ls2silvy

know some 4wd 1500 guys in the mid 9's with just sleevs over the stock tie rods.... I've run consistant 11 and 10 second passes on my stock stuff with no issues in 4WD......

Having some serious issues with my bone stock 03' SSS DD, bought the truck in New Mexico with a damaged T-case for cheap and trailered it home, went through T-case and replaced all damaged pieces including rear case half, planetary assy, and all seals... filled with Auto track and test drove, T-case had severe popping sound under load. Removed t-case and took it to a good friend that specializes in T-case and manual trans overhaul, found that drive chain was stretched and and skipping over drive gears. Had my friend replace drive chain and he insisted on viscous coupling replacement as well, only way he would warranty his work. Re-installed t-case again, drives perfect now when cold and on short drives but as soon as t-case warms up from an extend drive or any highway driving it binds up severly in tight "parking maneuvers"... no binding in staright line what so ever though. Removed t-case once again and had my guy replace new viscous with another new viscous, re-installed and still having the same issue. Very tired of removing and installing this t-case and running out of ideas... looking for some input or advice!!! possible that the rear gov-lock is staying locked and causing this????

pm sent

pm'd you

still in need! bump!

pm sent BlownFogger540

bump!!! parts still needed

Looking for good used RH front door cladding, both LH bed claddings and a good rear bumper, any color, also need 05 and up lower SS bumper vent insert set (all three)..... Let me know what you have! Thanks!

it was a car show in atwood Kansas called "The Early Rod Run" they take us out to a air strip to drag race for a couple hours, its a lot of fun, no times provided though lol, they have a cop at the end with a radar gun... guess I had the second fastest mph, only a modded ZR1 beat my mph do it every year, its a lot of fun! They are 20" torque thrust ST's in the gray finish, made by American racing working on it man, just need to finish the meth kit install and turn the boost up to 15 psi.... if i'm getting kicked out of the track i'm going to make sure its ready to go all out lol

Looking real good man, love the turbo placement!

Looks good man!

Hey bud, I do have more pics, it's a DBrods fuel cell with a Magnafuel Pro Tuner 750 pump, -10 feed, -8 return, Aero A1000 regulator... You fill it in the bed just in front of the tailgate.

There ya go lol, thanks man! Thanks man, It has a 2/4 drop now and im not going any lower, to hard on the front axles, stock brakes work pretty good and i've had no issues so far, i do have plans to install C6 Z06 brakes at some point though! Thanks man!