Jump to content

jtmarine02

Member
  • Posts

    240
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by jtmarine02

  1. No, not to all the LED bulbs just the one's that are designated turn signals. If you do not add the resistors to the turn signals you can experience "Hyper Flashing". You do not have to use resistors if your truck meets the requirements that Chase posted in reply # 26. This is what he said -you can also not add resistors to some of the trucks and get a electronic flasher relay for the earlier trucks depending if you truck uses the lm487 flasher it looks like this its located in the driverside knee area , near the ebrake and bcm , just turn on your hazards , unbolt your knee area lower dash cover and follow the relay click. that will determine what e-flasher you need , imo this is the right way to do it if you ever need to swap back its as simple as swapping bulbs..
  2. I actually got a FREE bottle years back, I think 2007, right about the time I left California. I got it at a car show for free as a gift for a promotion they were doing. I still have the sealed bottle, and recently found it after forgetting about it since i got it... I was, and have been, skeptical about its' actual performance, hence the sealed bottle... lol Give it a try and let us know if it works and how it works. Or I can sell you the one I have, I can double check that it hasnt gone bad...?
  3. Now that you mention it, I did just replace me Red top with a NEW Yellow top battery. Maybe the BCM reset itself...? I'll give it a shot. Thanks man!
  4. It's funny when you come across a fake SSS driving in your REAL SSS and they look away or drop their head down like if they were saying "Damn a real one, you caught me!" Had that happen a few times.
  5. I do not have any electrical wiring near my speed sensor, and my brake lights work fine.
  6. Welcome and great looking truck!
  7. The light isn't working but its because the actual cruise control isnt working.
  8. Yes but, it worked after the install and stopped working all of a sudden about 3 months later (now)...?
  9. What's up guys, so like the topic says my cruise control is not working at all. I've looked in the manual and checked the fuses and have found nothing wrong there. Is there another relay or anything else I could be missing? Thanks ahead of time.
  10. mazing looking Vette, I want your job... lol The ony thing I thought didn't fit well was the color of the exhaust tip, but that's just my opinion! I'd still take that vette in a heart beat if I could afford it:pepsicheer: !
  11. I did my buddy's stock radio in red LED's, not hard at all. Just remove the screws and pop off the covers, then make sure that the cable connections from the face plate to the radio are removed before removing the face plate. Also, to make it easier to know what terminal is Positive, take voltage readings with the face plate connected and label them as you take the reading. You'll have to double check on the lenght of the LED & attached resistor cause its a tight fit in some cases.
  12. Great Kill! I always get people getting to race my SSS especially the Nissan or toyota guys!
  13. What do the kits run? What did you get?, what did it come with? How much? Just wanted to get a bit more informed on the matter.
  14. very nice looking truck! Congrats!
  15. How about some pictures of them????
  16. Thanks man, you really helped me out! Looks like I know what I'm doing this weekend! As for the electronic flasher relay, that's great info! Should help out anyone out there who is looking at doing this! Even me if I ever need to replace the resistors.
  17. Yeah my Low/High and fog lights are all 10000K HID's. If you want a near perfect match go with 8000K HID's. My 10K HID's are a close match.
  18. Amazing cars! They dont make them like they use to... Glad to see that they lasted!
  19. you should use an exacto knife to cut the OEM film out, and have it to where it is just the blue gel sheet . Worked for me.
  20. Im actually in need of stopping by at your 9-5. I need to rotate my shoes.
  21. Read reply #11 above, I answered that same question. If your unclear or have questions about the items or sellers feel free to ask.
  22. Read reply #11 above, I answered that same question. If your unclear or have questions about the items or sellers feel free to ask.
×
×
  • Create New...