riddle

K, I think this is note worthy, My brother trailered my SSS about 350mi to track, un hooked and Ran a 13.55 et. WTF? He is my older Bro, so Naturally he is always talking Garbage, and claiming wild stories about his truck! one of wich was that he would: "run sub 14's" the guy at Tech Inspection found it Amusing as well Maybe Older Brother knows a little more then I give him credit for . lol also, I posted my SSS, run in the street and strip section on here. ~Danny

S-trim, Correct. Thank's for the positive comment's. I feel less disapointed, the time's on this forum are harder to obatain then I thought ~Danny

Well, I finally got a time slip on my truck! I am 24 years old and thats the first time ever down the strip for me. So it was a long day trip! 700mi round trip, just for a test an tune Day. It was Last Minute, So I had a full tank of Gas, 3.0 pully, the truck was jus how I drive it everyday. we left my house a 11:30am got back at 4:00am. And My brothers Duramax that hauled my truck down in a 24ft enclosed trailer, ran a 13.55 @ 98mph, Then towed me 350mi home! DAMN Also, called Zippy Last minute and he shot me over a new tune in about an hour! Huge appreciation to ZIPPY! So, My best ET. was 12.63, best 60ft was 1.7400, truck could run in the 12.6 range all day, 60fts were in the 1.75 range. I was hoping for better, but it gets good gas milage(better then stock). and I can run a 12.6 from any stop light in town? So I am tryin to chear up. . lol Also I would spin all the way to the begining of 2nd. You can see and hear it in the video's. ~Danny

I think w/o the full tank, and a 2.8 pully, could run low 12's, also I think I may need a traction additive as well, I was spinning the whole 60ft, not real bad, but you can here and see it from the video. ( They were saying the track was slick that day, Guess they usually put down VHT? ) Thank's Danny

Had a last minute chance to go to the drag strip, called Zippy, he had me a tune in about an hour from the time I called him! I was able to get my truck programmed jus in time. Also, truck ran 12.63 et, truck is getting great MPG as well. Zippy good to work with, look to him for good tunning experiance. Thank's Zippy! ~Danny

good one ~Danny

K, jus gettin settled back in now . Long day yesterday, left fairbanks @ noon, got to palmer @5:30, left track bout 9:30, got home @ 4am today. 700mi trip jus for Test and Tune. lol, then my brothers crew cab long bed, duramax that towed me down, almost beat me! lol Sooo, best time: 12.634 @ 104.43 ( can run consitant in the 12.6 range) best 60ft: 1.7400 ( consistant 1.75 range ) Last minute trip for me. So I had a full gas tank and a 3.0in pully and no ice for my intercooler. ( wish I would have brought my 2.8 pully? but what the hell.) And I had a big Issue with traction! The truck runs good, I can get 17mph hwy on flats. so i guess not bad for a vehicle that is driven dailey. Will post video later! . Props to Zippy! I give him a last minute call and he had me a tune in an hour! ~Danny

Thank's, Hopefully 5pm when they open. Keep ya posted. ~Danny

Driving down to PALMER, try to get a time slip on this BadBoy .. I'll be there tommorow, 8/13/08 (Wednesday) test and tune. so If youy guys are out tommorow I'll be there. ~Danny

mine does it too, I believe it may be a faulty IPC? wich have an extended warrenty? not sure? mine has done it bout 3 times. ~Danny

way to go! ~Danny

The 2003 has a return type fuel system, so it can regulate the additional pump. My guess would be the 04 could not compensate for having the added fuel pressure down stream. Definateley need Injectors, my kit came with two sets ! but I have no Use for them any way, I am running 60lbs. BTW, If I remeber right, You are planing on comming back to Alaska correct?? The Vortech Is a terrible system for AK, Definately re-locate your IAT before You drive in winter AT ALL. ~Danny

Pull starter, check the torque on the tc to flywheel bolts. ~Danny

U type codes are comunication line codes. (network problem) Not part related. P is powertrain fyi. I wouldnt pay the repair Bill, and ALWAYS ask to save old parts. You are paying a profesional to properly diagnose and repair your truck. that is the service you should get. Anyone can guess and throw parts. thats not what you signed up for. If it is a broken wire, proper diagnosis , (following flow chart) would Identified that right away. Check ETC fuse, sound like a bad wire in the TAC wiring, and that would cause the serial data line code (u107) FYI, warrenty labor on TAC, is .2 hrs and up to .3 on diag. throttle body is 1.0, add .2 for 3 peice engine cover. Good Luck, sorry to hear your troubles. ~Danny

You can Drive @ 15 where your from? Welcome to the site! let us know what you buy. If they are that low in price, I should buy another one! ~Danny

Looks great` ~Danny

I like it! Yeh, pictures never do your truck justice. Bet it looks great in person! Prolly get alot of compliments. ~Danny

I am running General Grabber UHP's right now, Great tire BTW. I have 285/50r20, and they rub the inner wheel well, in front of the front doors. "You cant here any thing, but if you look in there u can see where they hit." I have like a +22mm offset, same as stock, I believe? I think your going to rub.. those tire's do look beefy in a 285, and tuck nicely. ~Danny

You nver said what Engine?? Rockers are non-adjustable in the LS engine's, as stated earlier. ~Danny

I work for ASRC as well.. , Union Side, (Houston). local 302. ~Danny

Welcome! You guy's are great to Honor your freind like you are! Hope I Have Great freinds Like Dustan. Good Job. What is your current ride? ~Danny

Welcome to the Site. I am a fellow Alaskan as well. Interior Alaska, Fairbanks. 3in1 rotation? never heard off it? who do you work for? I am 4in2 rotation., cool n E way. ~Danny

At least He has great freinds, I am sure his freinds and family were the Highlight of his life! Great Job Guy's, sorry for your lose.. ~Danny

Thats cool you wrenched out your truck. I havn't ran Mine!!. I wanted to run King of Street, this next weekend but... I dont think my 8 rib pully's will make it in time . ~Danny

14 sec is exciting! that is gonna need to be about 400hp to get ya there. w/your truck. Your engine in it now is only,180hp. low 18's @ best. Welcome! ~Danny