Jump to content

RU18YET

Member
  • Posts

    87
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by RU18YET

  1. http://youtu.be/eCqcysRjBIQ Mods are in description
  2. Need some cam advice. Details are as follows: 2004 awd silverado ss 5400lb Built 65e Yank 3600 stall 4.10s Full bolt ons 100 shot plate system Stock Lq9 Tbss intake manifold w/ 90mm tb Soon to have Ported 243s and a cam I got a great deal on the Texas speed 233/239 cam. I know this cam is big for a truck, my question is it too big? On spray my converter flashes to about 5k rpm and around 4k off the spray. Cam card is in the pic. Thanks for your help.
  3. Door sills to 70448? If willing to seperate I only need the passenger side
  4. i had REP mode problems and switched to a ls2 car style throttle body from a tbss and haven't had problems since.
  5. Interested in instrument cluster bezel (big plastic piece surrounding the whole dash) and front drivers seat. paypal ready
  6. It's made by nitrous outlet. I have it and have had no issues with the kit. Works great. I'd also go with a wet kit over dry. I plan to by a plate when I move to a 150 shot but if our running 100 or less I'd just keep the nozzle. Works fine for me
  7. Will the rest of the drivetrain hold up to my mods and 100 shot out of the hole? Built trans and 3200 yank ss stall.
  8. Im going to get a yank ss 3200 and a built trans at the same time with a 40k cooler I love it! its there when i need/want it and other times its a bolt on truck nope, i spray at 3000rpm (20mph) just to be safe with the wet kit. Since then i have made a 2.1 60' but that was a NA pass. When i ran the 13.6 @ 105 it was my first ever pass on a track. My buddy tuned it. Its not the tuners fault, but timing was retarded by 4 degrees for the spray so it revs a little more sluggish. It was my first pass ever on a track and i didn't know that with a stock converter you get the best 60' by just stomping it off the line instead of holding the brake and gas.. I just installed the TBSS Intake and ported TB! It made a pretty noticeable difference. Cant wait to go get some more NA and N2O times at the track
  9. I didn't take any pics but just disconnect all pcv lines, Map sensor and unbolt Evap purge. Then disconnect fuel line and its a straight swap. Just have to figure out something with the Evap purge solenoid. I used stock one
  10. Nope. I'm the only SSS around here
  11. Yes my tune has been adjusted and my tuner tried to fix what it was doing and we thought we got it (because the truck warmed up) but I started it a few hours later and pulled out on the highway and stomped it and straight to REP mode. Idk what version. It doesn't say on the module but I just bought it last week brand new. So ima guess v3 or the newest version
  12. I just did the tbss swap last night and everything is fine except for the x link. It throws a p2135 code at wot. I can drive all day long with no problems until I stomp it. And it's also not every time I stomp it, usually around start up and while the truck is warming up. After its warm (20-30min of driving) it doesn't throw the code. Atleast it didn't last night. I can get it to trip the code without the truck running. Just with the key on and mash the pedal to WOT for a few seconds and it goes into REP mode before it even starts. Btw it's a tbss 87mm TB. The throttle body works fine. I put it on a new 2011 gmc which already have the 6 pin harness and it worked flawlessly. My truck never had problems with any throttle body codes until after the swap. I might have just got a bad xlink.. Any help would be great
  13. General. I just used the stock Evap purge and got 3/8" tubing from Home Depot to avoid any problems but I have an x link problem but when it does throw the code it runs great! Definitely a noticeable gain!! Hopefully I can get the xlink problem worked out
  14. Ok well ill just try not to drive it much and ill let you know what happens after the other 3 are installed
  15. Seems like the Evap line your talking about. Go to oreilys and get an inline Evap and it connects to the stock line (back towards firewall) and run the other end to the passenger side of the intake by the throttle body.
  16. Yes it started after the new tire which makes me think that's the cause. The 3 new tires are on order and will be installed the middle of next week. I will try not to run it much. Would it be better to have the slightly larger tire on the front instead of the back?
  17. Alright. Ill get the 3 tires soon and let y'all know if the rough feel goes away
  18. I ported just the throttle body. I didn't want to risk ruining the structural strength of the intake because of the horror stories about the ported tbss intakes. Install however isn't hard. Just don't drop anything into the heads. Just take your time and its not bad at all. This is the plug and play version. http://www.racetronix.biz/itemdesc.asp?ic=IA%2DM2U&eq=&Tp= I used the splice version for half price. http://www.racetronix.biz/itemdesc.asp?ic=ICAU8&eq=&Tp=
  19. I just recently got a flat on my front left tire and I bought one new tire because it was unfixable. I will buy 3 new tires once I get paid. I got the tire mounted and balanced and then rotated the front to the back and the back to the front. The other three tires have maybe 30% tread left. After I got them rotated I noticed a rough feel in my steering wheel. Not a shake but just feels rough when driving. It gets a little worse on the interstate. I am wondering if the tires that are now on the front would cause this because of possible uneven tread wear or just worn? I jacked up the front and there is no play in the wheel bearings. Any advice would be awesome. Thanks
  20. I cant wait to get a stall after racing this guy. His TBSS runs 11.8s @111 but he has a 1.6 60' compared to my crappy 2.3 60'
  21. We need a sticky for this! lol. If your truck is a 2003 you HAVE to convert your fuel system to a returnless setup using the corvette fuel filter if you use the TBSS/NNBS fuel rail. 04+ trucks all have the return-less fuel system already. You WILL need to modify your stock crossover on your fuel rail or use the TBSS/NNBS rail. I was fortunate enough to know a friend with a TBSS and got the TB, Intake, Fuel Rail, and Injectors(30#) from his TBSS for $100 which was a steal. Then you WILL need an X-Link adapter, there is no way around it, $227 after paypal fees. If you use the TBSS injectors you will need injector adapters. mini delphi to ev6. Your stock injectors will work on the TBSS/NNBS fuel rail. You can purchase the evap at o reilys for $15. There is no difference between the NNBS and TBSS intake. The Newer(09+) NNBS truck have a different style throttle body but all TBSS and NNBS throttle bodies are 87mm. I ported mine and will let yall know the gains of the swap after its installed and retuned which will probably be this weekend. recap: (03 only) corvette fuel filter $40 TBSS TB andTBSS Intake $200ish X-Link $227 Evap $15 retune any other questions just ask
  22. Is the stall sold? If not Im Interested
  23. I am going to run ls2 injectors and I am getting pigtails. The pig tails I am getting are just black and red wires. I am wondering what wires on our factory harness are positive and negative?
  24. Interested in x link. torque rush is sold out..
×
×
  • Create New...