-
Posts
607 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by NipRing
-
What about the other plugs that were plugged in to the stock shifter linkage? And just leave the shifter pin floating under the dash? I’m gonna post a few pics of what I’m talking about but it’s limiting the file sizes and I’m doing this from my phone. ?
-
I have both stock shafts available.
-
4l80e Nvg-149 32 Spline Input Gear Adapter
NipRing replied to Time2Kill's topic in AWD, Differential, & Transmission Tech
I completely understand that people have busy lives. So I don't want anyone to read this as me being angry or upset. I am not. However, i have not heard from Time2Kill for 10 days now. I'm basically twiddling my thumbs wondering when my adapter is coming. Since I sent payment, none of my follow up messages have been answered. I know this sales thread is completely on the up and up. I'm not questioning it. I just have no idea whats going on with this part. And frankly, I need it asap. -
Can anyone tell me the part numbers for the stock high pressure power steering lines that go from the steering gear box to the pump? For an ‘03 please, thanks Sent from my iPhone using Tapatalk
-
4l80e Nvg-149 32 Spline Input Gear Adapter
NipRing replied to Time2Kill's topic in AWD, Differential, & Transmission Tech
When will this latest batch ship out? Thanks Sent from my iPhone using Tapatalk -
So was your stock 03 gearbox a 3 spline or 4? Because i'd like to order a redhead but i want to make sure they send me the right one.
-
Original NVG149 to 4L80E Input Shaft Adapter Group Buy! Cheapest P
NipRing replied to Time2Kill's topic in For Sale/ Wanted
pm sent- 56 replies
-
- nvg149 input gear
- 4l80e adapter
- (and 5 more)
-
I never found the right type of headrests. So used some stock non-embroidered one and had them custom done.
-
I have one full black front and rear kit and 10 red front and rear kits still available. When they're gone, they're gone.... Text me at 262-271-5858
-
Custom Fiberglass Silverado SS roll pans Updated 11-17-19
NipRing replied to dkkustoms's topic in For Sale/ Wanted
Mine finalized in July. It was a shitty roller coaster I never want to be on again, that's for sure. I hope things finish up soon for you, man. Then you can finally get in with life. Good luck! Sent from my iPhone using Tapatalk Sent from my iPhone using Tapatalk -
My submission Sent from my iPhone using Tapatalk
-
Custom Fiberglass Silverado SS roll pans Updated 11-17-19
NipRing replied to dkkustoms's topic in For Sale/ Wanted
Did your divorce go through? Sent from my iPhone using Tapatalk -
SSS is getting a heart transplant. In the mean time, new beater...lol
NipRing replied to NipRing's topic in My New Truck
Till the trans shits out, lol Sent from my iPhone using Tapatalk -
SSS is getting a heart transplant. In the mean time, new beater...lol
NipRing replied to NipRing's topic in My New Truck
Sent from my iPhone using Tapatalk -
SSS is getting a heart transplant. In the mean time, new beater...lol
NipRing replied to NipRing's topic in My New Truck
Yeah, the tails and the wheels gotta go. As far as my new 6.0 goes.. A break down of what's done. Block cleaned and Deburred / Stress relieved Align Honed with ARP Main Studsa Diamond stone Cylinder Honed with torque plates and k finished. Decked with CBN cutter. Crank Checked for straightness Rotating assembly balanced Engine block and components blueprinted and assembled. Parts are K1 crank with ARP Pro main studs Engine pro Main Bearings King Rod bearings Durabond cam bearings K1 H beam 6.125 connecting rods with ARP 2000 bolts Wiseco pistons with GFX steel top and Napier second ring pack. Tool steel wrist pins. BTR stage II turbo camshaft Elite timing set. ARP Main and Head Studs Sent from my iPhone using Tapatalk -
Hate to be lazy, but PT.net has more members and I'm doing this in my phone. Here's a link to my sale thread. Thanks http://www.performancetrucks.net/forums/showthread.php?t=545876&page=1 Sent from my iPhone using Tapatalk
-
Nothing yet? Damn, I really wanted these to happen [emoji53] Sent from my iPhone using Tapatalk
-
Hard to pass on deals. Stupid credit cards make it so easy!! Lol!
-
Well, now it looks like I'm going with a turbo, so this whole exhaust is going to be up for sale soon. 1-7/8" ARH headers ( 1 year in the truck, I paid $1400), I did cut their mid pipes to make them work with the Speed Engineering mid pipes, no cats. Speed Engineering true dual 3" exhaust (I paid $425) on the truck for about a month now. I also have the volant intake with the ram air tube (I paid $350) on the truck for about 2.5 years. I'd like to sell it all for $1500+shipping. Anyone interested? Sent from my iPhone using Tapatalk
-
Heads are gone. Everything else is still available. Sent from my iPhone using Tapatalk
-
I'm running my front with djm upper and lower control arms. I heard they only have problems with drop spindles. And a rear kit is 1700, but will not clear 18" wheels. Sent from my iPhone using Tapatalk
-
Ok, this is taking too long. I'm spending the $$ on a turbo kit. But I still hope these wheels become reality. Sent from my iPhone using Tapatalk