CZBLK04SS

I was actually just wondering the same thing. I currently have Belltech 2" spindles and Street performance shocks. I'm debating changing to DJM LCAs but I don't know if the Street performance shocks would work with them. I'm not even sure if it is worth swapping the Spindles out for LCAs, I'm just not really happy with the ride from the spindles.

Looking to buy Black Passenger side rocker molding. Please message me if you have one available.

Dirty air filter, Dirty MAF?

I'm still looking for a bed, anyone know of any for sale?

Nice, do you just have to turn them on in the PCM or do you have to set on/off temps too?

Did you use an OEM fan or a Replacement from 1AAuto or Dorman. So it's just fans,harness and tune?

Payment sent

PM sent

Preferably black but would entertain other colors for the right price. I don't need the SS moldings. Wheel wells are starting to rust again after having patch panels put in 2 years ago. I don't want to pay 4-5k to get the bed sides replaced, need to either replace the bed or unfortunately sell the truck.

How much did you end up selling this for, I might have a full set to sell soon. Just trying to get a round about price figured out.

I was having vibration at around that speed also. It ended up being my idler arm, I replaced the Pitman arm too.

That's how I usually go about it also, it seems like the price on these doesn't differ too much. You're definitely right on that one, you think you're getting a better price until you see the shipping...

I got the pricing through Tasca, the prices are usually the same as Gmpartsdirect. They're basically the same site, Tasca actually had pictures of the parts though.

I actually did get a chance to get under the truck yesterday and also called Dorman tech support, I figured out what I needed to know. From firewall to bed is 1-2-3. It looks like everything I need would be $365 from GM, Dorman stuff would be $265 from RockAuto.

I guess I've had pretty good luck then. Do you know if all the mounts are the same for the cab or what the position numbers are?

I haven't really had any issues with the Dorman products, they seem to be the same quality as GM parts or better. The washers on the bottom of several of them are rusted so bad I can break pieces off by hand. On one the washer is so deteriorated that the bottom bushing fell off.

So I need to replace my cab mounts. I don't really want to go with polyurethane since I hear you get a lot of road noise with them. Dorman makes rubber ones that are cheaper then the GM ones. My question is, I'm not sure what I need to order because I can't find a diagram showing what the mount position numbers are for our trucks and that's how Dorman separates them. I'm assuming front to back of cab is 2-3-3 but not sure. Can anyone help me out with this? Thanks.

From what I have read about it, a dealer should be able to reprogram your BCM to change it.

Do you have any pics of the lanyard you're talking about? If you could do a XL black T shirt with just SilveradoSS.com across the front and nothing on the back I would get one.

Thanks for the reply, I actually ended up grabbing some of the exhaust repair tape and wrapped the connection in that first and then installed the clamp. It sealed up the connection under the transmission pan. I'm going to try it on the one behind the Passenger side cat today. If it doesn't work I'm going to try the RTV with a better clamp.

Has anyone else had issues with not being able to seal up the supplied mid pipe clamps? Any suggestions on different clamps, something im missing?

Sold.

It looks like TascaParts.com has one for $114.13. https://www.tascaparts.com/?p=catalog&mode=search&search_in=all&search_str=15912579

That would be great, the magnet broke off of my passenger side one. (I dropped the A pillar cover when removing it to redo my headliner) Yes, I still have my covers, I just broke the magnet off of the passenger side speaker.

Alright, let me know. Thanks.