Airborneninja

I forgot to add 'I know this thread is old.' I'm still glad the tip exists here though.

I love this stuff. Thanks man. I've never done this trick either. Jacking up the trans is a great way to do it. I've never had the option of removing the torx bolts up top either. They've always been so corroded I couldn't even tell what they were. Cleveland snow and salt. Never had a brand new truck either. I checked the trans area on the SS out the other night, and everything looks amazing under there, but I reached up on the shifter bracket and those torx bolt heads are just little piles of rust. I thought for sure this would be the one I don't have to bend and cuss at for a half hour. Lol It actually looks like there's enough clearance to get the pan off without even bending the bracket though, so maybe I'll luck out like some others have.

Please close the thread then, so I can stop having to defend myself against swearing, name calling 'veterans'. Trust me, I will NEVER post here again. I have a life, and I can't believe I've sat here and argued with little worms hiding behind computers calling me names. Every helpful thing I get from this site was from years ago anyway. When positive people with mechanical ability, and writing ability made the posts, like that Mr. P. I will keep coming back to read that stuff. But this .... you guys can have it. Goodbye. I could've really helped some people, I've already tried if you see my history.

Name calling, swearing, and personal disrespect from 'veteran' members of this site like idahoBLKss are what's ruining it. Not literate, helpful new members with fresh ideas. I didn't realize I was a dumba$$, drunken pothead. I thought I was a disabled combat veteran trying to start a new life with a 136 IQ and a college education that hasn't touched drugs or had a drink in 3 goddamn years, that likes to work on trucks and help people. Thanks for the helpful wisdom, 'veteran'! It's your hypocrisy toward new members that is ruining this site. I hope someone reads this thread in the future and sees how hypocritical you've been. I see you have a Zippy tune. Why don't you ask Zippy about his HP output or his C5 pan recommendations? Oh, that's right. You're an idiot. He says it's a no brainer. You probably have it on your truck and forgot, and now you're arguing the wrong point. That wouldn't surprise me, judging from your literacy.

Illiteracy strikes again, dummy. I never said that. But yea, I bet it's definitely close to 25% more than what my coworkers stock 2000 Corvette with a 4 speed is acually putting out. You're not over 431? If not, why? Oh that's right, you're an idiot. you probably are over 431, you're just arguing the wtrong side. Like a typical idiot.

You don't get it. You must be illiterate or stupid if I'm drunk or high. Don't get personal with me, Internet Rambo. Learn to read. I know our trucks are heavier than a Corvette. When did I say they're not, Captain Obvious? Most of us here also have WELL over 25% more HP than 345. And I'm pretty sure I said same driver, so whatever the outcome, no one is stomping me. Illiteracy and assumptions are a serious problem in this country. Transmission pans are not. Get your priorities straight.

Sure. I also posted pics to make it easier to see how I measured. It's 4 inches total depth, pan with sump. The sump itself hangs 1 1/2 inches below the rest of the pan. The benefits of the sump are not extra fluid or cooling, just added fluid collection and suction.

Thank you.

Next best thing since sliced bread? I stated facts. Those are just facts about what it does, and I explained that to you on the other thread days ago. The first thing I said was EXACTLY what it does, and that it is probably overkill. Then you jumped on here and immediately said it's "pointless", and disregarded it because it's not a cooler. Read my previous post for some more facts on our "farm trucks" versus a Corvette. My farm truck seems to need this pan worse than the vaunted corvette does. I never said just cause something came on a "corvette" its gonna be awesome for our trucks. I sure don't want Goodyear Eagles on my truck. Or a rag top. Or RWD. You originally said it was a pointless mod and a waste of money, but I'm glad you now see what I'm getting at. Just trying to share this with guys here who have been helpful. I'm not claiming it can do anything that it is not intended for. It is not for cooling, it is for exactly what I stated it is for. And now there is further evidence from highly respected members of this site who have actually already done this, and say it is a great upgrade. Interesting. And then you're going to harp on an 's' being added to the word 'servo'? Laugh out loud at that last grasp. That's all you got left, huh. No hard feelings though from me, you helped me research this mod even more and realize that our trucks need it more than the car it was installed on. The more I read about it, the more I justify it's installation.

