Biggsw784

i am in wichita falls tx(north texas). i am selling this because i am selling the truck man. thanks for the offer though

I have the complete spoiler with the brackets and all the hardware to install. everything is brand new and I have all the hardware from gm and the brackets were made using the factory bracket as a template. I can have pics on here tomorrow. the spoiler is not painted, its black gel coat that has been sanded smooth. I will ship it to the 48 for $315. These go for over $900 from gm. I do accept paypal.

$250????????

$270 Shipped, need to move, already ordered new cam!!

Yea you would have to get a new valve spring due to the lift.

I have a brand new Bullet cam. I stuck it in my 6.0 and degreed it in on the stand but bought a 2002 ws6 is I am going a little different direction since the engine is going into a car and not a truck. The specs are 240/246 620/620 @.050 on a 112. I was putting it in my l92'd 6.0 but going alittle bigger now. I paid $340 from bullet but will sell for $300 shipped obo!! I take paypal without charging you the bullshit fee. I have the box and cam card. Any questions let me know. Thanks

I ordered it straight from Tcs.

I finally got my converter in from TCS. It is a 3400 billet converter for a 4l80e. Hope this thing works good for my 408??!! Thought I would sure it with yall.

Wanted to share with yall my L92's I just got back from Richard at West Coast Cylinder Heads. These are going on my 408/4L80e project going in my 2006 Crew Cab 1/2 ton. I bought these heads bare from GM and sent them to Richard and he did all the cnc work and they turned out awesome. They flow 345 cc on the intake and 245 on the exhaust side at .600 lift on my 408. If anyone is wanting some bada$$ work on some heads, hes the one to send them to. Here are some pics of before and after. Before After Here some misc of the truck

If you cant read it, it says " GOTNX"

those are the injectors. i think thats what your talking about

Here is a friend of mines 1967 Camaro with a Duramax that is getting down to the last minute of leave for Drag Week Saturday. This fabbing started about 6 weeks ago and hoping to fire it up tonight. The twins are off a new cummins diesel that are electronic varible vains that we had a controller built to monitor turbo shaft speed and control the boost through this controller. The motor has stock crank and pistons, aftermarket rods and cam and the heads have been ported to the max. The sheetmetal intake was built by a friend of ours Greg Young. We expect around 1000 hp and about 1700 to 1800 ft lbs without nitrous. I will get more pics soon. Mike Woods' (owner of nx) duramax mustang and this camaro will be heading to up to Drag Week Saturday and will let yall know how everything goes. Both cars are going to be in Diesel Power Magizine.

i'll take the head gaskets. whats your paypal.

Anyone have any pics of relocating their coils on the fire wall or where ever. Like to see what all has be done to get some ideas. Also where to buy the relocate kits. Thanks for any help.

none taken brother!! thank you too bro!!!!

no they are small. maybe 1/4 in

around 15 or 16 man

thanks Brad

yea, he sells just the brackets for the end pieces which is were i got mine and i believe i paid $30 for them. he dont sell all the other torx head bolts and push in nut fasteners that are required to make it right. but hell i guess you could go to lowes and get a box of sheetmetal screws and be done with it. all i am getting at is that just buying the spoiler isnt going to be all you need to make this install right. all the necessary hardware to do it right is a all from GM besides the end brackets from 99ImerSSonator. if he sells all the necessary hardware then he still thinks mine was a good deal. this is a post he put on my thread on selling my spoiler "Guys there is over $100.00 worth of hardware here. If you are lookin to buy one this would be the one I get because you get everything you need to mount it with. All the bs is already done and all you have to do is paint and install it. Free bump for you. " so go through the bs i did to get part #s and so from GM or where-ever else.

yea i understand you can get them for $220, i got mine cheaper then that actually. But once you get that spoiler, I guess you can use sheetmetal screws to install it. Those spoilers off ebay dont come with the hardware to install it. So, if you want to do it the RIGHT way, you have to go to GM and buy the hardware. The brackets are not offered from GM, they only come with the spoiler from GM which is over $900. There are is a member on here that makes the brackets just as good if not better then GMs brackets. anyways, i bought all the RIGHT stuff from GM to do the job RIGHT not half-assed. the only reason i am selling is that i think that i will have a hard time mounting the end pieces on my crew cab with the factory plastic caps on the bed. really dont want to grind on either pieces to make it work. go to GM and go through the hassle i did to get all the part numbers and so-forth. that shit aint cheap. i will ship mine to the lower 48 for $330

http://www.silveradoss.com/forums/index.php?showtopic=55618 I still have this one

Where are all yall getting those carbon fiber front support covers???

how much did the front go for??

is this for l92 heads???

i would be interested in the front if it falls through. thanks