Jump to content

Brangus

Member
  • Posts

    33
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Brangus

  1. I think I have it figured out now. Yes, it will need to be an aftermarket. Thanks for the reply
  2. Market has tons of SS bumper covers but I can't find a source for the discontinued Genuine GM 89045660 Bar Asm, Front Bumper Imp. for my 2003 Silverado SS
  3. Did you ever determine the solution to your problem? Mine's acting up the same way.
  4. Yeah, it worked very well without any issues whatsoever. BTW I changed out both the lower and upper balls joints and hub bearing while I had it apart. I used the 16" TC6R Big Brake Truck Front Brake Kit with the Beltech 2" . I have a little bit of tire rub at full right and full left and would love to hear if anyone has come up with a solution. It appears the fender wells are lined with plastic, so I wonder if the material could be sucked up a little tighter.
  5. The box arrived in one piece and looks good. I appreciate your support and efforts to get this thing shipped. Thank you!
  6. I have now have big brakes and my will spare no longer fit. I need a 20 inch wheel to work, SS preferred. Center cap not needed.
  7. Sorry, my sense of humor is low threshold regarding this box. I've had both GM parts guys and Salvage yards tell me they have one and when it's time to place the order they end up not having it. If you can get a shipping quote for $150, I'll take it and pay you $300 for the box. So we're looking at a max of $450. I can do paypal.
  8. Wow, just like that? Maybe you missed the part where I said, I'd pay for shipping. Thanks Bro, but I'm pretty sure I'm not driving to Canada for a $300 box.
  9. That's great! The box from GM was listed at $315. If you can ship it, which I'll pay the additional cost, I'll offer $275. I've had pretty good luck with going into a UPS store with oversize items and saying, "I need this shipped" and they usually figure it out. But it aint free and I get that. So let me know, I can do PayPal. Thanks man.
  10. The truck would have to be perfect to get that kind of coin.
  11. I just took receipt of a 2003 SSS with less than 36K miles (100% stock) to replace my 04 that was stolen while serving in Afghanistan. Insurance only paid $12,700 so I had to pony up a few more bucks. So now I'm vigorously throwing all the previous upgrades at it. Installed the CORSA yesterday in my driveway, that was dumb, had to break out the saws-all. Should've gone to the hobby shop on base. Retrax gets here today, easy install. I had the Z06 brake mod on the '04 but I understand Rudy's no longer making the brackets, so I'm looking at the Wilwood 16" brakes. I still have the Belltech 2/2 spindle kit in boxes that never got installed so I'll take a chance and see if it'll work with the Wilwoods. Oh yeah and just replaced the original tires with brand new Eagle LS-2. Yes, the truck still had the original Eagle LS tires, so the center caps hadn't been dicked with and are mint. Last thing... I had the Revelco anti theft device installed, so nobody's taking this truck.
  12. This is a great, idiot proof alternative to the diode fix. Highly recommended!
  13. Looking for the rear seat storage box with the hinged lid and latch. Part number is GM-12498846. It's been discontinued, need a used one.
  14. Has anyone upgraded to the Wilwood 16" (140-8992) brakes with a Beltech 2/2 Spindle drop kit? The Wilwood tech support guy is telling me not to do it. In my mind if the drop spindle will work with the OEM calipers, then the holes are spaced correctly and the offset should be good, so why wouldn’t the Wilwood brackets work? Has anyone pulled this off?
  15. I know this post is a couple years old... are these brakes kits still available?
  16. Is it possible to blend the fiberglass with the plastic cladding? Is it advisable? Add me to your contact list when you make another production run.
  17. Will do. It's going to be a couple of weeks though. I just ordered the Belltech 2" drop kit and since I'll have to disassemble everything up front I will be doing the brake line swap then. I'm pretty sure I'm just going to make my own using Russell fittings and braided hose.
  18. I get the same overhang as everyone else, the fix would be for Baer or someone else to manufacture a rotor 1/2 larger, or drill the brackets so they are a 1/4 closer to the center. I think there's room to do that. Don't get me wrong, I'm not faulting Rudy's brackets. They certainly make the installation idiot proof. Overall, I'm very satisfied. Need to find replacement brake lines.
  19. All done! For those of you thinking of doing this upgrade, I highly recommend it. Rudy, all I can say is, PERFECTO! The brackets worked flawlessly, The calipers were dead-on center. The only issue I had was with both front and rear flexible brake lines. They simply aren't compatible with the port location on the new calipers. The front lines had to be attached by turning the block 180 degrees around and away from the original routing, thus taking up original slack built-in to allow full left-right steering range. I had to remove the brake line from the bracket on top of the spindle and remove the bolt from the bracket holding the brake line at the top of the A frame. As a temp fix, the lines are anchored with wires ties. The rear brake lines have a straight 2" line (stainless- aluminum?) that when installed, blocks the upper caliper mounting bolt... so you must attach the caliper first, torque it and then attach the brake line. When you do this you can't put the 33 ft lb torque on the banjo bolt. I tightened the bolt until it stopped dripping and then gave it another 1/4 turn. Now there is no way to re-torque the calipers later unless you remove the brake line, which would required new crush washers. Ass pain. Even though I was able to make them work, I need to replace them with a braided hose. Any ideas?
  20. Doing this conversion today. For the caliper pins, is there a torque specification, do they go all the way down until they bottom out, locktight? This is probably obvious for most but I have to ask. Thanks
  21. Yup, the lights go out as advertised. Actually it hasn't occured since I changed the battery. Seems to have gone away. Weird.
  22. Thanks for the quick reply. Bummer though, I need to find a new installer in San Antonio.
  23. I've owned my SSS for 7 years now and for the last year or so my Radio has stayed on with the ignition off and the door open. It would stay on for a few seconds and shut off. Ocasionally I would come back out to the truck and hour later and the radio would be on. Last week I went out to the truck and the battery was dead. I figured the thing was about four years old and with this texas heat and it was time to get a new one. Installed a new batt and now after about 30 ignition cycles the problem seems to have gone away. Does having a FULLY charged batt make a difference? Or am I just lucky? Just wondering if anyone else has had a similar problem? P.S. I have a pioneer flat screen which was installed over three years ago. Had an attempted theft recovery 2 1/2 years ago where they tore up the column pretty good had to have both the switch and the stereo replaced.
  24. Check this site out: http://www.transmiss...r.net/4l60e.htm I dropped a Mega Raptor (700R4) into my '88 sileverado, it has a stroked 350 (383) which was estimated at 450 HP. I went to this company after breaking the Planet gears housing and also had a cracked reaction shell. These guys offer a level three and level four 700E (4L60E). It's at least a good read on general performance transmissions. If you have a reputable builder in your area, you get the HD parts from these guys. Their customer service was great and I had a stupid newbie question trying to set up my TV cable and they were very patient and got me on the right track. My Silverado SS has 118K and I'm starting to see and hear signs from the tranny. I'm going to call these guys when the day comes. Oh yeah, they'll also be able to get you the right torque converter to meet your needs.
  25. Do we have the CNC file for the bowtie emblem? Sure would make it easier.
×
×
  • Create New...