BigTex

Yeah, that was a fast sale. Perfect timing on that one.

Transfer case is SOLD !!! Thank you Tim.

I have the stock 4L65E transmission from my Silverado SS. I pulled it out when it had about 12K miles on it and replaced it with a FLT built unit. I kept it as a spare or in case the FLT ever had an issue. This transmission never gave me any problems. Had a transgo HS2 shift kit and servos installed when it had about 8K miles on it. Shifted nice and firm when pulled. $750 plus shipping. Also have a stock AWD transfer case for a Silverado SS. I kept this thing around as a spare in case I ever had issues with my stock case. Turns out I never needed it. So right now, its just been taking up space. $250 plus shipping. I'm in the DFW area. Thanks.

Thats funny. Brian does like to have fun. He may come off as a jerk, but thats because ... well.... But one thing is for sure, he will take care of you. I bought a used Radix a few years ago. I called and left him a message needing a few parts for the install. When he called me back, he starts acting like a police detective looking for stolen auto parts. Had me going for an instant.

Kevin, did you ever find any more info out about this? Just curious. You bought a spare T-case didn't you? I have an extra one if you ever need it.

Yeah, I messed something up in my transfer case once and think something minor may be wrong with the front diff too. I was turning left from a stop and had to get on it hard to merge with traffic. I lost rear traction in gravel and full torque hit the front wheels on the pavement with the wheels turned. Immediately I could feel and hear a grinding noise in the drivetrain, but it kept going. In a straight line, it was OK, but any turns would cause some severe grinding. I had the T-case rebuilt under warranty, but didn't get to ask the tech what went wrong. Sorry about your bad luck.

Yes, it is AWD. Sorry for the slow reply, I was out of town last week on business. I've had several people PM me about the truck. I'll try to get some pictures this evening when I get off work.

Don't forget about the fuel line block on the rail is different for an 04+ model. That part has two fuel lines for the 03 and older models and only one for the 04+ years. Someone else on here had to buy the complete box 2 kit to get that part, for over $2000 direct from magnusson (which also comes with the fuel pump).

Verch - where are you located? I have an 03 black SS for sale. 21,9xx miles in great shape. Never wrecked, non smoker. I changed jobs a while back and now have a company car, so the SS no longer gets driven. I've been dragging my feet on selling it because I don't want to regret it. Its almost completely stock as it sits right now. Its a naturally fast truck I'd think. When I first bought the truck, it ran upper 13s with bolt-ons. I added a Radix and ran low 12s the first time (and only time) I took it. I removed the performance parts over a year ago. It has a billet grill , a set of 20" chrome centerline Edge II wheels w/ stock tires, Bedrug, and 2" rear drop shackles to level the truck. Has XM radio but not On-Star. Pictures from last summer I have online: http://z71.net/t1.jpg http://z71.net/t2.jpg Let me know if you are interested, I'm reasonable on the price. I live in the DFW metroplex. Richard

I have an 03 with 21k miles. Black, with XMradio, no on-star. I rarely drive it but haven't been very motivated to sell it either. I realize its a bit far to Reno, but I'll work with you on shipping.

I've got a black 2003 SS for sale. Very low miles - (21,700 miles), non-smoker, stock with exception of mild cam. Disclosure: Overall in very good shape. I had a Radix on it and it ran GREAT. No issues there. Its been back to stock for the past year. One minor "shopping cart" style ding on the passenger bedside, about the size of a quarter. Mobile dent doctor could fix it. Bed interior is perfect since its been under the bedrug the whole time I've had it. Tailgate cover is scuffed some along the top from normal use, but just about everyones here is too. Needs a good detail and wax job. Upgrades: 20" chrome Centerline Edge II Billet grill Bedrug 2" rear drop shackles to level the truck Custom Comp Cams camshaft (~212 218 .580 lift 115LSA) with 918 springs and titanium keepers Minor tuning Pictures from last summer I have online: http://z71.net/t1.jpg http://z71.net/t2.jpg I also have a few performance parts specific for it if you are interested. Richard

PM sent

SOLD! Thanks Brad.

Yes, sale pending with shadowsniper3006.

Mine is still up for grabs.

