riddle

Welcome! I am out off Alaska 2. Born and Raised here! Pretty nice truck ya got. You do ALL the work? ~Danny

You have to call him on the phone.. I guess he gets tons off PM's / E-Mail. ~Danny

mine is filled w/viagra B.S. I spent alot off time on my garage so it would be nice to get real input. Thank's, Danny

They are the exact same. you will need a pickle fork, loosen the top 18mm nut, break that one loose, then loosen the bottom 24mm ball joint nut, but not all the way off, hit the top off the spindle with a bfh and they are loose! ~Danny

Those GM plugs are spendy, they are platinum/Irideum i believe? I paid like 12.95 a peice for mine? Generally, Turbocoop, all 8 plugs will not go bad @ once. you will get a p0300 multiple cylinder misfire, as a few off them become to carboned up to fire. ( could be accelerated by bad gas, extended idiling, etc.) for the wipers, your "wiper module is bad". I have replaced dozen's, and thats what they do. Sorry to say, but I am pretty sure you wont get anything out of them.( you have the BURDEN of proof) you have to prove they did it. On the bright side: You got off cheap, next time you go, you will know exactley how to handle the situation, Express no repairs will be made with autherization, (industry standerd). do not except the deal if you are not satisfied. Cost most people alot more to learn that. I got out off the dealerworld, cause they treat customers bad, and employees worse! lol ~Danny

The code is refering to , Incorrect voltage to your Injectors. (should be Batt. Voltage) Use your test light and probe the pink wire, w/ key on, see if it light's bright. second hook your test light between the pink and black wires and see if it light's w/the key on? u can use a paper clip to probe the connector, make sure YOU DONT SPREAD THE TERMINAL BY RAMMING IT IN, file down the end off paper clip if needed, to make it more narrow. Also Check EVERY fuse w/your test light. you never know what fuse is for what circuit, the lable on the fuse means nothing. ~Danny

the kit come with the correct injectors and fuel pump.

No You dont have too many miles. Yes, it is more difficult then what you do on f-16's. Yes, Your tranny will die, if you like to get in the throttle alot. Anything else? LOL ~Danny

I have A 3K Stall, TCI street fighter. dont be scared to go 3K. After Zippy Tuned the tranny it was sweet, When You take off with light throttle, 1/4 or so, rpm will hit around 2k and hover there while you accelerate. But no harsh engagements. You will also shift throught the gears, wayyy quicker @ WOT , prolly shave a full sec. of your 1/4? not sure feels that way tho. ~Danny

yeh, thats a pretty good deal. The Install on those suck. Vortechs directions are very confusing, you will need special tools,. I think you will spend 20 hrs on it your self if you are reasonably handy. especially your first one. Note: You may want to consider, "pinning your crank Pully". I didn't do that, and mine fell off, and it can ruin your crank!. Tho if it wern't for bad luck, I would have none at all. ~Danny

I am 24, haul. ( I work out of the Local 302. as a mechanic) Spend most my time in deadhorse. where I am at now, LOL I got a cowl Hood on the way now! gonna cost me about $650 shipped! Check out www.truckn.com (<<sweet prices, the shipping is actually cheaper then the calculator. Gonna hold off on spendin money for a little while, I am getting married in August. , lol I think I am good on the Engine, (Unless someone spanks me. then I will add the Juice, and lots off it!) Need 22's next., then move on two the Interior., but I am excited bout the hood. When I finally make it to palmer I'll P.M you. ~Danny

I am still around! , Stroked&Supercharged .. ( the truck is starting to get way nuts ) ~Danny

I know mine is consitant. not sure on accurate? If it is..... . ~Danny

I had to do the same after Efan's. Napa has a 145amp model available in there listing... think everyone should bank on getting an alternator.../good post ~Danny

Nice RTI ramp. , now lets see The SSS flex. Oh, and Welcome! Danny~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

appreciate the response . Yeh If It wasn't a big enough deal, to call and good it taken care off. prolly wasn't a big enough deal to post about it. I under estimated how many people these forum's access, and the negative effect it could take on a buisiness. For my end off this I appoligize, as you are correct, that I never called and gave you chance to correct it. Thank You, Danny

post pics!s les see them 24's. Imagine that would be difficult to lower much? idk? welcome ~Danny

I am gonna go w/ Neither. LOL Check out the Garage section as well, Alot of People have very nice profiles in there w/pics and info. Welcome! ~Danny

I think it is "DODGE" Fault. The Billions off doaller's they put into those, "Yeah, it's got a hemi" commercials. More people who know nothing about truck's, can Identifie w/ that phrase. Plus, "yeh, it can beat a TRITON" , does not have a good ring to it. and knowbody would know what ur talkin about. LOL ~Danny

Apperently NoOne cares about my fan Harness blowing backwards , lol Invoice # 4404, 4/23/08 purchased. Not a huge deal, kinda sucked though. ~Danny

that suck, I'll add fuel to this fire...... A couple weeks ago, I bought a GM fan harness from Nelson, $80. bucks. I Installed it and my Fans were blowing Backwards!! they were pushing. My dumb @ss, didnt relize wich way they were blowing till I was Overheating my $10k engine on a road test!! So I cut the Harness and switched it. BTW~ the Fans were Take off's of an 05 Tahoe, so I am guessing they were right. ~Danny (sorry to hear about your luck)

Good Color choice. Welcome! ~Danny

I dont know, I live 15mi, from an oil refinary, I live in a state that pumps out 200,000 barrels of oil a day. And we still pay some off the highest gas prices in the country. We cant get ethanol in Alaska, yet . But I am Intrested, I could run Soo much boost!! . Glad to hear your MPG went up! .......You Loose performance.? guess not? Most people around here think Ethanol is a big joke. Dont know where they get there info.? I would rather pay the $5 for bread, then $5 gas. ( I can live without bread! ) LOL ~Danny

I dont think they ment the nut is Loose. When I say they are loose to a customer, I mean they are worn out... Jack up the front off your vehicle and support your lower a-arms on jack stands. Have a partner wiggle your front tire's while you watch your suspension, If you see the stud part of your Idler or pitman arm moving with the center link foward and backward, they are worn out.. As for torque spec, I have a 1/2 drive titanium, w/a 21mm socket, and I let it hammer them down.. (Dont keep hammering after it is bottomed though, 3 good burst once it stopped moving should be plenty. Hope that help's ~Danny

here we go........ YZF 450, jus laid the new graphics out!! my crf 50 w/more mods then my SSS, thas bout it for toy's, Thank's Danny