was empty when I added my last round of mods several weeks ago, but this new anonymous hate message is dated July 2005. So the question is, how does an entry show up sometime during this last week in my guestbook which is back-dated to July 2005? Things that make you go Hmmmmmm.... Mr. P.
  5. It still smells like a scam to me - if I was trying to sell a car I make every attempt to be 'available' to potential buyers. Hey - maybe you can use the new eBay 'Negotiate Your Price/Best Offer' to make him scam you for less?! Mr. P.
  6. OMG Gotta admit Brian's got a point.... Mr. P.
  7. dc_justin, where are you?!!! Mr. P.
  8. Man I dunno. Too good to be true. Even if it's not a numbers-matching car I would still want to see it and the title. Most people that can afford to own a real half-million dollar car know how to spell Eleanor. Maybe there's a typo and some zero's are missing? Mr. P.
  9. YO! Well you won't loose money reselling it, that's for sure.
  10. Thanks guys, I'm ok really. For those that are TOO DENSE to get what I'm trying to do in this thread, I'm trying to piss them off enough to make them block me. Yeah fuelslut, it was a kid in a corvette... Mr. P.
  11. Awesome - I was just reading today about a AWD Syclone that runs 9s, can't wait to see what you do with it Mr. P. edit - love the last owner's stylin' muffler!
  12. I'm no site moderator but wanted to point out to everyone that there is a BLOCK feature on this forum, if ever you do not want to see what another member is posting because you have been offended or do not agree with their perspective then you can add that username to your block list and never have to read said member's site contributions ever again. If you do find issue with another member but cannot bring yourself to raise and address your concerns in a socially responsible manner then I beg you use the site block feature. And by all means please resist the urge to lower yourself to a whiney cowardly crybaby bitch and avoid actions as hopeless and pathetic as leaving an anonymous character slam in a fellow member's guestbook where nobody else will ever find it (let alone read it) until six months later. This advice really is for everyone's benefit, as it makes forum life much more social plus prevents you from displaying yourself as an ass in public. View these subversive behaviors for what they really are, woeful desperate pleas for attention; and if you realize that you cannot control these self-defaming urges please seek help from a counselor, doctor, or priest, there are fine dedicated people and medications to help with these issues (according to Oprah and the commercials I see on TV). Mr. P.
  13. I.. I.. couldn't help myself - I had to post a reply I guess that makes me an easy post whore Mr. P.
  14. Hi Darren, I am excited that you joined and chimed-in. Jeff had just passed away when I bought my own SS and joined the forum, I was a pretty raw newbie at the time. It is very rare to find an individual that both knows his dream and also does what it takes to make it happen, I am sorry that I missed the opportunity to actually spend time with Jeff and share his excitement for the truck. The fact that you finished his dream for him is a true testiment to your love, that is rare. If you ever display the truck again I would enjoy meeting with you, both to learn more about him and enjoy his finished dream. Mr. P.
  15. I dredged through all the lowering-related threads, and here are some technical high points from 2-3 years of talk on the subject: FRONT: * changing the front suspension more than 1-inch up or down will create HUGE changes in suspension camber, the truck will "walk like a bull dog" until it is aligned so remember to budget for a good alignment as part of the project; * Spindles are preferred over keys or nothing at all, nobody has ever posted that they wished they used torsion bar keys instead of spindles, nor has anyone said they regretted using spindles; * correctly installed/adjusted spindle kits have a small improvement in handling by significantly lowering the truck's center of gravity, the torsion key swaps retain near-stock body roll, and torsion bar jobs have shown significant increases in body roll (due to loss of suspension travel) with several saying they seriously feared driving their freshly lowered truck; * Early McGaughys (pronounced MA-goys) spindles caused an increase in turning radius - this design oversight was corrected in later spindles, and Belltech spindles never had this problem; * Front lowering spindles will only fit a 17-inch or larger rim, and as the spare is a 16-inch rim this means that you cannot use the spare on the front any more however you can put the OEM spare on the rear and move a good rear tire up to the front; * Torsion key swaps will require that you relieve spring pressure by using a special tool or 7-ton puller to uncompress/re-compress the torsion bars (rent from auto parts store), several have tried using hardware store c-clamps and the clamps failed (busted) in the process; * a few enthusiasts who bought the torsion key kits (not all) changed over to, or later added, dropped spindles and reported that doing so finally made their efforts worthwhile; * Lowering the suspension by cranking down on the torsion bars to excess has in cases caused loss of suspension travel, spongier ride, alignment issues, and darting under braking; * many that cranked down their torsion bars (rather than use keys or spindles) later either regreted it, changed it, or admited that they were living with a compromise in handling but appreciated its cheap cost; * Dropping the front of