03SSBoy
-
Posts
1,199 -
Joined
-
Last visited
-
Days Won
23
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 03SSBoy
-
-
Yea from what I see it looks like you can bend it at that spot and it’ll be spot on
-
You can probably find it on the SS Clone Parts for sale trade on Facebook. Maybe even the thieves themselves.
-
AWD or RWD?
-
Retune yes most definitely.
Glenns auto performance has a whole kit for the tranny cooler with braided lines.
Aftermarket Crossmember should be fine
-
You’re better off swapping to a 4 bolt tb and running an xlink. It’s plug and play
-
Well that’s pretty annoying lmfao
-
Check for anything on the swaybar. I broke an end link one time and would hear clunking. Or it could be a cv axle
-
2” bell tech spindles
2” shackles
2” hangers
shocks
-
Joe devito at devito racing compound
-
Fenders are the same but inspect them really well if you’re going to grab them from the junkyard. Beds are also the same just has to be 6.5ft. Just don’t throw anything away from the old stuff to see where you have to install rivets for the cladding. Your tough part is going to be someone willing to do the rockers. I sold my old ss because no shop around me wanted to do it
-
1
-
-
Had this issue a lot and I changed both throttle body and accelerator pedal and never had the issue again
-
1
-
-
PM Sent
-
In the heating element itself it’s common
-
Would have been nice for GM to have a lot of options for these trucks 😂 but no typical gm making us suffer
-
-
I was at a 5/7 drop and I had 285/35 on the 22s. I’d rub in the back so I rolled the bed sides and I’d destroy the top of the front wheel wells. But I feel like anything smaller than that tire size you’re risk for a wheel getting damaged a lot easier on potholes.
-
What model is it? If it’s the mp112 then it’s a decent trade I think.
-
Never had an issue. Depends on the tire you have. Only problem I had was the inner wheel pitting but I live in the Midwest so it’s typical because of the salt
-
2003-2005 came with awd and 4.10s
2003-2004 all came with center console in front
There are very few SS that were AWD with a front bench seat in 2005
i think your best bet is just finding a regular awd ss and replacing that console with a jump seat.
-
Shopman did his last batch a few months ago. I’d ask on Facebook silveradoss.com page to see if anyone has any
-
Put oil in it lol
-
Lmk when you get some intimidator badges
-
1. If it’s stock then AC Delco
2. As in brand or size?
3. 305/40 will rub on 3/4 drop
4. Honestly don’t know but it’ll be kind of hard cause IMO it’s hideous
-
He doesn’t have a transfer case
New Shopman1 SS Bowties in about 2 weeks
in For Sale/ Wanted
Posted
No this was his last batch