No, these are 6L 317 castings. Yes, they are supposed to have the Judson ports. Talking with Brian Tooley about the specs when I ordered them, I was completely sold on their porting. The exhaust flow is higher than any other head I've personally seen while the intake flow is better than most others including stock AFR heads. The numbers speak for themselves: LIFT INT EXH .100 68 52 .200 140 118 .300 208 170 .400 267 215 .500 302 260 .550 319 272 .600 329 279 I haven't put these up on the other boards yet. I figured I'd give the SS guys first shot at them. Get 'em while they're hot! I have the build sheet and flow numbers packed in the TEA box ready to go.

TEA stage 2.5 6.0L heads - $1350 shipped I custom ordered these direct from TEA to run on either a high end 6.0L motor or a stroker motor I was planning on building. They have Comp cams double springs. TEA's competition hand finished porting. Intake flow is ~330cfm at .600 lift and exhaust is ~280cfm at .600 lift. Ferrea 2.05 intake and 1.60 exhaust valves. Titanium retainers and locks. 69cc chambers. These are sweet! PIC1 PIC2 PIC3

BSER Roll pan - not painted yet - new in box from when I bought it from BSER. $310 shipped.

Looking for a stock Silverado SS catback. Actually, I don't need the tailpipe or tip, just the muffler and stock the front pipes. Anyone in the DFW area have one they wouldn't mind parting with? I'd rather pick it up than messing with shipping if possible. I think I'll be going through Austin and Houston this next week, so those areas are OK too. Thanks Richard

I still have the grill, but want $125.

They sound pretty good. They were put on a project vehicle with a 427 and I thought it would be too loud, but it wasn't that bad. It had headers and no cats and interior was a little strong. On an exhaust with headers and cats, I think it would be fine. If you have stock manifolds, then there is probably nothing to worry about.

send me pics on the bowtie? did you paint it or did you have a shop paint it? <{POST_SNAPBACK}> I painted it with automotive touchup paint. I bought it off this site, so its exactly the same as nearly everyone else's here. Polished billet aluminum with CNC milled "SS" logo in the center.

More stuff for sale - - - - Bosch green top fuel injectors. Flow rate is roughly 49#s at our 58psi fuel pressure. I used these as an upgrade from the 42# Radix injectors to give me a little more breathing room. I have the proper flow rate and offset values, so tuning will be a snap. These are standard Bosch injectors, not shorty truck injectors so you'll need to space your fuel rail and use harness adapters. I'll include spacers and longer bolts. Not difficult at all, but not plug and play either. $200 shipped. Comp Cams 218 218 .563 .563 114 +2 cam. Less than 20K miles. $250 + shipping Comp Cams 212 218 .58 .563 114 +4 cam. Less than 10K miles. $250 + shipping Comp Cams 224 224 .581 .581 114 +4 cam. Less than 10K miles. $250 + shipping (2) MSD brand digital rpm window switch. Used to turn on / off nitrous at set rpms. These were mounted but never used, so in like new condition. $75 each NOS brand bottle heater. Like new in package. Has unused wires and sensors still in plastic. Tbyrne sells it for $215. $150 + shipping NOS brand 15# nitrous bottle. Blue color and like new. Has the built in gauge so you can see pressure without opening the bottle. Very nice. Tbyrne sells it for $220. $125 + shipping NX brand nitrous bottle opener (Purple). Used, but not abused. Works well to remotely open and close your nitrous bottle. Tbyrne sells it for $230. $150 + shipping New set of coil packs with frames. These are from an 05 LQ9 crate motor. $100 + shipping Magnaflow mufflers - matched pair of round 3" in/out 6" diameter 18" case mufflers. 1000 miles (from escalade project). Currently have a short length of pipe attached with cutouts on one side and a 3-bolt flange on the other. http://z71.net/magnas.jpg $125 + shipping Magnaflow oval muffler dual 3" in / single 4" out. Same muffler that comes with their 6.0L "HD" catbacks. 2500 miles of use. Worked real well with my cam and Radix. $100 + shipping

5 Piece set Billet Grill for SS trucks. Unknown brand. There are in good shape but probably need to be cleaned up a bit. I only ran the middle three, but have the two bumper scoop grills. PICTURE (I'll find a better pic later) $125 shipped Polished aluminum SS Bowtie. Painted black "SS" center - SOLD BSER Roll pan - not painted yet - new in box. $330 shipped.

Yes, I do still have the fans. Most everything else is gone though.