VHslow

No longer for sale.

Are the TBSS injectors bigger than the LQ9 injectors, I did my intake and TB swap awhile back but used my stock injectors because I didnt feel like swapping connectors on my harness. I keep getting a code for system too lean both banks. Also does anyone happen to know the gm part # for the connectors I will need to install the TBSS injectors

Thanks for all the imput guys, I"m leaning towards EFI live because I plan on putting Efans on.

Well since I can't find a local tuner I'm gonna break down and buy either HP tuner or EFI live, just wondering if anyone uses either of these and what your thoughts are on them, EFI live cost a little more but if its better or easier to use than it's worth it to me.

Thanks for the info, That sucks the nearist tuner is 4hrs away.

Well the codes went away some how. but now whenever I give it full throttle it cuts out and goes to reduced engine power and throws a p2101 code. does anyone have a dr. X link adapter or had this problem?

Try TBSSowners.com, I just bought a complete intake and TB off that site, several guys had stock TB's for sale, just ask in the wanted section.

Well a few weeks ago I had a nitrous backfire and messed up my intake and throttle body, I started getting a TPS, IAC, and a few other codes every time I would start the truck, If I cleared the codes with my scanner before I started it they never came back on until I shut the truck off. So I was told all these codes were from a bad throttle body, So I just put on a TBSS intake and throttle body with the X link, And I still have the same codes, And again I can clear them before I start the truck and they don't show back up and the truck runs fine. Any ideas?

Thanks for all the compliments guys, It's not quit the way I want it but it's gettin there, I would have posted the vid of it on the bottle but due to a nitrous backfire it's kinda missing a few pieces of the intake, The TBSS intake and TB will be on this weekend.

This video was in colorado at 5000ft. N/A, It's slow and yes I know it looks like a Z71, 3/5 and 20's are on the way along with a TBSS intake and 243's.

Thanks

What size injectors came in the LQ9?

Well today I started my long list of projects on the VHO, After talking with a few diffrent people I decided not to pull the heads off and get them milled, I was able to get the broken header bolts out with a right angle drill and left handed bits, And man was it a pain... The passenger side took about an hour or less I had the front wheels off and pulled the inner fenders out so it wasn't too bad, As far as the drivers side go's it took about 2-3 hours but I finally got it.