Sssz28

What about a stock ss? Soon to be tuned with full bolt ons and used as a work truck, towing frequently/loaded with tools Always. Thanks.

**** lol Sent from my iPhone using Tapatalk

Turns out my warranty had like Three months left. Any suggestions on parts that I should buy personally and bring up there for them to install? Shops now under new ownership/management Sent from my iPhone using Tapatalk

CAn you send me some more pics I think I’ll take them Sent from my iPhone using Tapatalk

As of right now I’m going back and forth between performabuilt, FLT, and getting a reman from the stealership. So your here in Atlanta as well?? Sent from my iPhone using Tapatalk

1-2 are fine but 3-4 are gone. Any ideas on what went wrong? All started when trans lost fluid due to line popping on cooler. Worked and then stopped about 10 miles later or started slipping 3/4 Sent from my iPhone using Tapatalk

R they dot legal? Sent from my iPhone using Tapatalk

Well y’all, not even 75k miles and tranny rebuild is toast. At least 3-4 lockup will not grab anymore, although r-1,2 are just fine. This is my work truck and I do not have the time to do the 80swap. Should I go with flt this time? As I actually made it home instead brokedown on the side of the highway and 60 miles from home, in which I had no choice but to toe to a local shop. Lookin for opinions. Thanks! #teamnosleepfuxkinsucks Sent from my iPhone using Tapatalk

Ranchos 5000s Sent from my iPhone using Tapatalk Monroe coil overs, Monroe matics, Monroe oem spectrum. Sent from my iPhone using Tapatalk

Should be stock. Front with bumps only touching at one corner barely, 35.5-36” keys screwed in with only about a half inch left I’ll take pics, one second gotta drop this trailer and find flat pavement, I live in the Georgia mountains and have a gravel driveway rear sits at I wanna say about the same when shocks not blown Sent from my iPhone using Tapatalk

Please help. Have gone through at least 6 pair in the rear and 3-4 in the front. My truck sits 35”3/4 with my torsion keys turned in almost all the way, yet my bump stops only barely touch at the closest corner of the jounce to the arm. I’m loosing my mind and arthritis is going to make to loose... Sent from my iPhone using Tapatalk

Yo man you never responded back?? I’m ready to buy it if yuh still got it Sent from my iPhone using Tapatalk

Can someone please tell me the part number for the quick connect fittings??? Sent from my iPhone using Tapatalk

Make Auto Parts Manufacturing - SILVERADO 1500 03-07 GRILLE, Mesh, Plastic, Ptd-Blk, w/ Cntr Bar, SS Model, w/o Dale Earnhardt Pkg - GM1200557 https://www.amazon.com/dp/B01N0JXJ79/ref=cm_sw_r_cp_api_i_AVseBbRGBEJB5 Sent from my iPhone using Tapatalk

Buy a new one.. 2003 Silverado 1500 SS Driver Side Bottom Replacement Leather Seat Cover, Dark Gray https://www.amazon.com/dp/B00KNDRUDE/ref=cm_sw_r_cp_api_i_wTjdBbNN79DEW Sent from my iPhone using Tapatalk

How much to ship to 30062?? #1 pics? Sent from my iPhone using Tapatalk

Was about to say, my 03 SS with Bose sub/stereo had literally a punch out just left of the brake booster looking towards fire wall from under the hood. Anyone got a better hook up for a LOC ,THAN THE CENTER console. I need to be back thumpin, with only one needed... XFL1244, AB FOR life that’s for damn sure [emoji344][emoji344][emoji344]❤️[emoji97] Sent from my iPhone using Tapatalk

What cooler are you running on yours? What are you temps when towing? And how much weight? How’s the 2600 stall with towing? Sent from my iPhone using Tapatalk

??? So what all would I need also Sent from my iPhone using Tapatalk

I second this Sent from my iPhone using Tapatalk

Cable to electronic and not worth your troubles Sent from my iPhone using Tapatalk

Hit me up bud 7069820542

Doughty thanks man. Trust me Ive read every single one lol. Gear head at heart, shit at this point Im running out of post on this forum lmao. Just dont have the time nor tools to do something like that currently. Id need it back and done ASAP. Not like a month or so project while Im working. Cant remeber your user name but homie saying youd do it. You got insurance? I got a couple buddies that are master techs for several different manufactures but they never have time to do anything their always working and when not they deff dont wanna work more lol. Reason why I would never pursue a career in mechanics. Id need to get back as fast as the driveshaft shop gets the shafts done and time2kill has shipped me the new output for the front. Lemme know through id love to hear ya out. Second... thats why my f body z28 has an expired tag since 2012 (((((((......

NE GA in rabun county. I've never formally been taught auto mechanics, but I started working at age 12 at a small engine mechanic shop. I can do anything with a carberauted engine, but know nothing about ECU and wiring etc, etc. I started my own company st the beginning kf this year and have no time to trouble shoot/run into problems attempting to do it myself. I have another truck I use as a beater that I could get by with for a little bit. I currently have a built 65e but I've already had jt rebuilt once and warranty is coming up lol. It is built with " all the bullet proof tricks" ? but i tow up to 10,000 or more and I live in the mountains. Will say they that my truck outhandles my moms Subaru I bought her hands down!

Anyone know anybody who would like to get paid abd complete the swap for me??? Thanks!!