Jump to content

christobear

Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by christobear

  1. What did you use to repaint the fender wells?
  2. this is awesome. I will need to do some similar work on my 05. No rust, but the roof, hood, and bed are peeling. Plus will need to do the headliner, leather repair, and then next up will be a motor rebuild. It runs well, but has 170k+ miles and I want to do a cam at least, if not possibly a blower. I like that tailgate spoiler, where did you get it?
  3. Welcome! I'm new here as well and got a vic red 2005 just a few weeks ago. Bought mine from my brother-in-law who was the original owner. 168k on the clock C He put on a cold air intake, headers, and exhaust with electronic cutouts. Cutout valves were broken so I had to get blocking plates cause it was stupid loud. So far I've changed out the shocks, installed 2" drop shackles, installed a new stereo and backup camera, replaced all lights with LED's, and polished the headlights. Next on the list are brake job, front-end rebuild, and oil pan gasket
  4. yea, and that's just one part that should be pretty simple to identify. I am quickly learning that many parts sites don't really know which parts fit these trucks.
  5. eh, $15 bucks off isn't much of a discount. Amazon also has them and they'll be delivered in a day or 2 with easy returns if needed
  6. I recently asked this as well. it seems that the Belltech Street Performance series shocks are the way to go. Part numbers I was told are: 2212ff for the rear and 310400 fronts about $240 for all 4
  7. Hi all, new guy here and hoping to get a clear answer on which Belltech part number to order for stock ride height. Depending on which website I'm on, I seem to get different answers. There's 2212FF, 2214FF, and 2215FF....which ones do I order? Are the fronts 310400? Also, will the answer be the same if I want to go 1 inch lower than stock?
×
×
  • Create New...