mctwist77 Posted August 21, 2015 Report Share Posted August 21, 2015 Alight guys so I have a little dilemma. My truck has 95k on it and the shocks are completely blown, the ride is horrible and they need to be replaced. I bought the OE height Belltech Street Performance Shocks and plan on putting them on. But I also plan on dropping the truck 2/2 either next summer or next fall once I get back from deployment and the truck is paid off. Question is, how will the ride quality be with the 2/2 drop and the OE height Belltech Street Performance Shocks, compared to the 2 inch lowering Belltech Street Performance Shocks. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Chip Posted August 21, 2015 Report Share Posted August 21, 2015 Iam in the same boat get ahold Norcal on this site I belive they are the same for stock to a 2/2 drop?? Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted August 21, 2015 Report Share Posted August 21, 2015 i always set up the rear shocks shorter even on stock height trucks. As long as fronts you use spindles will be fine. DONT do keys for 2 inches Quote Link to comment Share on other sites More sharing options...
mctwist77 Posted August 28, 2015 Author Report Share Posted August 28, 2015 Ok,just to clarify. If I run the 2/2 belltech drop with OE height Street Performance Shocks I will be fine? I don't want the ride being too rough. I'm assuming the only negative effect will be that my shocks will wear quicker. Can anyone chime in? Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted August 28, 2015 Report Share Posted August 28, 2015 yes but the belltech sp shocks will ride better than oem. I just did a set up monday Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.