5752

Is this the correct Belltech street performance shock part #'s for a '03' Silverado SS AWD @ stock height? Front = #146-310400 & Rear = #146-2212FF? Thanks, Tim

Is this a kit or just the polisher?

Sent PM

I'll go $70. w/shipping included if no one else is interested. Let me know, I can paypal today. Tim

Whats the GM part # on the remotes?

Looking for a power seat memory /heat module {mounted under the drivers seat}.

PM Sent Tim

My 2003 Silverado SS drivers seat is doing the same thing. I replaced the heat seat {butt} grid on the drivers side. The LED's will stay on for less than a minute. When it turns off, you can here a click coming from the memory / heated seat control module under the drivers seat . I'll try replacing the back heat grid too. If that doesn't work I'll replace the module.

My 2003 SS has a stock motor with a P1SC / 8lbs of boost, 42lb delphi 8.1 marine injectors, & Blackbear tuned. Truck has 86k {40k when I installed the P1SC} on it & runs great. Do you think LS2 valve springs & LS7 lifters would improve anything or better left alone? Thanks, Tim

Ya, the switch for the electric seat might be the culprit - it still works so I'll wait until it sh*** the bed before replacing it. As for the ass heat, I replaced the butt grid & the switch still shuts off. Maybe this switch is bad too.

My left front speaker went out last year so I replaced both front's - I thought it was the amp. Make sure you check both speakers before replacing the amp & or radio.

My seat adjustment has acted weird for about two years: Forward = Backwards & viceversa. The lower part of your heat seat probably needs a new grid. Check out: AutoPartsDirectToYou.com

Installed the Hotchkis Kit {front & rear} six years ago. The rear sway bar brackets require some drilling into the frame - no big deal. Overall I'm very satisfied with this kit.

I installed the ssbc kit on my '03' SS http://www.autoaccessoriesgarage.com/Brake...ado_Pickup-2003

Heating coils on the butt & or seat back are shot.

Does your hydraulic brake booster fit flush against the firewall?

What's the GM part # for the new hydro power steering pump?

I'm not sure - with the stock motor & p1sc = maybe just under 400hp to the wheels?

Yep, save them for me - get paid on Wednesday. I'll be installing them on my 2005 Bonneville GXP - so I also need the DRL 3V Relay - got any? I need one relay not two, right?

Thanks for the info. Hey, have any 6000k, low beam {9006} Maxcarhid's left?

Crank is not pinned yet - checked & it's still tight. Slippage isn't bad - belt, stock tensioner, stock idler pulley, & p1sc idlers are new. Expensive pullies = better belt wrap?

Anyone install a 100mm Reichard Racing pulley {upgrading the oem idler} with the ATI Procharger P1SC? Does it fit...? Any clearance issues with the sc main bracket? Tim

Anyone install a 100mm Reichard Racing pulley {instead of the factory idler} with the ATI Procharger PISC? Does it fit...? Any clearence issues with the main bracket? Tim

Vikes should go all the way if: -The defense shows up for the next three games. -Coach Childress lets Favre have the freedom to run the offense.