Jump to content

alex.t

Member
  • Posts

    1,662
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by alex.t

  1. cant tell shit if theres no name on it , mufflers all look the same basically . might just be like a generic walkers muffler or somtin along those lines.
  2. if thats the shift point right when you let out of it i wouldnt be to worried doesnt seem to high mines around that 6300-6500 . even so if you buy the truck get a real tune and you can get your shift points setup where you like em . id assume its got springs pushrods , can you tell if its got a stall ? id consider a little transmission work to .
  3. well guys finally after chasing problems with the truck for the last month and doin some other little things the truck is running the best it has since i did the cam swap over a yr ago .

    1. BLNAWAY

      BLNAWAY

      Glad to hear shes finnaly right...got alot of gone now haha...what issues whrre u having?

    2. alex.t

      alex.t

      well napa ****ed me over and i didnt realaize at the time , but they gave me 4.8 spark plugs instead of the actual ones so that was a problem , and my fuel issue ended up being a small pin whole leak in the fuel line that runs from the pump to the top of the basket. it eventually turned into a big slit and had no fuel psi . finally put in a wideband and a fuel psi gauge so i can monitor better, ended up throwing a filter and fuel psi regualtor into it before i took the bed off to look at the...

  4. never even thought about it once but yup ten years , ive only owned it for half of its life but its been good
  5. truck looks good , you guy barely got any snow there , still got like 3-4 ft here in the yard .
  6. belltech street shocks are pretty good ones i believe, lots of guys running them
  7. corsa magnaflow or borla is what id suggest
  8. still wanna do a new body style reg cab short box chevy slammed with a big front mount turbo .
  9. looks awesome , lovin the visor to, be cool if hes running a ls engine in it to .
  10. welcome man just over in sask here
  11. hmmm i donno man. maybe we just get worse times up here in canada ahahahah jk . drag racing has alot of diff factors into what your time can be at .
  12. hahah ya i did , spark plugs werent gapped right also my fuel pump was lackin and eventualy burnt out on me , everythings fixed now and running way stronger just havent been back to the track yet .
  13. http://www.SilveradoSS.com/forums/topic/74421-the-long-awaited-borla-sound-clip/ borlas here love em
  14. ok got to work on er today , turned the key on no noise at all from the pump this time , thought it might be the fuse swapped it out and nothing yet , took the filter of to and its clean so ive come to the conclusion the pump is junk . took the bed off this afternoon gonna take the pump out tomorow and see what i can find.
  15. will do man . thanks, ill give er a check . gonna start checkin everything sunday so damb busy with work til sat .
  16. lookin good man . need to come visit this yr for sure . do some cruisin
  17. thanks zippy for the info , no cats so no worries there ive also been reading on pt.net and there saying might also be the ecm b fuse. but ya ill see if i can get a gauge for the fuel . also for the walbro install i believe the part number i need is gss340 if i need to get one
  18. filter has been changed twice since ive owned including this spring so dont think its that. and its barely a start just enough for it to sputter. what modifications needed to drop in a walbro 255 or is it a direct fit.
  19. so driving to the lake everythings good to almost get there and bring my speed down. i notice it doesnt have any power above 2000 rpms , itll still run and drive though, so i park it and leave it for 3 days at the lake. go to leave everything starts and runs fine till i get about 20 kms on the highway , starts sputtering and loosing major power go to pull over on the side of the road and all of sudden regains power again so i get it to a side a dirt road and get it down to idle and starts running like junk again and eventually dies, wont start just turns over and runs maybe a second. i pushed that bleeder on the fuel rails and barely any gas came out . got my dad there to turn the key off and turn it back on which should prime everything up and no fuel coming there at all . what you guys thinkin ? if your thinkin fuel pump also would you just put an oem back in , i hear walbro 255 is godo but also unreliable , let me know what you think thanks .
  20. i know what you mean man , i got nobody in saskatoon here so my plan this yr is to jump over to alberta for a wknd. i dont see many people goin on tours though. everyones got jobs and familys
  21. cirlce d 3000 in it , no man you can buy those bowties from shopman .
  22. thanks guys , its belltech 2" spindles , keys turned to get around 3" , belltech 2'' shackles and djm 2" hangers. as far as the cam its a 222/224 566/568 112 , lt's no cats and two borla xr1 racing mufflers, i need some heads for this bad boy and an fast intake or somtin along the lines.
  23. hopefully that works . all the tails have been replaced now with black led taillights the red was standing out to much , gotta full gloss black grill to put on to this wknd, ill try and get soem pics or vids up , enjoy leave me some feedback http://s805.photobuc...nt=IMG_0009.mp4
  24. cant look at any of the posts ????? gettting the database error page

    1. MARTYW

      MARTYW

      Me too. Guess there are still some wrinkles in the site that need ironing out. I'm sure teh admins will strtaighten it out.

    2. eeekroar
    3. Krambo

      Krambo

      Admins are working on the issue! Hang in there!

×
×
  • Create New...