-
Posts
164 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by KDavis04ss
-
2003 Kenne Belle Supercharged + Much More
KDavis04ss replied to rwoodards's topic in SSs & VHOs Only
anyone know if this truck is still for sale? -
Someone make an offer. I Doubt il refuse a reasonable offer. Need it gone.
-
Im selling my SS Silverado. Had it since February of 09. Just as clean today as the day I bought it. Has 102K. Iv only put about 2500 miles on it since January. Has 6.0 ceramic coated longtubes nice exhaust. 3000 Circle D converter. goodmark cowl hood. HID's, Fully loaded leather/heated seats. Inside is flawless. Shackles in the back. Sits nice and level. 5% tint all the way around. Things that need to be fixed: Drive side collector needs a new bung welded on for the 02 sensor. Sensor is still good. Bung cost about $5 and muffler shop to have it welded up. The transmission slips under a heavy load. BUT the truck will come with a Brand new never installed Performabuilt level 2 transmission. I just dont have the time to install it. The tranny only cost $1940. You will get the receipt for the trans and can call Performabuilt to check when it was built etc...Also the paint is chipping off of the back bumper. Just needs a quick paint job. This is a very nice truck for a great price with a new $2k transmission. DOES NOT COME WITH WHEELS IN PIC 912-258-two three four two
-
exact same setup I ran last year. Nice run. What kind of exhaust to do have after the Pacesetters?
-
Z06 Caliper Mount / 2" Drop Spindles / 15" 2Pc Baer Rotors
KDavis04ss replied to BlownFogger540's topic in For Sale/ Wanted
what brand and part number on the spindles? pm me if you dont mind please. thanks oh and price shipped to 31525 -
Didnt Think There Were Rednecks Out Side Of The Usa ... Lol
KDavis04ss replied to idahoBLKss's topic in Video & Photography
you might be a redneck if... -
how many thousands of people on this site and only 35 people want shirts? come on people its only $20
-
Il take a White Large size please.
-
turn the boost up on that beast
-
congrats man. can you post a quick run down of your mods? obviously not all of them but the basics
-
I guess a 9.60
-
That a little heavier combo than I was looking for but still a good looking wheel.
-
What do they weigh? Ever weigh them with the 305/45s?
-
Hopefully Norcal sees this. This is an old thread I started a while back. First off, Rustoleum has about 6 different kinds of paint. lol. I didn't get the cheapest rustoleum in the white can I got the silver can thats about 5 bucks a can. I got to reading the label before painting the rotors and it says dont use on anything that gets 200 degrees. Do rotors get that hot? I want to make sure I got the right semi gloss rustoleum. It says Professional high performance enamel on the can. Hope someone can tell me Im good to go. Thanks,
-
nice stance. how much did you have to raise the front to get it even? I want to go 3/4 but dont want the racked looked so Iv been second guessing myself to go with a 2/4
-
man I have a mac book and hate this thing. Theres two options. Copy image, and Copy image address. I tried pasted both of them in the box. It wont let me paste anything in the box but it goes right into the signature. I can see the image when I paste it in there but when I save it, it just comes up with a long address with a square box and a question mark.
-
How do you get the sig into my signature? and what size does it need to be? I tried just pasting the photobucket link but it didn't work.
-
Damn I can't decide which one now lol
-
holy shit thats badass. Thats the one im using. Thanks for the help man. I really appreciate it. And I like the ProchargeD. I didn't even notice it till I went back and was looking at them.
-
Just Bought D1Sc....Now What?
KDavis04ss replied to KDavis04ss's topic in Forced Induction and Nitrous
Thanks. Il try and call tomorrow. -
nice times man. I may have missed it but whats your setup?
-
Well like I said previously, I wanted to go FI. So I bought this polished D1 from Rick Vor over on PT.Net. Its just the head unit so I have to get the other parts from procharger but my question is, now what? What size pulley should I buy? wanting to run 10-12 pounds. Thinking on going ahead and putting 60# injectors in it. Are the Siemens (spelling?) plug and play? I would also like some FI guys opinions on fuel pump. Walbro or Bosch 044? which have you used what have you liked or not likes about them. And who to tune it? Will most likely have to get a mail order then do the Autocal. We have one local tuner down in Jacksonville but Im not a fan of his work. Anything anyone can help me with with be appreciated. Thanks, Kyle
-
good deal also
-
I have $50 plus shipping to 31525