usabodyguard

This is a billet battery tray for the full size RED/YELLOW Optima battery... this is a custom cnc piece and made of THICK billet material. This is brand new, comes with hardware... $95 Shipped Billet 3D flame billet pedals - just recently polished new looking, very thick billet. I paid $140 for these... $75 Shipped This next piece is a BILLET master cylinder cover... you MUST measure your current Master Cyl to make sure this will fit... evidently there are different sizes, this didnt fit mine. $75 shipped

I have that exact model as one of my CCW weapons... I wish I had gotten the 5" barrel instead of the 4" barrel tho. Otherwise its a badass gun... my kit came with a innova tactical gun light as part of the package.

I use Adam's Poishes... you can use this code - 427LSX - for 15% your entire order! They make some outstanding stuff... just not sure what to recommend to you!? They have an online message board too you can join and post questions, its a very informative site. http://www.adamspolishes.com

Chris - Thanks, I dont know what I have into the truck, nor do I really care, its not like I would ever get my money back out of this... no one does, you should know that - you tried selling your truck recently. 104k miles? Wow, you drive ALOT! I dont drive mine daily, I have a great DD, but I do plan on driving it more on weekends and such, once the tune is finished (this friday). Plus it is winter time, and I will only drive it on sunny days. Im not sure if you know but I did most of the build in my shop, the entire engine swap, SC install, and all of the engine bay upgrades at my shop with the help of a friend, so I too can say, I built this. I installed the caltracs, I pulled the trans and installed the new driveline, I ran new trans lines, and the fuel system was entirely done by me too... I didnt build the surge tank, but other than that all of the old lines were pulled, new lines run, reg installed, meth system I did...basically most of the build I did at my shop, other than paint, and brakes - which anyone could do, but wilwood wanted to do them for the mag. I have a complete build thread on PT.net, which Im sure most people have seen - you can see a lot of build pics there. Yea I agree, the glory is pretty much over, and the magazine hasnt even come out yet... but my goal has been met, so Im happy. As for audio, I pulled my entire system and sold most of it off... I plan on doing a new setup this winter (jan-mar) but I can tell you this, im going with a pair of JL Audio 13.5" TW5's under the rear seat in a custom enclosure that attached to a new center console that goes all the way up to the dash... in the center console I will have the amps partially on display in some custom configuration. I already have the subs, so im set there. It will be clean and sleek to match the trucks appearance - last thing I want is some obnoxious system with 100 subs everywhere, that's not my thing. I did use a lot of the stuff I bought from you, thanks. I doubt I will have any TV's although I heard you have 5.1 in your truck, that must sound killer... I dont I will go that extreme! Plus I want to start on a new project very soon... more on that later.

Hey of all people you know better - it takes time!!! whats next? Enjoy driving it, and start on something new!

with your setup you should be running high 11's... but im sure you have 500lbs of stereo equiptment!! Very nice truck.

Thanks for the kind words. And with all humility I could not have done this without the help of so many of you on this site, I know I spent a few hours on the phone with you Steve, picking your brain! Thanks to everyone who helped in this project! I know it may sound silly, but it's been a lifelong dream to have a cover vehicle on a magazine!

A company in florida, IN THE NEWS, does custom board mounts for magazines and such... they called me today and had gotten a few early copies of the magazine, they scanned them and showed me... for now here is the cover... i will post the rest later. In the article i mention this site and pt.net too!

I have a nikon 70-300VR lens, I have literally used this less than 5 times... it has just sat in my room, boxed up - lens comes with original box and all paperwork, plus a pro UV filter ($60 filter). This is a great lens - I took this shot from 250 yards away I am asking $475 shipped... (I have this listed on craigslist for $460 but I added $15 bucks for shipping) This lens just sits so I figured someone could get some use out of it... it is a kick ass lens! This has the VR (vibration reduction) feature which dramatically reduces vibration.

Im so glad you ditched the 370 plan and stepped up to the big boy club!! Awesome and welcome lol... Thing should be a beast, like I said on the phone, do it right the first time, even if it takes a year or more... dont half ass it! do I see a future HP cover truck in the works?? Time will tell... congrats bro

These have just been recently polished to new condition... these are not the cheap ebay BS pedals, these are solid billet pedals in a 3D flame design. This picture doesnt showcase the finish... I paid $140 brand new, they've been sitting for awhile, just had them polished... $70 bucks shipped - paypal accepted.

