Coolbreeze1942

Found out the problem. I had aftermarket red needles. I still had the factory needles so I switched them. And whalha!!

1 pic

Yes they lit up fine. My thinking is that since I switched to the flat top led lights that the light is more in a direct beam instead of a globe wide beam. So then the light doesn't make it directly to the needles. Maybe???

I know These pictures are during the day but I'll upload more tonight.

Hey guys i need some help with my gauge cluster. I did the LED conversion and all the lights look great, except one problem has occurred. With these new LED's installed for some reason my needles don't illuminate anymore and i cant see them at all at night! Ive added about 8 extra LED's throughout the cluster and its bright as hell, but the needles don't show up. Any ideas or solutions? Thanks guys. ill try to get a picture on here

Ya i dont want my ss to burst into flames randomly like a pickup we had to put out last shift. the dude was driving down the road and it spontaneously combusted in the engine bay.

Dang i now feel like a big baffoon! After i tore my truck apart, i decided to check the fuses again just to be sure. Sure enough, it was a fuse! Ugh! thanks for the help guys. At least i now know a little more about my ride.

Thanks for the help guys. I did a little bit of digging around and found at least one of the door blend actuators was not working. i do get hot air out of my driver side when i manually switch the door blend. However the passenger side still is blowing cold air. But what are the odds that both of the actuators would go out at the same time? not to mention how i cant switch the air to the floor or to the windshield defrost. Possibly a relay of some kind? And yes Jonny the name now fits hahaha. Thanks for the help as always

So this winter I went to turn my heater on after the pickup got warmed up and nothing but cold air came out. I've got plenty of antifreeze and I felt both lines on my heater core. They are both warm and the same temperature. I've also noticed that when I switch the heater to defrost, it doesn't switch. It only blows out the front. Not even the feet. Also the recirc. Doesn't keep fresh air from staying out. Plz help me. Diagram might be nice too. Thanks for your support

I would like a set of these bad ass light, but it says I am restricted from the members section, so I can't pm anyone. How can I get a set?

ill take the headlight covers if you still have them

Can't decide which kit to get. Are the djm a arms safe to use for the front without causing other problems with say... Cv joints? And how bout that belltech kit. Can the kit be used to get a 3 inch drop in the front instead of just 2.

Alright cool thanks!! any advice on the install? pretty hard or should i just have a pro install it?

Hey guys, I'm new with the Sss and see a lot of people doing the belltech 3/4 drop with the street performance shocks. But on their website it shows they only offer a 2/2 drop. Could anyone help me with the exact product number for the 3/4 kit with street shocks? And I have the 22" tbss black wheels with nitto 285/45/22 tires coming. Thanks so much guys. I'll post pics of the ride when I get in all my toys! Hehe