red03 Posted August 3, 2017 Report Share Posted August 3, 2017 Okay.....not so much of a bet, but more of an argument. My friend recently purchased an Arrival Blue 04 SS. To date his mods are as follows, Longtubes, catless y pipe, shift kit, servos, tru cool 40k, Blackbear Tune, e fans, and just finished up the TBSS intake manifold swap with 36lb flex fuel injectors. He is now wanting to do a camshaft. I told him I thought a good all around off the shelf cam for his purposes would be a BTR Stage 3 truck, or the Vinci Trucker low lift. He found a local who stabbed a Howards Rattler cam in a 5.3. The specs on the Rattler are 226/234 at 050, with a 109 lobe separation angle. He is just wanting to do a 2800 or 3k stall. I think that cam is going to be overkill for that truck. He essentially wants it for sound. Do you guys agree that the Howards cam would be a bad decision? I know some of you run larger cams. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.