Tximonsteritx Posted December 2, 2015 Report Share Posted December 2, 2015 I bought some ss seat and forgot to get the wire harness from it. And when I did someone had cut the ends of the connector and now I don't know which wire goes with which. Any help or idea? Quote Link to comment Share on other sites More sharing options...
BlueAKSSS Posted December 2, 2015 Report Share Posted December 2, 2015 If you just want the power functions to work just run a 12v constant fused wire to the heavy gauge orange wire on the SS seat and connect the black large wire to a ground connection. It will be the same for both the driver and passenger seat. Quote Link to comment Share on other sites More sharing options...
Tximonsteritx Posted December 2, 2015 Author Report Share Posted December 2, 2015 My driver seat plugged up and actually had power so I ran power to the passenger one and they both have power. The reason I need a harness is because my air bag light is on and I have multiple code that are all coming from the seats Quote Link to comment Share on other sites More sharing options...
1FASTBRICK Posted December 2, 2015 Report Share Posted December 2, 2015 Being an 05 you probably need seat with sensors in them. If the seats were from an 03-04 it will not have them. You will like have to remove them from the old seats and transfer them over. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.