I have an 04 with only 150 miles, but its not an SS, just a ECSB, with a few mods... lol $75,000

When you described them to me on the phone I didnt think they would look as good as they do, especially the text only you are putting on the sides of the cowl... Badass!

I have a good friend who is a fire captain in norcal, he said his ambulances get pulled over occasionally when they are on a code 3 call - lights and sirens, because they were driving to fast... having a badge does not make you above the law, but occasionally there are cops who think so - and this is what happens. He should be tried to the fullest extent of the law and then some.

but I guess we're smarter because we dont live in areas where we have to worry about that, or tornado's or dust storms, etc... sure we have earthquakes, once every ten years or so, big deal lol at least I dont have to worry about driving on ice while a tornado comes and picks me up and drops me on a wicked witch in a land of little people lol

Yea chase? Thanks, last thing i really wanted to do was re-route it, it routes ultra clean now, super stealth, you dont even know im running it as I am spraying from the bottom and running the line behind stuff. I will leave it, but I am still doing a new CAI tube, something seamless... I may go down to Magnaflow and have them bend me 1 piece of 4" stainless, and then goto - AmeriChrome PVD coating, the same company that PC'd my blower, so they match exactly - wtf who goes through all of this for a stupid CAI tube?? The date for the final tune will be once the CAI kit is finished, but most likely next week. Village roasters got shut down about 5 weeks ago, completely. Cops posted up at each entrance and didnt let any custom cars in, so they have moved it out in the middle of the valley somewhere, and I dont know where. I will be taking it to the Motors4toys event that rob and I went to a few years ago, it is Dec 6th, and they are expecting a couple thousand cars - all customs, open to anyone... Im gonna post a meet up about it later.

Honestly Ivan, I have no real solid idea of how much it will make at the wheels, remember I am going through a 4l80 too. At 15 PSI and meth I should make some decent power, but there is nothing worse than speculating HP imho... once I have numbers, good, bad, or otherwise i will post the results! I DO remember that... people said not to do it, but the pictures really dont do it justice - the silver is very metallic with a blue pearl mid-coat clear, with a clear over that. The graphic separation line is actually real silver leaf which comes in 4"x4" squares which had to be applied one at a time around the entire truck - i think he put on over 120 sheets of silver leaf on the truck. Yes I think they were refering to my truck?? thats some exaggerated numbers tho lol No there is no matte finish, it is glossy, maybe your screen or the pic? I will enjoy it once it is fully tuned... I had a basic tune on it just to get some miles on it and seat the rings, the new motor maybe has 200 miles on her, so we are close. I took off my CAI tube as the finish doesnt look all that great, I am having a new 1 peice 4" mandrel bent piece of aluminum bent and then I will chrome it or powder coat it to match the blower. I am also rerouting my meth injection to be a little more efficient, right now it is too far away from the TB, and I want to put it just in front of it. I still have a couple of projects left - a couple of suspension upgrades, and a complete system.

Thanks hahaha the blue flash? is that what youre calling it? I too have a name - FPQ (F'n Prom Queen). We are going to finish the tune next week and we expect to see 750rwhp+ on 15psi with meth... I will post some dyno sheets too.

its actually a skid pan at the sheriff's EVOC center... the track is polished cement and they flood it with water, simulates driving on ice, they use it for training purposes, but makes for good photoshoots so the rent it out to magazines regularly.

thanks, but the truck was totm in sept/oct '07!

I promised to post some finished pics of the truck, these were taken last month for the upcoming article... If you pick up this months issue, my brake install from Wilwood is featured... next month it will be the cover truck for the annual HP edition of Truckin'... and these are a couple of pics from that shoot. I made this truck board in photoshop too - it is 20" x 30" laminated and hard foam backed and yes if anyone wants me to make one for their truck hit me up

black is my choice, it will make it look more agressive.

If this were a contest i think I would be in the top few, even with sponsor help. damnit

they banned you lol

Batman and Robin, ftw