the AWD SS more than 2-inches (by any method) risks causing CV-joint binding and hence front-end vibration which is felt under acceleration at specific vehicle speeds in the steering column and firewall, and will momentarily disappear as you travel over a bump in the highway - it was discovered that this is corrected by cranking the torsion bars back up a quarter-turn at a time until the binding/vibration is relieved; * vibration can also come from the truck riding on the bumpstops, and Mike McGaughy recommends improving ride quality by cutting 1/3rd off the factory bumpstop (one 'nub') - there are also shorter aftermarket bumpstops on the market (stylinconcepts) but they are harder than the OEM rubber ones; * Spindle kits allow you to retain stock-length shocks, torsion key kits and adjusted torsion bar jobs will benefit from correspondingly shorter shocks as there is less suspension travel (the Ground Force and Belltech units come well recommended), but are not absolutely required as the suspension will bottom-out before the shock does; * There have been fit-up problems with the McGaughy's spindles on '05+ trucks, as the OEM ball joint design was changed with introduction of larger OEM rotors; this requires an advanced installation workaround. REAR: * Installing aftermarket leaf spring hangers (secures front of the leaf to the frame) is an absolute biatch of a task as the OEM hangers are riveted and must be ground/torched/drilled out - you'll cry tears of pain in the process and tears of joy when it's done; * If installing leaf spring front hangers you must remove the fuel tank for access, prepare beforehand by running the truck almost out of fuel as each gallon weighs 6.1 lbs; * the best way to get the spring hanger rivets out is with a cutting torch, a skilled hand will have both hangers off in 15-minutes flat - the second way is to grind the heads of the rivets off with a 4.5" grinder (or air chisel) and pound them out with a 5/16" drift punch and 3 or 5-lb sledge hammer, this will take several hours; IF AT ALL POSSIBLE get a torch! * I discovered it is easiest to remove the spring hangers if you cut/grind the outside head of the rivets, not the head on the inside of the frame rail (trust me on this, after grinding on the inside heads you will still not be able to hammer them out with a punch, grind/cut/torch the outside ones) * step-by-step: first cut/grind down all six outside rivets (and don't worry about digging into the bracket), second use a 5/16" drift punch to punch out the bottom two rivets, third use a 3 or 5-lb sledge and *bash* the hanger off from the inboard side (3 or 4 solid hits on the bottom-inside edge of the hanger will have it free); after removing the hanger, it is an easy job to pound the rivet stubs inward through the frame rail until they're flush and then a final few hits with the drift punch will clear the holes; * though not required a few have pulled the truck bed to make the job easier (8 bolts, a couple extra friends, 20-mins); * On heavily lowered trucks with the large aluminum driveshafts (SS) it is highly recommended that the mid-bed frame crossmember be cut-out the as it adds no support to the frame (it's not much thicker than exhaust tubing) and will strike/damage the driveshaft if the truck *totally* bottoms-out; * When using the recommended combination of front hangers and rear shackles it is still important that the installer uses the correct bracket configuration to maintain the critical pinion angle - this is a mistake a lot of McGaughys installers make and according to Mike McGaughy to set the correct pinion angle (assuming his 2"/3.5" drop kit) the leaf spring is to be attached to the front hanger using the 2-inch (lower) hole, and to the rear shackle using the 1-inch (lower) hole; * using only rear leaf-spring shackles (without front hangers) will certainly alter pinion angle and introduce vibration that can be felt in the seat and/or floorboard, several have reported that this is corrected with installation of either a 2, 3, or 4-degree shim - the thick part of the shim is oriented to the rear of the spring; * vibration can also come from the truck riding on the rear bumpstops, an improvement in ride quality can be gained by removing the mounting bracket from the rear bumpstops and remounting the bumpstops to the frame (an OEM mounting hole is already present for this), also Mike McGaughy has said that the rear bumpstop length can be cut down as short as 1/2-inch if desired; * The McGaughy's deluxe kit (comes with both hangers and shackles) maintains stock-length shocks; * Hard-core tech - according to Ground Force engineers, the OEM Silverado SS pinion angle is 3.8, driveline angle is 2.8, and trans angle is 5.7; * If the truck is fitted with a rear sway bar, the links ("dog bones") will need to be shortened/modified so that the bar is level again in its resting/neutral position; * towing with a lowered truck can get bumpy (as you are bottomed-out on the bumpstops) but does not present any problems, several have installed either an overload/helper spring (low-tech) or the Firestone rear airbag kit (high-tech) with great success - owners of the Firestone kits rave about them; * it may still be necessary to have the driveline (U-joint) angles double-checked and corrected by an experienced driveline, 4x4 off-road, or chassis fab shop to eliminate driveline vibration, this could require shimming or shaving of engine mounts, transmission mount, or axle mounts to restore correct drivetrain geometry. COSTS (GIVE OR TAKE): * Several have reported real aerodynamic gains after lowering - both increased fuel