midnight04

I can do $3,800.00 Installed.

Thanks! I have been Wicked slamed! Kind of slowing down now and I have time to surf!!! lol

More picks

SOLD

Thats what im sayn...lol

I have sold this setup as of this morning in town, but will be having a nother just like it in a couple of weeks. Im sorry Bro....Why cant you pm? SOLD!!!!!

Thank's man.

Bolts (Im Done)

PICKS of the bolts

MORE PICKS

LS2 With LS3 Head's And Intake I am letting go of my LS2, It is fully built and ready to go, I think I'm going to pick up A 6.2L LS3 Block and stroke that. My LS2 has the following: USED LS2 Block with under 15,000 miles on it USED LS2 CAM under 5k on it. NEW ARP Head studs, New Oil Pump New Timing Chain Set up, NEW Lunati Forged Crank Stock Stroke 24X NEW LS2 Rods NEW LS2 Pistons NEW LS2 Lifters, And Trays New LS2 Valley Cover With Vent NEW LS3 HEADS With .570L Springs, Stock Rockers & Push rods Milled 12T NEW LS3 Intake With Rails And Injectors NEW LS3 DBW Throttle Body Used L92 Truck Pan With Pickup and Windage Used Front and rear covers. Used Crank Sensor, Used Cam Sensor ASKING $3,800.00 Plus Shipping!Here are some picks of the Crank being installed, Ill get more Picks as I find them It was Finished a couple of months ago. We all know I build on the side, so you can rest assured this one was built for me to go in my drifter, It is stout. You can run the LS2 24X reluctor engine with a stock Vortec or LS1 harness and a simple cam adaptor harness and knock harness adaptor. Easy butter cheesy.. All covers are Powder RED And All bolts are Stud or Allen.

MORE PICKS

F/S NEW LS2 6.0L Crate Engine (It has the LS2 Pan on it I can put a truck pan on if you want) I have a NEW LS2 6.0L GTO Crate Engine up for sale. Includes the Controller Kit And The Surp Drive SYS, I got this engine at A GMPP auction and was told it was in the Chevy Dealer Parts Department for a while when the parts guys robed the Water pump (I do have A New Pump For It) and exhaust manifolds from it. To sell them to a customer "Who Was In Dire Need Of Them", and they were going to order new but never did. And once they take off parts they cant sell it as new. I don't know how true that is, but I did have the engine gone over by my machine shop from top to bottom. They found that the engine has not been fired and it is in Brand Spanking new condition. The Engine has 243 heads with Hollow stem Intake valves and sodium filled Exhaust valves rated at 400hp. the part # is 19156261 I'm asking 5,900.00 Plus Shipping for it, With The Controllers and Drive Kit. No Warranty due to the nature of the engine and its purpose lol Pay Rip You Off Fees Or Pay Pal Fees Are Extra. CONTROLER KIT Includes Computer, Harness, 02 Sensors, all the crap to run your New LS2. SERP DRIVE SYS Fits LS2 and LS7 engines Deluxe kit includes all the components and hardware necessary to install on an engine with air conditioning, including alternator, power steering pump and idler bracket, (belt included) The system includes: 12579229 Belt (water pump, alternator, and power steering) 12585476 Belt (A/C compressor, LS7) 12569301 Tensioner Assembly 12595289 A/C/ Belt Tensioner Assembly 12568996 Idler Pulley 88958093 A/C Compressor 12569286 A/C Compressor Bracket 15261472 Power Steering Pump (reman) 26046502 Power Steering Reservoir 12578067 Alternator and Power Steering Pump Bracket 12555693 Power Steering Pump Brace 12568997 Power Steering Pump Pulley 15841234 Alternator 12579228 Belt(A/C compressor, LS2)

The Best I can Do!!!! PRICES: AS-Cast= $750.00 + shipping Ported= $900.00 + shipping 8 new off set rockers and bases= $80.00+ shipping New L92 intake will fit these heads = $190.00+shipping Please feel free to contact me on the intakes if interested. These heads will fit any LS/Vortec based block with a 4" or larger bore. Thanks' Michael 623-204-8828

GMPP list's the chambers at 68cc but I have found them to be 69 to 70cc I can have them milled to what ever for $80.00. They do flow like crazy the As-Cast heads flow in the 320's out of the box. The ported ones keep pulling up in to the .800 Lift (range that is whare we stoped testing and we were in the 400's) I have a set on my Z and they are producing over 626whp, granted they are on a 427ci stroker but none the less we dynode over 850hp(crank) using methanol and a carb for our dirt late model. They are wicked heads! Thanks' for the question Michael Here are a couple more shots of the intake ports on the ported ones.