QuickStyle Posted May 15, 2018 Report Share Posted May 15, 2018 did a 2/4 drop on my awd with spindle and shackle/hangers a couple months ago. yesterday the left front axle inner joint popped off. from what ive gathered on here is 2 inch's is the most you can go without problems. well im having the problem at 2 inches. so i want to install some cv axle spacers cause it appears the joint is being pulled out of the housing, didnt really break anything except for the boot. so what size cv axle spacers should i be running, i was thinking either 0.5" or 1.0" Quote Link to comment Share on other sites More sharing options...
batman28 Posted May 27, 2018 Report Share Posted May 27, 2018 I added 1/2 inch would of added 1 but they were on back order Quote Link to comment Share on other sites More sharing options...
QuickStyle Posted May 31, 2018 Author Report Share Posted May 31, 2018 well i added 1 inch spacers on each side and the axles still had enough play in them to where they aren't binding up. i put maybe 30 miles on it like this over the last 2 weeks. seems to be ok. part number for the spacers is 10805 made by tuff country. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.