economy (1-2 mpg) and top speeds; * Complete drop kits featuring front spindles cost between $400 and $450, and require a moderate-to-professional degree of automotive skill (or talent) to install - these are not newbie friendly kits and will take 6-12 hours to completely install; professional shops typically charge $300-400 to install a complete lowering package, not including price of the kit, so if you elect to do this the final expense could be anywhere from $750 to $950; * For those contemplating a front spindle kit DIY, rice750sxi was nice enough to document his McGaughy's front spindle install here; * Complete torsion key kits cost anywhere between $265 and $385 (depending on whether they come with new shocks or not); the torsion key kits can be installed in a half-to-full day by most automotive novices right in the driveway with the help of jackstands, a rented key compressor, and a couple favorite beverages - since these kits cost less plus do not require professional labor they can be a decent bang-for-the-buck option; * The low-budget lowering option is to crank on the torsion bar adjustment bolts 6 to 8 turns, install rear spring shackles and shims, hacksaw-off all four suspension bumpstops, and take the truck in for an alignment - total project is between $100 and $150, excluding shorter shocks; don't go more than 1-1/2 inch if you choose to do this. FINDING PROFESSIONAL HELP: * lowering a vehicle is an exact science, there just aren't very many qualified, experienced 'scientists'! * If you are searching for a shop or installer first try major/well-established 4x4 off-road shops - these facilities mainly raise trucks all day everyday for a living so they are *very* comfortable working with aftermarket suspension and very intimate with the details of proper suspension and drivetrain alignment. Do not take the truck to just any local front-end alignment place, you want a shop that customizes suspension all day every day and the 4x4 crowd has already conquered many of the mentioned issues in their own projects; * If you are having trouble finding a competent off-road or suspension shop, get opinions from several driveline balancing shops as they will be able to steer you to those that do have their 'black-belt' in both suspension installation and drivetrain alignment/phasing. TESTING: * I cannot stress enough, test on known good (balanced) tires. The wheels/tires have got to be as perfect as possible for later testing or else you will have a shake but not be able to decide if it is a tire (or multiple tires), or rim, or driveline, or CV joint, or bumpstops, or something else unrelated. Use wheels/tires that you KNOW are in balance so that any shaking discovered can confidently be traced to suspension modifications, not new (out of balance) tires or rims. * I've found the easiest way to reveal vibration is to slowly gain speed at WOT, so imagine pulling the steepest grade you can think of while trying to put a lot of power through the drivelines; because the truck is speeding up slowly you will not blast right past a shaky-spot on the speedometer, plus you will be putting so much power through the drivetrain that any mis-alignment in the drivelines will be made obvious; * Rear vibration - felt primarily in the kidneys, seat bottom, or the floorboard. There should be none! Evidence to this point on these trucks suggests that rear pinion angle mis-alignment will reveal itself as a strong 'humming' vibration at 67-73 mph (depending on tire size); you will know it is the rear driveline as the vibration will always be present but intensity increases with engine load - the more power you are putting through the driveline to the ground the stronger the shaking is - coasting, you can't feel it; pulling a grade at 70mph full throttle, it's pretty violent. Mr. P.
  16. Thanks for the good idea. Mr. P.
  17. Just so everyone reading this is clear - I am not displeased at all with JAG Performance or in the products I purchased (the opposite, I love it); the topic discussed here was making a how-to on shift kit installation and I was only speaking to the point that I know there is already a installation video available from TransGo for their shift-kit. Mr. P.
  18. Yeah I was thinking of doing a how-to when I did mine, but you would need a whole family of how-tos, one for the Zippy kit, another for the transgo kit, another for the servos. The TransGo kit is *supposed* to come with an instructional video although I never got one with my purchase from JAG Performance; but instead Joe did share his cel phone number! Mr. P.
  19. Making sweet love, down by the fire... Mr. P.
  20. My doors leak bad, I think I am going to ask the dealer to have them looked at this winter. I also had a howl > 90mph, that was corrected by replacing the pass rear window. Mr. P.
  21. shift kit: TransGo HD2-C servo's: Sonnax 4th Gear "Super Hold" Billet Dual Servo, Corvette 2nd Gear Servo where did you get your kit? JAG Performance who installed it for you? Myself initially, then Joe Guttierrez (JAG Performance) uses of the truck? Commuting, real fast commuting what torque converter do you have? Torque Converter Shop TCS 2800 any other transmission modifications you have done/had done to your truck... B/W low roller clutch, 5-pinion front/rear planet assemblies, hi-po output pump slide spring, B/W 29-element forward sprag, steel .5-in boost valve, wide red band performance lining, Z-pack 15-element hi-po 3/4 clutches, Beast HD shell w/ bearings and wide bushing in reaction gear, hi-po forward & overrun clutches, B/W low/reverse clutches, hardened pump rings...
×
×
  • Create New...