riddle

Pick up one off your brake pads, throw it over the two piston, and compress, you can even use big channel locks. Hell, not sure where u r at now, maybe you should disconnect the caliper and have it rebuilt, could off torn a piston seal by now? FYI, next time you need to remove the caliper for somthing like that, you can stick a screw driver in the top off the caliper and pry between the caliper and inside off the rotor, to spread the pads, U only need a little bit. ~Danny

They have a clear sticker sheat with like a greyish pearl in it, most auto trim places, can use that to make any graphic you want, and it has a ghost effect. I have seen it done with Flame's. looks preety good. Also, My brother Has Flat black "Rumble Bee" Style stickers on his Black Duramax. Looks Good. Instead off a BEE, it is a big Bow Tie.

@ this point U guy's could prolly P.M Each other. LOL ~Danny

Your Main Problem is your in ALASKA!! We Have VERY $hitty mechanices up here, @ least 80% are "Shade Tree" at best. So Because they cant diag, or operate Basic Tools, they Hold the Customer responsible to supply them with endless parts tell they get it fixed. Try having trans work done or any diag.! When I first blew my truck under Warrenty, I told them what was wrong and I had no Signal from the crank sensor. LITHIA Had there tech, call me personally asking for $250 to put plugs into this thing to get it running. Then Proceeded to tell me how the plugs being fowled are whacking out the EGR system. ADRENALINE shot through my Vanes as I told him to show me the F-ing EGR valve! then they voided my warrenty and held my truck hostage for $1300 in Diag fee's ~Danny

I am a No show, thats over 700mi round trip for me! but... in about 3 week's I am planning on running my truck in Palmer Also, Coffe Girls make Bank! My Woman was a coffe girl for a few years. She worked the morning shift and she averaged her pay in tips, to $17.00hr, and that's TAX Free! So she needed a job that she made at least $20 an hour to replace it. BTW, she was in anchorage all week, she jus left Friday. Also, 10zin, I t sounds like that chick aint comming, U gotta Realize, she gets hit on all day. So she prolly thought thats what u were doin. "Might be Busy" that means she is gonna try to be busy so she has an excuse to tell U next time u come by, LOL Bitch's anyway ~Danny

U guy's do know that Gallo's is a sit down resteruant right? Pretty good food, but it is not fast Food., Also If you dont know allready they pronounce it, "Guy-yo's". I didnt know that for awhile. ~Danny

I've been following this post,...And, I am pretty sure you guys will never meet up. (lol) This Has to be the worst "Meet Attempt" on SilveradoSS.com I still have a Little hope, that you guys will meet and post some pics of it. So I can see what I am up against. j/k 10in Hopefully you have better luck in AZ bro! ~Danny

I dont pay it. but If I have full coverage on my SS it would be more then that. Right now I pay $130 a month for Liability W/ Fire,theft and Vandelism. And when I take it off insurance, it cost me $45 a month, to have it parked with theft and vandelism only. Note: They charge you extra for Medical w/ your liabilty. U can Drop that. My Insurance Agent said that if you have medical insurance allready,( like through work ). then you are double paying. and pretty much everyone does it. I droped the medical on me, and saved almost $30 a month. ~Danny

looks nice any mods any plans? ~Danny

Ditch the Full Coverage... Especially if you are mechanically incline. ues that extra couple hundred buck your saving to buy your VETTE! Insurance Prices are outragouse. Full Coverage is throwing you money away. I can put a front clip on my truck for under $1500, that is about 4 months of Insurance! I waited tell I could buy mine outright, but it was used, only paid 20k. ~Danny

Damn Chase, waive 12k CASH.. I Guess that's how a baller do. 1967 Camaro Original MSRP: $2,572 Low Retail Average Retail High Retail Base Price: $9,850 $18,400 $29,900 Options 350 V8 Engine 4 Speed Transmission PRICE $11,985 $21,690 $34,715 Thats per NADA Guide classic car ~Danny

Bad link Chase, his page is Private.... ~Danny

I moved the IAT on the Motor Zippy's is mentioning to the boosted side, On a 25 degree day, under 10psi of boost my IAT temps before the throttle body were 190-200 degrees. I am running up too 180 degree's hotter then ambeint. And to quote, "a good tuner can compensate" Answer. I bought this Set Up for my specific truck, it had Vortech's Vin Specific program. No Other Aftermarket parts except a K&N Filter in stock airbox. And It blew up Badly!!! #7 piston was Shatered! rod bent, not much left. P&S Vortech was not helpful at All. and My Warrenty Got Pulled from me! ~Danny

YES... Yes they Do... Usually much dirtier then standerd issue SSS. Also contain many more rock chips! ~Danny

theres no price? ~Danny

have fun now, I wouldn't trade a summer in Fairbanks for anything, Enoy a warm 4th of July in GA` ~Danny

Wheels and tires, wheels and tires! That would be the detrming factor of what must stay or go! If you put on big rims, like a sport truck w/street tires, then.... You must get rid of the chrome bars, bed rails and nerf, fender flares as well. But if you put wide, larger off-road tires, then the flares and bars would looke good! Jus my opinion, at any rate the SS bumper has to go, The SS has a body kit on it that most people dont notice, it makes the truck "wider", so If you look at your bumper it is wider then your truck! ~Danny

only one of your links work. and it was torsion bar key's intead off spindles like YTTAF stated. I personally like spindle's so you can still adjust your suspension with the bars to get your ride height jus right without sacrificing suspension travel and the spring rate as much. Mine in the Sig is a belltech 2-4 drop, and it sits about dead level. no rake to it. ~Danny

I have the VR-6 and that thing kinda seems like a P.O.S, it just flops around in there, and the scoop doesnt really line up, Might be cause I have Vortech piping on the other side of the MAF. And whats up with the rubber elbow that fits loose on there? How did you get yours to work? I am dying to know! mine is still not on! ~Thank's Danny

Nice write up! I am thinking I may be in too, Thanks!~ keep us posted! ~Danny

What about putting your stock rear bump stops back on? That way when the truck squats it hits the bump stops? ~Danny

I am Scared off Cop's! There may be good ones, But I have had to many lie to my face, and it's your word against theres! U get a helpless feeling. They might jus shoot me sometime? and cover it up! LOL So after a few close calls,lol, I quit getting mouthy! Let them Lie, take the ticket, and fight it formally. ~Danny

Worked by Lightning!? Say it aint so Sounds Like you will have better Luck next time, Maybe we will see a 10? Good Luck next time, Keep us updated! ~Danny

I am here! I live in Prudhoe Bay Oil Fields, Most the time. LOL. My house is in North Pole though! A GTG In Palmer would be good in spring, so I can see how slow my truck really is! ~Danny

Looks Good Now I see why you opt, for all the polished stuff! People Actually see it! My hood only get popped 4 oil changes. (LOL) ~Danny