No, the guys in the thread I just posted are helping people. This here is nothing but negativity and false claims. I will not be discredited by someone who does not even understand what's going on. Why didn't he discredit all those members like Zippy back in 07, when they made accurate statements as to the purpose and benefit of this pan, just like I TRIED to do here? You wouldn't race a stock c5 vette through curves??!! It's not crack, buddy it's called confidence. I would put money on my truck (with new tires) against one anytime anywhere. Here are some facts for you.... 'Buyers could purchase the C5 Corvette with a four-speed automatic or six-speed manual transmission. Both drivetrains could achieve 345 horsepower at 5,600 rpm and 350 lb-ft. of torque at 4,400 rpm. In performance, "Motor Trend" reports that the LS1 could accelerate from 0 to 60 mph in 4.8 seconds, hit 109.3 mph in the quarter-mile in 13.2 seconds and reach a top speed of 173.9 mph.' You see that guys? The angelic C5 Corvette has MATCHING HORSEPOWER and LESS TORQUE than a STOCK Silverado SS. And the 1/4 mile times are easily achievable too (and that's a straight line, not curves). How could a built awd SSS NOT beat a stock, REAR WHEEL DRIVE c5 Corvette in a road race? Fact is, it will. All day. And with just a few hundred bucks added to a stock SSS, it would beat that vette in ANY race, ANYwhere, ANYtime. And that stock vette, which is slower AND corners worse than my truck, comes with this pan on it straight from Chevrolet, to prevent the trans filter sucking air on launches and curves....... Ummm, my truck launches faster, AND handles curves faster than a stock c5, so to me and several other respected members of this site, this UPGRADE is a no brainer. To others, it seems to be on par with a throttle body spacer for some reason. But again, my faith and trust is in Zippy, Krambo, Mr. P, and GM Performance over someone who doesn't even own the vehicle this pan is for, ANYDAY. Yea, I think I'll trust the Corvette engineers at GM Performance, thanks. If they deemed this pan necessary on a car that doesn't even need it as badly as my truck, then my truck definitely needs it now. Again for clarity.... If you race two equal drivers on a road course, one in a less powerful, slower RWD car, and one in an AWD truck which also has more power and torque, who do you think is going to win 9 out of 10 times?! Probably 10 out of 10 actually. A stock c5 Corvette, even a Z06 with a 6 speed, is not even a threat to one of our built trucks on a road course, or even in the 1/4 mile if you spend a few hundred dollars on your stock SSS. I suppose you're intimidated by Ford Raptors too. Our trucks will leave a stock Raptor choking on exhaust fumes. I do it all the time here in Ford country. I'd even race one of those ugly things in dirt and sand, with mild upgrades and tires on my truck. And beat that Ford again for a 1/4 of the price.... then swap tires and beat a vette on a road course... then tow the vette home!!! Thanks again everyone who posted here, even to the negative posts about this hidden gem. I am more convinced now than ever that I NEED this pan put on my truck. You all can read the FACTS and make your own decisions.

You're right. Zippy and Krambo too, it seems. Look what I found... http://www.silveradoss.com/forums/topic/36531-deep-transmission-pan/?hl=24208593&do=findComment&comment=427369 Hmm, interesting UPGRADE idea there, and coming from 'veteran' members with tens of thousands of posts, six years ago! Very nice read, thank you Sprayed99. I rest my case. I respect the opinions of Zippy over someone who polished their water pump and tells me I'm wasting money any day. They all loved the C5 Corvette pan and recommend it to everyone. HA! Thanks again, Sprayed99. It took awhile, but I found that thread by searching the part # of the pan.

Any idea how to find the video? I searched Youtube and didn't see it.

Are the stock manifold gaskets really the best? I was wondering about this recently because I'm planning on LT headers for my SS soon too. Also my 03 Yukon XL sounds like a diesel when you first start it, until the manifold gaskets heat up and expand a little. I kinda get a kick out of it, but if I changed them out, stock is good?

I didn't realize jumping out of planes taught you how to work on a truck? I missed the part where I claimed that. US Army Airborne Jumpmasters taught me to jump out of planes. I taught myself to work on a truck. He's not saying "you are dumb for this" he's simply saying money is better spent elsewhere if money is an issue. Everyone is over reacting today holy f. Yes smoke will work just don't use your wiper blades. Lol. My wiper blades spray plasti dip instead of washer fluid, so it's all good.

Thanks for the tip, I'm new at this. Can I do my windshield? I see they have a 'smoke' color I should try. Aah screw it, black always looks better.