Jump to content

bad88t-top

Member
  • Posts

    108
  • Joined

  • Last visited

Previous Fields

  • Owns
  • Silverado SS/VHO/TrailBlazerSS Color
  • SS/VHO/TrailBlazerSS Year

bad88t-top's Achievements

SS Member

SS Member (2/5)

0

Reputation

  1. Does anyone have any recommendations on how to check pinion angle. I'm also fighting a vibration inthe rear going down the road and it's driving me nuts. I've already installed a 2 degree shim kit (fat side facing backwards) with no improvements. Brand new tires and fresh balancing as well.I've never measured pinion angle before but can't be that difficult. Let me know and thanks. BradSS, Did you ever get your problem figured out?
  2. http://pittsburgh.craigslist.org/cto/3306343262.html Call me or email me with any questions. Thanks, Bill Possibly partial trade for Duramax or Cummins crew cab.
  3. I'm looking for a used Corsa Sport or Touring exhaust for an 04 SS Silverado. I really don't need the tip but am willing to take what I can get. Let me know what you have or give me a call. Thanks Bill 724-612-5315 PGH PA If you have another system that will work let me know what you have for sale. Thx
  4. I have one out of my 05 SS that was replaced with an Escalade cluster in 2007. $300 it's yours Bill
  5. I'll check it out. Can you guide me in the right direction on what fuse controls the power seat and heat? Also, is the drivers and passenger side on the same fuse? I appreciate your help on this.
  6. So, i got in my 04 SS this morning and discovered the heated seat wouldn't work on the drivers or passenger side then I found out the power seat wouldn't work on the drivers side either. I checked all the fuses and they all seem to be good. When you push the heated seat button it does nothing. Has anyone else experienced this issue and if so how did they fix it. If it's a fuse issue can you guide me to which one I should check next? Please help! Thanks: Bill
  7. So I've been fighting this vibration due to lowering the back of my 04SS AWD w/ shackles. I discovered I have about 1/16 of play where my driveshaft slides into my transfercase. It appears to be more than normal from what I have w/ my other cars. Is there a bushing in there that can be replaced? Has anyone ever had a transfercase apart on one of these? Any recommendations/help would be greatly appreciated. -Thanks
  8. Well, I found out SS AWD's come w/ a 1 piece drive shaft so I have no carrier bearing or bracket to worry about. I did discover when I installed my 2 degree shim kit I put the fat part of the shim on the front of the rear end and not towards the rear as MR P recommends. This weekend I'm going to flip them around to see if it makes a difference.
  9. Sweet Saleen by the way. I have an 88 Saleen T-top car that runs 10.50's on drag radials. I love them cars.
  10. Hi guys: I was just checking out my truck and I don't even see a carrier bearing on mine. I did find a bracket welded to the cross member but no bearing or anything of that nature. I did find something interesting though. If I grab the drive shaft where it goes into the transfer case I have over 1/16 of play, more than there should be. I'm thinking that's the start to my problem. I also noticed when the previous owner lowered the truck and installed the pinion angle shims, he put the fat part of the shim to the front side of the rear end. I'm thinking these are backwards. I'm a little concerned about not having a pinion bearing though. Any ideas?
  11. Thanks 1Bad2K: Can I just remove the bracket or do I need to replace it w/ a relocated bracket? Any info you can supply us would be greatly appreciated. Thanks again
  12. Leviticus, I have the same exact lowering system and am experiencing the same exact vibration issues. I already installed a 2 degree shim but it didn't change anything. My next step is to try a 4 degree shim and if that doesn't work probably shim the transmission mount up 1/2 inch and see what that does. I'm about discusted at this point with it.
  13. Hi guys: I really need some help w/ my 04SS AWD. I've only had the truck for a year, but it's done this since I bought it. I have a really bad vibration under hard acceleration. The truck has 2" drop spindles and shackles on it so I originally thought it was a pinion angle issue. I've since added a 2 degree shim and it made no difference. It also vibrates with the stock and also my 22" wheels, so i eliminated that from the equation. It feels like it's coming from the back but I'm starting to think it's coming from the wheel bearings or front diff bearings. The more I read on this site it appears the pinion angle is probably where the issue is. Any information anyone can provide me would be greatly appreciated. Thanks: Bill Woessner: PGH PA
  14. Sorry guys: I only clicked submit once but there was a long delay before it posted. It's an 04 SS AWD, Cold air intake, Flowmaster exhaust, Electric fan conversion, that's about it. I'll probably never install a super charger but probably some head work and cam in the future. I also need a tune as well. Thanks guys
  15. What a great deal. What kind of tweaking did you have to do? What's the difference from an SS and 2500 HD anyhow?
×
×
  • Create New...